Pulaski Furniture A136-097-041 User manual

Multi Media Wedge
Model: A136-097-041
Assembly Instructions
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Care and Cleaning
Contents of Cartons
1 Made in China
Dust often and use a vacuum cleaner crevice tool to clean seams. To maintain the fabric appearance, gently clean soiled
areas with a soft cloth dampened with a mild, water based detergent. Remove all lather and wipe with a clean, damp cloth.
Dry with another soft cloth by blotting the damp surface (do not rub).
Spot Cleaning Fabric: Blot any spills immediately; do not rub. Blot away the excess liquid with a clean, dry, white cloth;
turning the cloth frequently.
Do not use common household cleaners, solvents, or dry cleaning fluids on fabric furniture. These cleaners may cause damage.
Do not use or place sharp objects on upholstered furniture.
Do not place furniture in direct sunlight and keep furniture at least 60 cm / 2 ft from heat sources to avoid fading.
x1
Multi Media Wedge x6
Legs

Multi Media Wedge
Model: A136-097-041
Assembly Instructions
2 Made in China
Attaching the Legs
Zippered area under the wedge holds the Legs, Power Transformer and Electrical Cord
Power Transformer for Bluetooth
Electrical Cord for Electrical Outlets
and USB Ports
Legs
Locate the legs inside a zippered area on the bottom of the wedge.
Attach the 6 legs by screwing them into the bottom of the wedge as shown.
Also in the zippered area is the power transformer for the bluetooth controls and the electrical cord for the electrical outlets
and USB ports.

Multi Media Wedge
Model: A136-097-041
Assembly Instructions
3 Made in China
Bluetooth Controls
NOTE: Have your Bluetooth device (phone, tablet, mp3 player, etc.) turned on before starting.
STEP 1: Press the POWER button. Button will glow red.
STEP 2: Press and hold the POWER button. The other buttons will glow blue. The Power button will blink red.
This indicates the system is searching for an available Bluetooth signal.
STEP 3: Tap the settings button on the phone, tablet, mp3 player etc. Tap on the Bluetooth setting. When your
0000. The chair will give a signal sound to indicate the pairing was successful.
STEP 4:
STEP 5:
Bluetooth Controls
Fast Forward/Next Track
Rewind/Previous Track
Increase Volume
Decrease Volume
Storage Drawer
Pop-up Electrical
Outlets and USB
Charging Ports

Multi Media Wedge
Model: A136-097-041
Assembly Instructions
4 Made in China
Light
Light Button
Press the Light Button located under the center of the back rail (Under the Bluetooth Controls) to turn the
lights ON.
Press the Light Button again to shut the lights o.