Pule PHTCM28 User manual

Water Resistant Infrared Night Vision Game Camera
PHTCM28
www.pyleaudio.com
Instruction Manual

Ⅰ.Your camera features 8MP images, 30 FPS videos, selectable interval, 30 IR
LED’s (Note#1) with 50 foot maximum illumination, up to 32GB SD card capacity,
adjustable PIR (Note#2) sensitivity for ambient temperature, photos are stamped
with date, time, moon phase, and temperature.
1. Front Housing Image
2. Open View
1R LED
Illuminator
Light Sensor
Camera Lens
Indicator Light
PIR
Battery
Container
Display Screen
Battery
Mesh-belt
Switch and Button

3. Switch and Button Control Panel
4. TV & USB Interface
TV Port
USB Port

Ⅱ. Battery Installation
1. Ensure power switch is in the off position.
2. Install 4AA batteries according to polarity indicated in the battery tray.
★Recommended Alkaline battery
★nickel-hydrogen battery rechargeable never to be used (low voltage of nickel-
hydrogen battery would render the camera non-working )
★Incorrect voltage or polarity (+/-) will get the battery hot and or damage unit.
Ⅲ. SD Card Installation
1. Make sure SD Card is not write-locked before inserting.
2. Insert SD memory card into the SD Card Slot completely and in the correct
direction as shown on below picture at the side of the housing, until “click”.

Ⅳ. Setup your Camera
1. After installing the batteries and SD card correctly, turn the power switch to the
on position.
Operation Screen Display
Turn on the switch FREE MEM
XXX MB
Press “DOWN” skip or wait for 5s IMG00000
MOV00000
Press “DOWN” come to set menu
or wait for 5s, come to shoot resting
condition automatically
SET DATE
Or nothing
2. Menu Installation
★when time-lapse snap, the switch status is different; the parameter setting is
not the same
Setup OFF ON Data Selectable
Date SET DATE 2012～2030
Time SET TIME 24H
Mode CAP MODE 1P/3P/Movie
◆1P/3P：8M/5M，Default=5M
◆Movie：5s~15s，Default=10s
Delay DELAY ╳5s-60min，Default=1min
Format FORMAT SD CARD FORMAT SD CARD Y/N
★during menu-setting, after 1 min if you do nothing, the camera would come
into shoot resting condition automatically

Ⅴ. Specification and Parameter
Model PHTCM28（non time-lapse function）
Image Sensor ◆CMOS
Image Format
◆5.0 MP / 8.0 MP（interpolation）
◆1 to 3pcs one time
◆color daytime /black-white nighttime
Video Format
◆VGA(640×480)AVI
◆30fps
◆5s~15s，Default=10s
Delay Time
◆
5s-60min，Default=1min
Memory ◆SD card
◆max up to 32GB
Trigger Mode
◆
IR
Distance
◆
50 feet
Internal Power
◆
4 AA alkaline dry batteries
Extra Power
◆
DC 6v
Ⅵ. Extra Interface
1. USB interface（Mass Storage）
◆On menu setting, insert the USB cable and connect to PC , “USB IN STORAGE”
will be showed on LCD screen, then you could upload or download images from
the SD card inserted in the camera.

2. TV Interface
◆On menu setting, insert the TV cable and connect to TV, “TV OUT PREVIEW”
showed on LCD, then the pictures from camera will appear on TV.
◆press “OK” to change to Playback mode, LCD showed “TV OUT PLAYBACK”, you
can press “UP/LEFT” or “DOWN/RGHT” to view the pictures.
★Press “OK” to playback and view videos.
Notes:
Note#1: The IR LED light is invisible
Note#2: PIR – Passive Infrared Radiation