Pulse Shower Spas Resort 3008-BN User manual

Resort Combo Shower System
Model #3008-BN, 3008-CH, 3008-MB, 3008-ORB
Model #3008-BN-1.8GPM, 3008-CH-1.8GPM, 3008-MB-1.8GPM, 3008-ORB-1.8GPM
PW-93008-8225BRN, PW-93008-8225CP, PW-93008-8225BM, PW-93008-8225BRZ
PW-93008-8218BRN, PW-93008-8218CP, PW-93008-8218BM, PW-93008-8218BRZ
Owner's Manual

2
Resort Combo Shower System
Please Read The Following Instructions
COMPLETELY Before Beginning!
Our goal is to ensure your installation goes smoothly and safely. Please read these
instructions carefully and follow recommendations for plumbing and mounting. After
reading instructions, if you determine you do not have the necessary skills and/or tools,
we recommend that a licensed plumbing contractor complete the installation.
If you encounter any problems during installation
PLEASE VISIT CUSTOMER SUPPORT AT
WWW.PULSESHOWERSPAS.COM
Before returning your system to the store
You Will Need The Following Tools
Soft pencil or felt pen to mark tile
Allen wrench
Safety glasses
Phillips screwdriver
Reciprocating saw w/metal cutting blade (Sawzall®)
Channel locks or adjustable wrench
Drill (Preferably cordless)
Plumber's Tape

Parts Legend
1. Showerhead
2. Washer.......................(3)
3. Shower Arm
4. Escutcheon
5. Cap
6. Mounting Screws.....(6)
7. Gasket........................(6)
8. Wall Anchors...........(4)
9. Handshower
10. Slide Bar
11. Wall Connector
12. Nipple
13. Handshower Holder
14. Hose
15. Valve
16. Diverter Valve Sleeve
17. Valve Cartridge Sleeve
18. Valve Cartridge Nut
19. Valve Trim
20. Diverter Handle
21. Valve Handle
3

4
Installation Instructions
removable
removable
1
2a
2b
3
If welding, plumbers tape is not necessary.
Conrm the installation position and remove the
plaster guard.
If there is a bath tub, remove the tub spout cap.
Apply plumbers tape on all joint threads needed.
Drill screws to stud to x main valve body.
If no tub, keep the tub spout cap. Apply plumbers tape
on all joint threads needed.
removable
without tub installation
with tub installation
without tub installation
with tub installation
without tub installation
with tub installation
4
Connect the supply line to the valve, turn main water
valve on and conrm there is no water leakage.
wall
trim plate
finished wall
finished wall
stud
Step 1
Step 3
Step 2
5
Install diverter trim sleeve and valve trim sleeve.
Screw in trim nut.

5
Installation Instructions
wall
trim plate
finished wall
finished wall
stud
Step 1
Step 3
Step 2
Hot Cold
Showerhead
water ON
Hand Shower
Step 3
Step 4
Step 2
Step 1
Step 2
Step 1
Step 2
Step 1
Step 2
Step 3
Step 4
Step 1
Step 3
Step 4
Step 2
Step 1
Step 2
Step 1
Step 2
Step 1
6
8
9
11
10
After nished wall, install valve trim plate.
We recommend caulking around the trim.
Screw in nipple.
[Step 1] Choose desired position and drill wall anchors
into nished wall. Drill in gasket, and mounting screws
onto slide bar.
[Step 2] Place cap covers on slide bar.
[Step 1] Place plumbers tape on nipple threads.
[Step 2] Screw in shower arm into plumbing and thread.
[Step 3] Slide escutcheon for smooth nish.
[Step 4] Insert washer into showerhead and thread
onto shower arm.
[Step 1] Place plumbers tape on nipple threads.
[Step 2] Screw in wall connector.
[Step 2] Insert rubber washer into hex end of hose and
connect to wall connector.
[Step 3] Insert rubber washer into tapered end of hose
and connect to handshower. Place in holder.
wall trim plate
finished wall
finished wall
stud
Step 1
Step 3
Step 2
7
[Step 1] Insert allen wrench into diverter threaded pin
and thread to diverter body. Place on top of diverter
cartridge, and thread with allen wrench until secure.
[Step 2] Thread diverter handle onto diverter
threaded pin.
[Step 3] Install valve handle and secure with set screw
using allen wrench. Place cover over set screw.