PULSE+ Speakon NL4-SPLIT User manual

1
Speakon
®
Splitter Box
Model: NL4-SPLIT
www.pulse-audio.co.uk

2
Safety Information
The lightning bolt within a
triangle is intended to alert the
user to the presence of
dangerous voltage levels within
the product’s enclosure.
This voltage may be of sufficient
magnitude to constitute an
electric shock risk.
To reduce the risk of electric shock, do
not remove cover of this device. There
are no user serviceable parts inside.
Refer servicing only to qualified service
personnel.
The exclamation point within a triangle is intended to alert the
user to important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Safety Precautions
• Read and retain these instructions
• Follow all instructions and heed warnings
• Do not use this device near water
• If the surface becomes dirty, clean only with dry cloth, do not use solvents or thinners
• Install in accordance with the manufacturer’s instructions
• Do not install near heat sources such as radiators, heat registers, stoves, or other devices that produce heat
• Only use accessories specified by the manufacturer
• Refer all servicing to qualified personnel
• This device must not be exposed to water in any way. No object filled with liquids should be placed on apparatus
Operation:
The PULSE NL4-SPLIT is designed to allow the use of ultiple speaker cabinets on a single a plifier
channel. The splitter is wired internally with all four pins connected in parallel (1+ to 1+, 1- to 1-, 2+ to
2+, 2- to 2-). The adaptor box utilises genuine Neutrik® Speakon® NL4 sockets to ensure reliability when
in service. Please use speaker leads fitted Neutrik® Speakon® connectors with this adaptor.
Care should be taken to observe the ini u i pedance at which the a plifier can operate – wiring two
8Ω speakers in parallel will present a 4Ω load to the a plifier, or two 4Ω speakers will present a 2Ω load
to the a plifier. Incorrectly atched loads can da age power a plifiers and in turn da age speakers.
CAUTION! Never atte pt to connect two power a plifiers using this box – this will lead to a short
circuit and cause equip ent failure. The NL4-SPLIT is only designed for connecting ultiple speakers to
one power a plifier.

3
1) Inp ts
Input fro power a plifier via a Neutrik NL4 socket wired will all four pins connected.
2) O tp ts
Outputs to speakers via Neutrik NL4 wired sockets will all four pins connected.
Compliance
When this product reaches the end of its life, do not dispose with household waste. See www.recycle- ore.co.uk for details of how to
dispose of PULSE products in an environ entally sound fashion, or contact PULSE directly via www.pulse-audio.co.uk
Warranty
Pulse products are warranted, by Pulse, against anufacturer defects for a period of one year fro the original date of purchase.
This warranty is li ited to anufacturer defects, in either aterials or work anship. PULSE, or any other worldwide divisions of
Pre ier Farnell PLC, is not responsible for any consequential or inconsequential da age to any other co ponent, structure or the
cost of installation or re oval of said ite s. Defective ite s should be returned to the retailer fro who they were originally
purchased.
This warranty will not cover da age due to i proper use such as (and not li ited to) da aged cones, ounting fra es, voice coils
or ite s da aged by weather including exposure to oisture.
For questions or specific infor ation regarding warranty replace ent or repair, contact:
PULSE
www.p lse-a dio.co. k
1
2