purchase green PERFECT GROOM 40L User manual

Instruction manual
EN
WARNING: To reduce the risk of injury, the user must read and understand the owner’s manual
before using this product.
ARTIFICIAL
GRASS
CLEANER
SAA211029
40L

English
2/16
INDEX
1. Introduction 1
2. Normative and security measures 1
3. Warning icons 5
4. Machine symbols 6
5. Machine description 6
6. Start up instructions 8
7. Maintenance and service 10
8. Transport 10
9. Storage 10
10. Recycling and machine disposal 10
11. Troubleshooting 11
12. Roll&Comb Operating Tips 11
12. Warranty 11
1. INTRODUCTION
Thank you for choosing a Garland machine. We
are sure that you will appreciate the quality and
functions of this machine that will facilitate your
daily work for a long time. Remember that this
machine has a wide of network of after sales
services to which you can take your machine for
any maintenance necessary on your machine, in
case of any troubleshooting and for purchasing
spare parts and accessories.
Attention! Read all the warning
signs and all the instructions. The
non observance of the warning and
instructions detailed from here on can result in a
re being caused and/or a serious injury. Before
using the machine, read carefully the information
in this manual on a secure and correct start up.
Use this machine only to rake articial
grass. Do not use this machine for other uses
not contemplated. The use of this machine for
other non contemplated uses could result in
dangerous working incidences.
Keep all the warning signs and the manual
in a safe place for future reference. If you sell or
otherwise dispose of the machine, please pass
on the instruction manual as it forms part of the
machine.
The expression ¨machine¨ on the warning
signs makes reference to this electric machine
connected. The expression ¨switch in the open
position¨ means that the switch is disconnected
and ¨switch in the closed position¨ means that
the switch is connected.
Remember that the end user is responsible for
accidents and damages caused to himself, to
third parties and to things.
The manufacturer will not be in any case held
responsible for damages caused through an
inadequate or incorrect usage of this machine.
2. NORMATIVE AND SECURITY
MEASURES
To avoid an incorrect manipulation of the
machine, read all the instructions included in
this manual before using it for the rst time. All
information included in this manual is relevant
for your personal security as well as for other
people, animals and things found in your
surroundings. If you have any doubts about the
information included in this manual, please ask
a professional or go back to where you bought
the machine to solve your doubts.
The following list of dangers and precautions
include the most probable causes whilst using
the machine. If you nd yourself in a situation
not explained in this manual, use your common
sense and use the machine in the most secure
way and if you see any danger, do not use the
machine.
2.1. USERS
This machine has been designed to be operated
by people over 18 and whom have read and
understood the instruction manual.
The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety.
Children should be surpervised to ensure that
they do not play with the appliance.

English English
3/16
Attention! Do not allow underage people to
use the machine.
Attention! Do not allow people who do not
understand the instruction manual to use the
machine.
Before using the machine familiarize yourself
with the machine making sure you know
perfectly well where all the controls can be
found as well as all security devices and how all
these should be used. If you are not an expert
user we recommend you start with some simple
jobs and if possible, under the supervision of an
expert user.
Attention! Only lend this machine to people
who are familiarized with this type of machine
and know how to use it. Always lend the
instruction manual with the machine so that
the new user reads it and understand it prior to
carrying out any work.
This machine is dangerous in untrained hands.
2.2. PERSONAL SECURITY
Be alert and vigilant and use common sense
when using the machine.
Do not use the machine when you are tired
or under the inuence of drugs, alcohol or
medicines. One moments distraction can cause
serious personal injury.
Never use the machine without the safety
features.
Avoid the accidental start up of the machine.
Verify that the switch is in the ¨open¨ position
before connecting to the mains. Never transport
the machine with your nger on the switch or
with the switch in the ¨closed¨ position as it can
be dangerous to your security and can cause
accidents.
Remove all tools from the working area
before starting the machine. Any tools
left in the working area can be touched
by any moving part of the machine and
be hurled causing personal damages.
Do not overreach. Maintain both feet rmly on
the ground at all times. Do not use this machine
on slopes surpassing 15o. Comber on small
hillocks can be dangerous. Be vigilant when
walking on steep inclines and with wet grass.
Be particularly careful when changing working
direction on an incline.
Be careful when walking on slopes or wet grass.
Take special caution when changing direction
on slopes.
Do not comber backwards or pulling the
machine. Be alert when pulling the machine
backwards.
Dress adequately. Do not use the machine
barefoot or wearing sandals. Always use
resistant shoes and long trousers.
Do not place your hands or feet under the
lawnmower. Maintain all parts of the body
well away from the blade when the machine is
running. Before starting the lawnmower, ensure
that the blade has not come into contact with
any object.
Hold the comber with both hands from the
handle and place your body behind the comber.
Maintain all body parts well clear of any moving
parts when the machine is in use. Before
starting the machine, check that the moving
element is not in contact with any object. One
moment of carelessness and your clothing or
any body part could get caught up in the moving
parts.
If the machine vibrates abnormally, stop the
engine and inspect the machine looking for the
possible cause and repair it. If you do not nd
the motive, take the machine to your nearest
after sales dealer.
Make sure the machine has stopped completely
before carrying out any maintenance or cleaning
work on the machine and the working area.
Store all electric machines well away from
children.
2.2.1. VIBRATIONS
The prolonged use of the machine, exposes
the client to vibrations that in extreme cases and
through many hours of use of the machine could
cause the ¨white nger syndrome¨ also known as
Raynaud phenomenon. This causes a reduction
in the tact of the ngers and their capacity
to regulate temperature generating a lack of
sensibility. This sickness could in extreme cases
cause problems with the nerve endings.

English
4/16
The exposure to the vibrations is the cause of
the white nger syndrome. To minimize this
eect as much as possible, follow the following
recommendations:
• Always use gloves.
• Always have your hands warm.
• Take frequent breaks.
• Always hold the machine tightly by the
handles.
If you detect any of the symptoms of the white
nger syndrome, consult immediately with your
doctor.
2.3. WORKING AREA SECURITY
Maintain the working area clean and work with
good light. Untidy working areas and dark
conditions can cause accidents.
Inspect the working area and remove all stones,
wood, cables and strange objects that could be
touched and propelled by the moving parts of
the machine.
Do not use the machine in explosive
atmospheres or in the presence of inammable
liquids, gases and powders. Electric machines
can release sparks that could ignite the
inammable liquids, gases and powders.
Maintain children, other people and animals well
clear of the machine whilst working. Distractions
can cause the loss of control. Be vigilant and
stop any children, other people and animals
coming into the working area.
Do not use this machine at night, with fog or
with reduced visibility that does not allow you to
see the working area.
2.4. ELECTRICAL SECURITY
The electrical switch of this machine must
coincide with the mains switch. Do not modify
the switch in any way. If no parts have been
modied and they t perfectly, there will be no
electric shock accidents.
Avoid body contact with earthed surfaces such
as tubes, radiators, electric kitchens and
refrigerators. There is a higher electric shock
possibility if your body is earthed.
Don’t expose this machine to rain, wet
or humid conditions. If water enters the
machine there will be a higher risk of electric
shock.
Do not overstretch the cable. Do not use the
cable to transport the machine, lift the machine
and to unplug the machine. Maintain the cable
far away from heat sources, oil, sharp edges or
other moving parts. Damaged or tangled cables
increase the risk of electric shock.
Never use this machine if the cable or the plug
are damaged. Before connecting the machine
check that the cable and the plug are not
damaged. If you discover that either of these
elements are damaged, take your machine to
your nearest after sales dealer. Should the cable
be damaged, unplug the machine immediately.
Damaged or tangled cables increase the risk of
electric shock.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid a
hazard.
We recommend that this machine should be
connected to residual dierential whose current
is lower or equal to 30mA.
Never use a connecting base that is damaged or
that does not comply with current standards or
with the requisites established for this machine
in this manual.
When using a cable extension, make sure that
its minimum section is 1.5mm2and no longer
than 15 meters, always unrolled and adequate
for outdoor use. The use of the cable extension
adequate for outdoor use, reduces the risk of
electric shock.
Place the cable extension in such a way that
it will not get caught in branches or other
obstacles and in such a way that it is not in the
working area. The cable and any extensions
must always be behind the machine and the end
user.
Always hold the cable extension in the hook
provided on the machine.
Connect this machine to alternate current
240V/50Hz.
Do not touch this machine with wet hands. Risk
of electric shock. Maintain the cable well clear

English English
5/16
of the moving element at all times.
Do not use this machine if the ¨open¨ and
¨closed¨ switch does not work. Any electric
machine that cannot be controlled by the
electric switch is dangerous and must be
repaired.
Always disconnect the machine before carrying
out any work on the machine. Only manipulate
the machine when disconnected.
2.5. USAGE AND CARE OF THIS MACHINE
Use this machine only to rake articial grass.
Do not use this machine for other uses. The
use of this machine for other uses for which it
has not been designed could cause dangerous
situations.
Use this machine, accessories and all its parts
according to the instruction manual and taking
into account working conditions and working
area. The use of this machine for jobs dierent
to those specied in the instruction manual can
cause dangerous situations.
The manufacturer will not be in any case held
responsible for damages caused through an
inadequate or incorrect usage of this machine.
Do not overload the machine. Use the machine
for the work it has been designed for. The
correct machine usage will allow you to work
better and in a more secure way.
Do not run with the comber. Walk at the correct
speed that will allow the machine to do its job.
Do not use this machine if the ¨open¨ and
¨closed¨ switch does not work. Any electric
machine that cannot be controlled by the electric
switch is dangerous and must be repaired.
Look after the machine. Check that all moving
parts are well aligned and that they are not
blocked, that there are no broken pieces or
other conditions that could aect the proper
functioning of the machine. If this machine
is damaged, always repair it before using it
again. Most accidents occur because of poor
maintenance.
Maintain the moving elements clean. The
moving elements if clean will comber better, do
a better job, have less chance of getting tangled
and easier to control.
Turn o and disconnect the machine from the
mains before carrying out any maintenance work
such as adjustments, cleaning, transportation
(even if you are just moving the machine from
one working area to another however close
by this might be), elevating the machine,
maintenance or storage of the machine. These
simple security measures reduce the risk of
accidental start up.
Do not incline the machine with the engine
running.
2.6. MAINTENANCE
Take your machine for periodic revision to a
qualied after sales dealer and only use original
spare parts and accessories. This will guarantee
that the security measures of this electric
machine can always be complied with.
3. WARNING ICONS
The warning icons on the labels that are
attached to this machine and/or in the manual
give necessary information which is necessary
for a correct usage of this machine.
Attention, danger!.
Attention! Danger of material ejection.
Be careful with materials that could be
ejected.
Read carefully this manual before start
up.
People who are not adequately
protected should stay well clear and
beyond the security distance.
Do not use this machine in humid
conditions or if it is raining.
Always use eye goggles or protecting
mask and ear protectors.

English
6/16
4. MACHINE SYMBOLS
To guarantee a correct use and maintenance of
this machine, you will nd the following symbols
on the machine.
5. MACHINE DESCRIPTION
5.1. USAGE CONDITIONS
This machine is for domestic use and to
rake articial grass. Do not use this machine to
work in public areas or to carry out professional
agricultural jobs.
Use this machine outdoors, in dry conditions
and in temperatures between 5ºC and 45ºC.
Remember that the end user is responsible
for the dangers and accidents caused to other
people and objects. The manufacturer will not
be in any case held responsible for damages
caused through an inadequate or incorrect
usage of this machine.
Press the security button and
without letting go of it, pull the
switch bar.
1
2
Danger of electric shock.
Maintain the cable well clear of the
moving elements.
Use cable elongators with a
minimum section 1.5mm2, and
no longer than 15 meters and
always ensure all the cable is
unwound.
Attention! Before carrying out any
maintenance work or repair, unplug the
machine from the mains.
Risk of injuries! Remove all tooling from
the working area prior to its use.
Degree of protection.
Protection Class II.
Guaranteed level of sound power Lwa,
Db(A).
XX
Caution! Unplug the machine
immediately if the cable or the switch
are damaged.
Dispose of your machine in an
ecological way. Do not dispose of the
machine together with your domestic
rubbish.
AWG 16/ 15mm2x 15m

English English
7/16
5.3. TECHNICAL CHARACTERISTICS
The technical characteristics can be changed without prior warning.
5.2. DETAILED DESCRIPTION OF THE PRODUCT
1. ON/OFF switch handle
2. Safety switch
3. Catcher
4. Cable hook
5. Handle
6. Handle
7. Handle
8. Height adjustment lever
9. Catcher cover
10. Comber
The diagrams and pictograms herewith enclosed
in this manual are a guide but not necessarily an
exact copy of the actual machine.
2
6
7
1
3
5
9
8
4
10
Description Grass Comber
Brand Garland
Model 502E-AU
Engine 230-240V~50Hz
Power (W) 1,600
Class protection II
International Protection Code IPX4
Work diameter (mm) 400
Rake diameter (mm) 135
Maximum depth (mm) 10
Minimum depth (mm) -10
Catcher (l) 40
Average level of sound power LwA, dB(A) 83.5
Average level of sound pressure LpA,m dB(A) 96
Vibration level of the handle (m/s2) 5.116
Dry weight (kg) 15.6

English
8/16
6. START UP INSTRUCTIONS
6.1. LIST OF MATERIALS
This machine includes the following elements
that you will nd inside the box:
• Grass Comber
• Catcher
• Top handle
• Intermediate handle
• Lower handle
• Lower handle screws
• Handle screw and knob
• Hook for cable
• Instruction manual
Remove carefully all the elements from the box
and make sure that all listed parts are included.
Due to the quality controls done at the factory
it is highly improbable that your machine has
any faulty part or that any elements are missing.
If you nd any damaged part or there are any
elements missing, do not use the machine until
the problem has been solved or you have been
given the missing parts. Usage of the machine
with defective or missing parts is dangerous and
could result in personal injuries.
6.2. MOUNTING THE HANDLE
The handle comes unmounted from the
manufacturing plant. To mount the handle:
1) Place the comber on a at surface.
2) Insert the lower handles on the grass comber
as shown in the gure and hold in place with the
screws.
3) Place the intermediate
handle on the lower handle
and hold in place with the
screws and knob provided.
4) Place the top handle and
hold the screws and knobs
provided.
6.3 INSTALLATION OF THE CATCHER
Place the catcher on the comber by hooking
the catcher on the hooks on the rear part of
the machine. To do this, hold the catcher by
the top handle provided with your right hand,
lift the security trap with your left hand up to its
maximum point and hook the catcher on the
machine.
6.4. HOLDING THE CABLE EXTENSION
Only use cable
extensions that are
certied for outdoor
use. The cable section
must be at least
1.5mm, the cable will
have a maximum length
of 25m and it must be
fully unrolled before
starting to work.
Fix the cable extension to the xing hook
provided as seen in the gure.
6.5. CONNECTING TO THE MAINS
It is mandatory that this machine is connected
to a switch protected by a dierential whose
current is 30mA maximum. The tension must
be 240V, the frequency 50Hz and it must have a
2
3
1

English English
9/16
circuit breaker of 16A.
Never use a damaged cable or a damaged
electric mains, or that does not comply with
current normative or those required for this
machine. When using a electric extension for the
cable, make sure that it has a minimum section
of 1.5 mm2 and it should not be longer than
15 meters in length and approved for outdoor
use. Both the plug and the base of the electric
extension must be waterproof and should never
be submerged in water. The use of an adequate
electric extension will reduce the risk of electric
shock.
6.6. CHECKING POINTS PRIOR TO USING THE
MACHINE
Check all the machine and make sure that there
are no loose parts (screws, nuts, knobs etc) and
any damages to the machine. Tighten, repair or
replace all necessary equipment prior to using
the machine.
Check the state of the catcher and that it is
properly in place. Do not use the machine if it is
damaged or not properly regulated.
6.7. START UP AND STOPPAGE
Do not place hands or feet
under the comber. Maintain
all body parts well clear from
all moving elements when the
machine is in use.
Start up of the machine:
Press the security button
(1) and without letting go of
it, pull upwards the bottom
switch On/O (2). Once it has started, let go of
the security button.
Stopping the machine:
Let go of the bottom switch On/O.
After stopping the machine, the comber will
not stop immediately. Wait until it has stopped
before carrying out any maintenance work on
the machine or before transporting the machine.
Use this machine only for jobs for which it
has been designed. The use of this machine
for any other jobs is dangerous and can cause
dangers to the users and/or to the machine.
Do not place hands or feet under the comber.
Maintain all body parts well clear from all moving
elements when the machine is in use.
Before starting the comber, check that the
moving elements are not in contact with any
object.
Should you slip or fall, let go of the handle
immediately.
Do not rely solely on the security elements of the
machine, use your common sense.
Do not use this machine if fatigued, sick, if you
have had medicines, drugs or alcohol. Lack
of sleep or fatigue can cause accidents and
damages.
Do not use this machine at night, with fog or
with reduced visibility. You must be able to see
and control the working area.
Never leave the machine unattended.
Do not allow anybody to enter the working area.
The perimeter is no less than 15 meters and
nobody should enter this working area as it is a
danger zone.
Clean the working area and remove any
obstacles that could cause accidents.
Always regulate the machine on a at and stable
surface.
Do not use accessories on the machine except
those recommended by our company. Use of
non recommended accessories could cause
severe damages to the user, to the people close
by and to the machine.
Avoid using the machine when the ground
is humid. Be particularly careful if using the
machine after it has rained as you might slip
more easily.
It is mandatory to switch o the engine when
transporting the machine between working
areas.
7.1. FIXING THE MACHINE AND GUIDANCE
Whilst working, always hold the comber with
both hands. Always be behind the comber and
push the machine forward. Do not run with the
comber, walk at a constant speed that allows
the machine to comber the lawn.
7.2. ADJUSTING THE WORKING HEIGHT
1
2

English
10/16
Attention! Stop the machine and wait for
the comber to stop before adjusting the height
adjustment. The comber need a few moments to
stop completely after stopping the engine.
To regulate the height adjustment, press the
lever outwards and move it or up or down to the
desired spot.
7. MAINTENANCE AND SERVICE
The removal of the security measures, an
inappropriate maintenance, the substitution
of parts by non original spare parts and
accessories could result in severe body harm.
Always carry out maintenance work or servicing
with the machine unplugged from the mains.
Unplug the machine before carrying out any
maintenance work. Read the instruction manual
before carrying out any work.
Carry out periodic checks on the machine
to ensure its correct functioning. For a complete
check up, we recommend you take the machine
to your after sales dealer.
Keep the machine clean, specially the engine air
vents.
8.1. CLEANING
Clean the comber with a damp cloth. Never use
water, petrol or other liquids when cleaning the
machine.
You can use water on the catcher as long as
you separate the catcher from the machine at
a distance from the machine. Dry the catcher
completely before placing again on the machine.
8.2. CONTROL OF THE ELECTRIC CABLE
Inspect the cable for possible damages. If
the cable is not in a good condition, take the
machine to your nearest service agent.
Do not use the machine if the cable is damaged.
8. TRANSPORT
Transport the machine always with the engine
turned o. Before transporting remove switch
from the mains.
The machine can be transported using the
handle. Do not drag the machine with the
comber on the oor.
9. STORAGE
Disconnect the machine from the mains before
storing the machine.
Store electric products such as this machine
well away from children and in a secure manner
so that it does not represent a danger to any
person. The machine should be stored clean
and on a at surface. Store in a place where
the temperature is not below 0C and not above
45C.
10. DISPOSAL AND RECYCLING
OF MACHINE
Destroy or recycle your machine in an ecological
way. We should not throw away the machine
with our domestic rubbish. The machines plastic
and metal parts can be recycled.
Materials used to pack the machine can also be
recycled. Do not throw the boxes away with your
domestic disposals. Dispose of the box in an
appropriate recyclable fashion.
Position 1 -10 mm
Position 2 -5 mm
Position 3 0 mm
Position 4 5 mm
Position 5 10 mm

English English
11/16
11. TROUBLESHOOTING
Depending on the symptoms detected you can probably nd the cause of the problem and nd a
solution.
In any other case, take the machine to your nearest after sales service.
PROBLEM CAUSE ACTION
Engine does not work
Machine not connected to mains Connect to mains
Cable damaged Take to service agent
Damaged switch Take to service agent
Worn out brushes Take to service agent
Overload protection activated Allow the machine to cool 15
minutes
Abnormal noises
Blocked comber Unplug the machine, remove
elements blocking the blades
Transmission with little grease Take to service agent
Screws and nuts of blades loose Check and tighten
Abnormal vibrations
Comber damaged Take to service agent
Internal engine or transmission
problem Take to service agent
12. ROLL&COMB OPERATING
TIPS
For best results:
1) Use your Roll&Comb regularly to keep the
grass free of debris and the grass pile upright.
2) Apply maintenance more often if the grass
experiences heavy foot trac.
3) For optimum results use Roll&Comb on dry
grass.
4) Set comb height (302, 502 & 602 Series)
commensurate with grass pile height.
5) Do not set comb height too low unless
in-ll re-generation is required.
6) Brush with grass pile direction.
7) Do not overload catcher.
8) Always clean your Roll&Comb after use.
13. WARRANTY
Validity:
XX months from proven date of purchase.
(Exceptions* vary)
Guarantor:
YYYYYYYYY provides this limited
manufacturer’s warranty to cover any
product purchased in Unites States of
Amreica when the Product is veried by
YYYYYYYYY as having a defect in its original
material or manufacturer’s workmanship.
Guarantee:
Purchaser is entitled to a refund or
replacement for major failures with Products.
If a fault with the goods does not amount to
a major failure, purchaser is entitled to have
the fault rectied within a reasonable time
per the entitlements below. Determination by

English
12/16
YYYYYYY.
Faults:
This warranty covers the limited replacement
of parts, the repair labour used or other
prorata compensation for the remainder
of the warranty period. Determination by
YYYYYYYY.
Warranty Claims:
Proof of purchase by means of a valid receipt
is required with any warranty claim.
Limitations:
This manufacturer’s warranty only covers
products that have been purchased in
Unites Sttes od America through YYYYYY
(or its appointee) and that are used solely
for Do-It-Yourself intentions, as the range
is not designed for commercial operation.
This product warranty does not apply to any
equivalent, separately imported unit.
Exclusions:
This warranty will not apply if;
1) The Product is purchased outside of
Unites States of America.
2) Any original manufacturer’s serial
number or labelling has been altered or
removed.
3) Any fault, failure or damage is a result
of repairs to the Product that have been
carried out or attempted by a service
provider other than YYYYYYY (or their
appointee).
4) The claim arises from normal wear and
tear or wear and tear from overuse. Key
components including but not limited
to combs, brushes, collection bags,
bearings, O-Rings, air lters and engines
must be regularly inspected so that the
wear and tear on said parts does not
cause the unit to fail.
5) The use of incorrect fuel (602QG) or
failure to follow engine maintenance
guidelines.
6) Use or maintenance of the device is not
in accordance with the guidelines detailed
in the manufacturer’s instruction manual
supplied in the box.
7) The claim results from the Product
being dropped or crushed, exposed to
extreme heat or cold, used after partial
failure or operated in any other abnormal
manner.
8) Damage to the Product is caused by
sand, water, corrosion, insects or rodents,
power outages or surges, inadequate
electrical current or improper voltage.
9) The Product has been operated
improperly or used with inappropriate
external accessories including power
cords and / or extension cables.
10) The Product has been modied or
if any damage or fault has been caused
by an event or circumstance beyond
the control of the consumer, YYYYYY or
Garland.
11) Failure or fault result from commercial
or trade use.
Final determination in relation to all exclusions
shall be at the sole discretion of YYYYYYY.
Presentation:
Purchaser is responsible for the care and
cleaning of the Product at all times.
Products that are not clean or have been
exposed to hazardous substances will not be
inspected, serviced or repaired and will be
returned to the Customer. OHS restrictions
will be applied. YYYYYYYY reserves the right
to refuse to inspect, repair or service any
products.
Implied warranties:
To the full extent permitted by law, all
warranties, conditions and other terms
expressed or implied by statute or common
law are excluded. Nothing contained
herein excludes or restricts any consumer
guarantee, warranty, right or remedy under
any statute which cannot be excluded,
provided that, to the extent that the statute
permits YYYYYYY is entitled to limit its
liability as set out below for a breach of a
guarantee, condition or a warranty implied by
that statute.

English English
13/16
1) Products covered under this
warranty will be inspected / repaired by
YYYYYYY at their registered premises
or at the premises of any authorised
service centre without cost to the
purchaser for parts and labour.
2) Purchaser is responsible for all freight
and insurance costs if the Product
needs be returned to YYYYYYY or
any authorised service centre for said
inspection / repair.
3) Products repaired under this warranty
may be replaced by refurbished units
of the same type rather than being
repaired. Refurbished parts may also be
used to repair the Products.
Exceptions*:
The following accessories and
consumables have a 3-month warranty
period:
1) All genuine accessories and
attachments
2) Individual combs and brushes
3) O-rings, seals, bearings, lters and
spark plugs
4) Collection bags and related ttings
5) Handle coverings
Claims:
To claim on this warranty purchaser must
present the dated sales receipt along with
the product to YYYYYYY. For service or
warranty enquiries consumers should
contact YYYYYYY on (phone number).

English
14/16
THIS WARRANTY SHOULD BE RETAINED BY THE CUSTOMER
For ease of reference and to assist with proof of purchase please complete details
below and keep this form together with your purchase receipt:
Purchased from:
Address:
Purchase date: Model number: Serial number:
PRESENT THIS FORM WITH PROOF OF PURCHASE IF SERVICE IS REQUIRED

English English
15/16

Ref.:ROLL&COMB502EAUJPV12
DATE OF PUBLICATION: 1/02/2022
DATE OF REVISION: 1/02/2022
TRANSLATIONOFTHEORIGINALINSTRUCTIONS