Pure Enrichment PEHTWGHT-G-RT User manual

USER MANUALUSER MANUAL
MODEL: PEHTWGHT-G-RTMODEL: PEHTWGHT-G-RT

1
IMPORTANT SAFETY
INSTRUCTIONS
DO NOT DESTROY
DANGER: TO REDUCE THE RISK OF BURNS,
ELECTRIC SHOCK, FIRE, AND PERSONAL INJURY,
THIS PRODUCT MUST BE USED IN ACCORDANCE
WITH THE FOLLOWING INSTRUCTIONS:
1. BE SURE TO READ CAREFULLY THE ACCOMPANYING
INSTRUCTION BOOKLET BEFORE USING THIS BEDDING.
2. DO NOT USE THIS BEDDING WITH AN INFANT, AN
IMMOBILE PERSON, OR ANYONE INSENSITIVE TO HEAT,
SUCH AS A PERSON WITH POOR BLOOD CIRCULATION.
3. DO NOT TUCK IN THE WIRED AREA OF THIS BEDDING.
4. DO NOT ROUTE ELECTRICAL CORDS BETWEEN THE
MATTRESS AND BOX SPRING. DO NOT ALLOW THE
CORDS TO BE PINCHED.
5. KEEP THE CONTROL AWAY FROM DRAFTY AREAS THAT
MAY BECOME DAMP OR WET SUCH AS AN OPEN WINDOW.
6. DO NOT USE PINS – THEY MAY DAMAGE THE ELECTRIC
WIRING.
7. BE SURE THAT THIS BEDDING IS USED ON AN
ALTERNATING-CURRENT SUPPLY CIRCUIT OF THE
PROPER VOLTAGE.
8. TURN OFF OR UNPLUG WHEN NOT IN USE.
3
9. EXCESSIVE HEATING MAY RESULT FROM FOLDING
BEDDING, OTHER THAN A MATTRESS, WHEN IN ACTUAL
USE.
10. IF IMPROPER OPERATION OF THIS BEDDING IS OBSERVED,
DISCONTINUE ITS USE IMMEDIATELY AND CONSULT
THE MANUFACTURER OR THE DEALER REGARDING ITS
REPAIR.DO NOT USE WITH ROCKING CHAIRS, RECLINERS,
CHAIRS WITH CASTERS OR WHEELS, OR OTHER
FURNITURE SUBJECT TO MOVEMENT.
11. DO NOT TUCK THE BLANKET OR SUPPLY CORD IN A SOFA
OR OTHER FURNITURE. ALL PORTIONS OF THE BLANKET
OR CONTROLLER SHOULD BE VISIBLE AT ALL TIMES.
12. WRAPPING OF CORD AROUND THE CONTROLLER MAY
DAMAGE THE CORD. LOOP LOOSELY WHEN STORING.
13. NOT FOR HOTEL, MOTEL OR OTHER INSTITUTIONAL USE.
14. THIS BLANKET HAS A POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER) AS A SAFETY FEATURE. THIS
PLUG WILL FIT INTO A POLARIZED OUTLET ONLY ONE
WAY. IF THE PLUG DOES NOT FIT FULLY INTO THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT
A QUALIFIED ELECTRICIAN. DO NOT ATTEMPT TO DEFEAT
THIS SAFETY FEATURE.
15. DO NOT DRY CLEAN THIS BEDDING. CLEANING
SOLVENTS MAY HAVE A DETERIORATING EFFECT ON THE
INSULATION OF THE HEATING ELEMENT.
16. SAVE THESE INSTRUCTIONS
2

2 3
USING WEIGHTEDWARMTHTM WITH HEAT (CONT'D)
NOTE: If the blanket does not turn on when you press the
power button, make sure the Control Connector is securely
plugged into the Blanket Connector.
To turn off, scroll through all the heat settings until the heat
indicator light turns off.
AUTO-OFF FEATURE
To conserve energy and prevent skin burns caused by excessive
use, this blanket includes an auto-off feature. It will turn off
automatically after two hours of continuous use. The red auto-off
light will blink when this feature is activated.
NOTE: After a power outage, the timer on the auto-off
feature will automatically reset.
USING WEIGHTEDWARMTHTM WITHOUT HEAT
WeightedWarmthTM can be used solely as a weighted throw if
you do not desire the heating funciton. Simply disconnect the
controller for easy, untethered use.
CLEANING INSTRUCTIONS
To prolong the life of your WeightedWarmthTM throw blanket,
occasional spot cleaning may be necessary. Follow these
instructions to preserve the softness of the fabric and protect the
electrical components:
1. Prepare a cleaning solution with 1 cup lukewarm water
and 1/4 tsp mild detergent.
2. Dip a clean cloth into the cleaning solution and use
circular and diagonal motions to remove the stain.
3. Rinse the cloth with water to remove any detergent and
use the rinsed cloth to remove any remaining cleaner
from the blanket.
4. Allow the treated area to air dry before use.
5. DO NOT machine wash.
6. DO NOT allow electrical components to get wet.
INTRODUCTION
Thank you for purchasing the WeightedWarmth™ Weighted
Throw Blanket with Heat from Pure Enrichment. Our rst-of-its
kind throw cuddles you back with calming weighted pressure and
therapeutic heat that work together to support better relaxation.
USING WEIGHTEDWARMTHTM WITH HEAT
Attach the Blanket Connector to the Control Connector. Push
both parts together securely to ensure a tight t.
NOTE: The Control Connector must be connected to the Blanket
Connector before plugging the unit into an electrical outlet.
After connecting the Blanket Connector to the Control Connector,
plug the unit into a 120V AC electrical outlet.
To turn on, press the power button. Select the desired heat
setting by continuing to press the power button until the heat
indicator light is the color of your desired heat setting:
Green=Warm Orange=Medium
Yellow=Low Red=High
To turn off, press the power button one more time.
NOTE: The “high” indicator light will blink red when an error
occurs. If this happens, unplug the blanket from the electrical
outlet. Check the physical condition of the cord, the wall outlet,
and the connection between the Control Connector and the
Blanket Connector. If blinking persists after you conrm a proper
connection, email [email protected].
4 5
Control
Connector
Connector
Blanket

4 5
PRODUCT SPECIFICATIONS
Blanket Size: 50” x60”
Power Supply: AC: 120V, 50Hz, 100W
Blanket Material: Micromink (Top); Sherpa (Bottom)
Auto Shut-Off Timer: 120 minutes
4 Heat Settings: Warm–temperature range (~90oF)
Low–temperature range (~95oF)
Medium–temperature range (~100oF)
High–temperature range (~105oF)
WARRANTY
WeightedWarmthTM comes with an industry-leading 5 Year
Warranty that begins on the date of purchase.
The warranty applies to the weighted throw blanket and
necessary parts and labor relating thereto. The warranty does
not apply to damage resulting from failure to follow the operating
instructions, accidents, abuse, alterations, or disassembly by
unauthorized individuals.
PRODUCT REGISTRATION
To ensure your full warranty and to receive product updates
and streamlined customer support, remember to register your
product at:
pureenrichment.com/productregistration
ARE YOU 100% SATISFIED?
If you have product questions or concerns don’t hesitate to
contact us directly at:
[email protected]
Pure Enrichment has an award-winning warranty, exchange, and
customer service program that guarantees hassle-free solutions
to any issue you might have within 24 hours!
6 7
FCC NOTICE
Model: WeightedWarmthTM Throw Blanket with Heat
(PEHTWGHT-G-RT)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Pure Enrichment
2803 S. Yale St.
Santa Ana, CA 92704
pureenrichment.com
The product is protected against unauthorized use. DO NOT
modify it without the authorization of the manufacturer, or the user’s
authority to operate could be voided.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.

Santa Ana, CA 92704
pureenrichment.com
REV: 07.07.22