Pure Essential Oil Works 308575 Installation instructions manual

Vitality LED Ultrasonic
Aroma Diffuser
IMPORTANT INSTRUCTIONS — RETAIN FOR FUTURE USE
Item #308575 & #308576
pureessentialoilworks.com • 800.520.6000
TNG Worldwide • New Hudson, MI 48165
©2020 TNG • Made in China
Warnings
• Be sure diffuser is placed on flat, stable surface before operating.
• Add fresh tap water. Mist will be low at first but will become normal.
• DO NOT fill diffuser over the max level.
• Only use 100% pure essential oils. Do not add minerals or other oils to diffuser.
• DO NOT add essential oil or open the cover while diffuser is working.
• Pour out remainder of water when not in use.
• DO NOT touch power cord with wet hands or allow to rest in water.
• Prevent any flammable items or toxic substance to be used near diffuser.
• Keep out of reach of children.
Precautions
• The concentration of the mist may vary. This is normal.
• Different water, humidity, temperature and airflow will impact mist intensity slightly.
• The unit CANNOT be activated without water inside the reservoir.
• Only use 100% pure natural aroma essential oil.
• Clean diffuser after use and before changing to another essential oil.
Accidental Spillage
In case of accidental spillage during operation:
1. Disconnect the power supply and then remove the cover.
2. Pour out the rest of the water entirely from the unit’s drain side.
3. Shake the unit lightly to pour out the water from the drain outlet and allow 24 hours
to dry before resuming use.
Maintenance
After using the diffuser for 5-6 times or 3-4 days, clean the diffuser as follows:
1. Disconnect the power and remove the cover.
2. Empty the water from the drainage outlet on the side of the water tank.
3. Take a cotton swab dipped in white vinegar and lightly scrub the ultrasonic plate and
around the tank. The ultrasonic plate should not come in contact with any hard or
sharp objects. Do not clean the diffuser with detergent.
4. Dry with a soft cloth.
• Keep dry and clean when not in use to avoid bacteria and mildew.
• Never immerse the diffuser in water or let water enter the air outlet.

Size 4.72” Round X 64.8”H
Weight About 0.7 lbs. (including USB cable)
Supply Power: input AC100-240V 50/60HZ
output DC 5V, 1A
Power 5W
Water Capacity 4 oz./120ml
Original material Imitation wood base + PP cover +PP water tank
Accessories USB cable, user manual
How to Operate
1. Connect power cord to the base of DC Jack
of the main body via cable guide.
2. Remove the cover in a vertical direction.
3. Add clean cool water to the water tank without exceeding
the maximum waterline of 120 ml. DO NOT refill
while the diffuser is in operation. DO NOT use hot
water or mineral water.
4. Add fragrance oil into the water (Advice one drop oil
per 100 ml water). Use more or less oil depending
on the level of intensity you prefer.
5. Put the cover back on the diffuser. DO NOT switch
on the unit without the cover shielding the water tank.
6. Attach the USB cable to power source.
7. Press the light/mist button on front of unit.
1st time: Mist on and colored LED lights cascade
2nd time: Fixes current LED light color
3rd time: Mist on, light off
4th time: Mist off, light off
When unit is working, press the button for over 3 seconds,
the unit will shut off (including mist and LED light).
8. If the water level inside the unit runs too low, the unit will automatically stop
operating.
9. When not in use for an extended period, pour any remaining water from the reservoir
before storing it in a cool and dry place.
Congratulations on your purchase of the Pure Essential Oil Works Vitality LED
Ultrasonic Aroma Diffuser. Please read the instructions and safety tips before use.
Your diffuser comes with a one-year limited warranty. If for any reason you need service,
please call 800-520-6000.
Specifications
This aroma diffuser uses ultrasonic
technology to mist the water
without heat for the most
beneficial results.