purflo PurAir User manual

Assembly Instructions
PurAir Breathable Crib
IMPORTANT: Retain for future reference, read before use

What’s in the box?
Components check list
Instructions on how to build and disassemble your PurAir Breathable Crib
Tips on how to care for your PurAir Breathable Crib
We believe baby sleep should be safe and sound and that’s why we
only develop carefully selected products that parents can trust.
Please do take the time to read this manual carefully before assembling and using this
product and keep it in a safe place for future reference.
We know you’re busy so we’ve tried to make our instructions straightforward and easy to
use. Should you have any feedback you think we have missed, that might help other
parents, please let us know.
Welcome to Purflo
1
i

WARNING
WARNING - Do not use this product without reading the instructions for use first
WARNING - Stop using the product as soon as the child can sit or kneel or pull itself up;
or has reached 20lbs/9kg whichever comes first
WARNING - Placing additional items in the product may cause suffocation
WARNING - Do not place the product close to another product, which could present
a danger or strangulation, e.g. strings, blind/curtain cords, etc
WARNING - Do not use more than one mattress in the product, do not exceed the maximum
height of the mattress as marked on the crib
WARNING - Before use, dispose of all plastic bags and packaging material and keep away
from children
WARNING - It is dangerous to use the Crib on any raised surface such as a table, it should be
placed on a flat and level floor
WARNING - The crib should be locked in the fixed position when the child is left unattended
WARNING - Do not position the Crib near walls and obstacles to prevent entrapment
WARNING - The Crib must be kept away from cords and electrical cables.
Do not position near windows where cords, curtains, or similar objects might
pose a choking or strangulation hazard
WARNING - Young children should not be allowed to play unsupervised in the vicinity of the Crib
WARNING - Only use the mattress provided by Purflo in this Crib. Never use any mattress that is
higher than the 20cm warning labelling inside the Crib
WARNING - Be aware of the risk of burning cigarettes, open fires and other sources of heat, such
as electric bar fires, gas fires etc. in the near vicinity of the Crib
WARNING - DO NOT use the Crib if any parts are missing, damaged, or broken. Contact Purflo for
replacement parts and instructional literature if needed. DO NOT substitute parts
WARNING - Check the Crib regularly before using it, especially after machine washing.
Ensure all seams are intact and there are no tears
WARNING - Only use the fitted sheets manufactured by Purflo, additional sheets can be purchased
from www.purflo.com
WARNING - DO NOT move or adjust the Crib with the baby inside
WARNING - DO NOT exceed the recommended weight of 20lbs/9kg
WARNING - Babies should always be placed on their backs to sleep, refer to Purflo safe sleep guide
2
IMPORTANT! KEEP FOR FUTURE REFERENCE
COMPLIES WITH EN 1130:2019 THE MATTRESS
COMPLIES WITH EN 16890:2017 BS7177:2008
SAFETY INFORMATION

Components checklist
3
WARNING:
Adult assembly required. Exercise care when unpacking and assembling product.
Keep small parts out of child’s reach. Care should be taken that all assembly fittings should
be tightened properly, and that care should be taken that no screws are loose because a child
could trap parts of the body or clothing which would pose risks of strangulation.
IMPORTANT:
Before assembly and use, inspect this product for damaged hardware, loose joints, torn fabrics,
missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact
hello@purflo.com for replacement parts and instructions if needed. Never substitute parts.
Electronic housing requires 3 AA (not included)
Tools required: Phillips head screwdriver (not included).
Please check the contents of the box against the list above. If anything is missing, please contact us.
A B DC
E F HG
I J
3

Frame assembly
Match
Match
* Insert 4 phillips screws (2 per side)
Important note: This step is only for assembly purposes.
The 4 screws do not need to be removed when dismantling
the Crib for travel or storage.
3
A
B
D
D
D
E
E
Click
Click
4
Click
Click
1
1
2
2
2
2
1
1
*Legs should angle in
Click
Click
*Snap into place
STEP 1 STEP 2
STEP 3
STEP 5
STEP 4
C
C
FF

Snap (10 times)
Snap (10 times)
Click (4 times)
Push out support bars
STEP 10
Basket assembly to frame
STEP 6
STEP 8
STEP 10 STEP 11
STEP 9
STEP 7
G
H
Click (10 times)
Complete frame
Remove mattress Lift top rail
Crib assembly
5

Snap (10 times)
Replace mattress
Complete Crib
STEP 12
H
Open zip to access the toy bar channel.
Ensure Zip is closed when toy bar is removed.
Lullaby
Music
Nature
Sounds
Gentle
Vibration
Night
Light
• Do not mix old and new batteries
•Do not mix alkaline, standard or rechargeable batteries
•Remove batteries when unit is stored for a long period of time or when batteries are exhausted
•Dispose of exhausted batteries properly
BATTERY WARNING:
Baby soothing centre set up
STEP 14
3 AA
I
Crib assembly
STEP 12
STEP 14
STEP 15 STEP 16
STEP 13
J
6

When positioning the crib on the frame,
ensure that the toy bar is the same end
as the vertical legs
•
Crib operation
Connecting crib to frame
Removing crib from frame
Click
Look for
‘green’ dot
Always be sure the Crib is properly latched to the frame before use. Pull up on carry handles to
be sure the Crib does not separate from the frame. DO NOT use on frame if Crib will not properly
latch on.
IMPORTANT:
7

Using crib separate from frame
Baby soothing centre operation
•Press for music
•Press to increase volume
• Press to turn off
• Auto shut off feature
•Press for Nature Sounds
•Press to increase volume
• Press to turn off
• Auto shut off feature
•Press for Vibration
•Press to increase speed
• Press to turn off
• Auto shut off feature
•Press to turn light on
• Press to turn off
• Auto shut off feature
WARNING:
• NEVER use near stairs or steps
• Child’s movement can slide Crib. NEVER place Crib near edges of counter tops, tables, or other
elevated surfaces
• Your Crib can roll over on soft surfaces and suffocate child. NEVER place Crib on beds, sofas or other
soft surfaces
• NEVER use the Crib as a means to transport an infant in a motor vehicle
8

Cleaning and maintenance
• PurAir Breathable Crib Cover and Storage Basket: Machine washable at 40°C, do not bleach,
hang to dry
• Mattress Sheet: Machine washable at 40°C, do not bleach, tumble dry low heat
• Mattress Pad: Machine washable at 30°C, air dry
• PurAir Breathable Crib frame, metal and plastic parts: surface wipe, air dry
• Check PurAir Breathable Crib regularly before use.
• Do not use if any parts are loose or missing or if there are any signs of damage.
• Do not substitute parts.
• Contact the manufacturer if replacement parts or additional instructions are needed.
Crib
Outer: 65% Polyester / 35% Cotton
Filling: 100% Polyester Fiber
Storage Basket: 100% Polyester
Washing instructions:
Do not tumble dry
Toys
Outer: 100% Polyester
Filling: 100% Polyester Fiber
Washing instructions:
Do not tumble dry
9

Getting in touch
If you have any questions, queries, missing parts
or feedback about this product please get in touch.
Email us: hello@purflo.com
Call us: [phone]
Weybury Hildreth Ltd
Bay 1 Building 47, Second Avenue
The Pensnett Estate, Kingswinford
West Midlands, DY6 7UZ
BATCH NO
Made in China
Radio and television interference
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. however, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Consult the dealer or experienced radio/TV technician for help
Changes or modifications not expressively approved by the manufacturer responsible
for compliance could void the user’s authority to operate the equipment.
visit
www.purflo.com
10