PURPLE LEAF CLASSIC Installation and operating instructions

PURPLE LEAF
Cantilever Umbrella
Assembly and Operation Manual
CLASSIC
©Copyright 2016-2023 Purple Leaf Inc.

PURPLE LEAF
Thank you for your purchase of
PURPLE LEAF’s Cantilever Umbrella
Read and follow this assembly and operation guide.
To avoid personal injury and damage to your umbrella,
please close your umbrella when it is incoming over 30 mph wind.
We recommend a two-person team for assembly and disassembly.
If you like our products, please tell other customers.
If you have problem with our products, please tell us.
Please feel free to contact us.

Cover Plate
Connector Knob
Base Tube
C
B
H
Instruction Book

Umbrella Cover
Umbrella Canopy
Bolt×4
(8mm*25mm)
Washer×4
Allen Wrench Hand Crank
P
G
E
F
A
I

6
Base Tube AssemblyBase Tube Assembly
1
Option 1 / Water Tank Base
(Sold Separately)
E
C
F
B
Note: Remove four
black plastic sleeves
before installing the
base tube.

7
Base Tube AssemblyBase Tube Assembly 1
Option 2 / Inground Base
(Sold Separately)
gently
put it down
24‘’
That is horizontal.
28‘’
Concrete >700lbs

8
Base Tube AssemblyBase Tube Assembly
1
Option 2 / Inground Base
(Sold Separately)
E
C
F
B
Standard umbrella
For special accessories

9
Base Tube AssemblyBase Tube Assembly
Option 3 / Baseplate
(Sold Separately)
4.44 in4.44 in
6.29 in6.29 in
Ø1/2 inØ1/2 in
1

10
Option 3 / Baseplate
(Sold Separately)
E
C
F
B
1/4 inch ×16
1Base Tube AssemblyBase Tube Assembly
Use 1/4 inch -diameter
galvanized/stainless lag
screws to mount the plate
to the deck(included in the
package).

11
Base Tube AssemblyBase Tube Assembly 1
ImportantImportant
Prior to assembly, it is important to choose the location
of the umbrella.
•Allow ample height to avoid damage to your umbrella during
assembly and usage.
•Choose a location that is level and sturdy.
•Consider a location that will maximize the umbrella’s rotating
swivel function. Placing the umbrella between two entertaining
areas is ideal.
•To avoid personal injury or damage to the umbrella, make sure
the area around you is clear from any outdoor structure or
furniture.
•Keep all the flame and heat sources away from this umbrella.
STORAGE: Properly store the umbrella when not in use. Close
the umbrella, fasten the strap around the canopy and cover
the umbrella with a protective cover.
NOTE: DO NOT discard any packaging or box until assembly is
complete.
CAUTION: Moving the umbrella when it is fully open will
increase the risk of damage to your umbrella or will cause
serious injury. We recommend a two-person team for assembly
and disassembly.

12
Umbrella AssemblyUmbrella Assembly
2
H
G
Two-persons recommended for team lift and to complete
assembly.
Insert the main pole onto the base tube(B) with the
cover plate(C) installed.
Insert the connector knob (H) to the matched-up holes.
Be mindful of the packaging in the umbrella canopy.
It MUST be removed before opening.

13
OperationOperation 3
CAUTION: Stop turning the crank handle
as soon as the umbrella cover is completely
open and the sleeve on the umbrella pole has
reached its maximum height.
IMPORTANT: PRIOR TO USING THE TILT
FUNCTION.
To avoid personal injury or damage to the
umbrella, make sure the area behind you is
clear and free from any furniture or structure.

14
OperationOperation
lift
push
Operation
To Open Canopy
1. Slide the umbrella handle to the top of the pole by
squeezing the trigger.
2.Insert the hand crank(I) into the small hole of the
handle on the post.
Be sure to remove all the
protective material inside.
3
squeeze
the
trigger
Note: Be mindful of the packaging in the umbrella
canopy. It MUST be removed before opening.

15
OperationOperationOperation 3

16
3
To Tilt Canopy
OperationOperation
Press on the handle trigger and move the handle up and down
to adjust the angle of the umbrella canopy.
IMPORTANT: PRIOR TO USING THE TILT FUNCTION.
To avoid personal injury or damage to the umbrella, make sure
the area behind you is clear and free from any furniture or
structure.

17
To Operate the 360° Rotation
Insert the hand crank(I) into the hole
near the bottom of the umbrella, turn
the crank to rotate it.
3
OperationOperation

18
OperationOperation
To Install Umbrella Light
(Sold Separately)
3

19
OperationOperation
To Protect the Umbrella
P
zip up to close
3
1. The umbrella cover should only be used when umbrella fabric is
completely dry.
2. Umbrella should be closed or stored indoors during windy conditions.
3. Do not use the umbrella during windy or severe weather conditions.

20
SAFETY PRECAUTIONS
Close the umbrella in windy conditions or when
a storm approaches.
Never allow the umbrella to flap in the wind. This
could damage the canopy.
Properly store umbrella when not in use. Close
umbrella, and cover umbrella with a protective
cover.
Do not leave an open umbrella unattended.
If damage occurs, this is not covered by the
warranty.
When adjusting the umbrella, make sure that
no person(s) or item(s) are close to the umbrella.
This is important to prevent injury or material
damage.
This warranty does not cover the
following items:
Failure caused by unreasonable or abusive use.
Failure caused by neglect of reasonable and necessary
care.
Acts of nature (including but not limited to wind,
hurricanes, tornadoes, and storms) are not covered by
this warranty.
Notification
4