Pursonic S620 DELUXE User manual

● Consult your physician or implant device manufacturer prior to using this product if you
have questions concerning the combined use of this product with a pacemaker or other
implanted medical device(s).
WARNINGS
To reduce the risk of burns, electrocution, fire, or injury to persons:
● This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, unless
they have been given adequate supervision or instruction concerning use of the product
by an adult responsible for their safety.
● Children should be supervised to ensure they do not play with the product.
● Use this product only for its intended use as described in this manual. This product is
designed to clean your teeth, gums and tongue only. Do not use any attachments or
brush heads other than those recommended by the manufacturer.
● If your toothpaste includes peroxide, baking soda or other bicarbonate (common in
whitening toothpastes), thoroughly clean your brush head and handle to avoid cracking
the plastic.
● Certain liquid mouthwash may damage the product by causing the housing or tank to
crack, when using mouthwash, rinse the tank and main unit with water immediately after
use. Be especially careful when washing the hose connections at the main unit and the
tank.
● Never fill the tank with hot water! The gumlines can be very sensitive and can be easily
damaged by hot water.
● Use the unit within an ambient temperature range of 32F-104F.
● Never operate this product if it has a damaged cord, plug or charger. Do not use this
product if it is not working properly, if it has been dropped or damaged or dropped into
water. Immediately discontinue use if the product appears damaged in any way.
● Keep the product away from heated surfaces.
● If you experience discomfort or pain in your mouth, discontinue use of this product and
contact you dentist.
● Do not clean the product in the dishwasher.
● Consult your physician prior to using the toothbrush if you have any medical concerns.
● The toothbrush has been tested and is certified as per ETL and CE regulations.
● Never drop or insert any object into any opening.
● For household use.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
Please read the safety instructions before using this product. The safety instructions
provided here are to help you use this product safely and correctly, and also to prevent
you from injuring yourself or others.
When using electrical products, especially when children are present, basic safety
precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER-WATER
To reduce the risk of burns, electrocution, fire, or injury to persons:
● Do not place or store the product where it can fall or be pulled into a bathtub, sink or
toilet.
● Do not place or drop the charger into water or other liquid.
● Do not reach for the charger that has fallen into water or other liquid. Unplug
immediately.
● Do not use while bathing.
● Unplug charger before cleaning and assure that it is dry before plugging it into an
electrical outlet.
DANGER-VOLTAGE
To reduce the risk of burns, electrocution, fire, or injury to persons:
● Do not plug the charger base into an outlet with a voltage other than specified on the
bottom of the charger.
● Voltage converters do not guarantee compatibility.
● Do not force the plug into an outlet.
● If the plug does not fit easily into the outlet, discontinue use.
●
MEDICAL-WARNINGS
● If you have had oral surgery or gum surgery within the past two months, consult your
dentist before using the product.
● Consult your dentist if excessive bleeding occurs while using this product or minor
bleeding continues to occur after one week of use.
This appliance has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
S620 DELUXE
PU RE, F RESH AN D SONIC C LEAN
ON/OFF button
Suction hose
Mode button
Filter
Mode indicator
ORAL IRRIGATOR
Tongue Cleaner Tip
Nozzle
Water tank cap
Water tank
Identification ring
Orthodontic Tip
MAIN UNIT
ACCESSORY
Make sure your oral irrigator and the appliance are dry when inserting
the batteries.
Oral Irrigator operates on 3 AA-size 1.5V alkaline batteries(not
included)
1. Remove the battery door by rotating the battery door knob in
counter- clockwise direction. (Fig.1)
2. Be sure the +and -poles of the batteries match the-appropriate
location inside the battery box.
3. Insert the batteries into the battery box in the correct polarity.
4. Firmly push the battery door back onto the battery box, and rotate
the battery door knob to the "Close" position.
Pulse
Fig.1
Fig.4
Fig.2
Fig.3
Fig.5
Fig. 6
GETTING STARTED
HOW TO USE
1. Attach the nozzle and the tank firmly onto the unit (Fig.2)
2. Open the cap of the water tank, hold the unit so it is vertical, and fill
the tank with cold or warm water, not hotter than 104F, Be sure the
water tank is always removed from the main unit before refilling.(Fig.3)
● Do not put salt, toothpaste, powder or other chemicals into the water
tank.
● Do not operate the unit when empty other than when pouring out
any remaining water after use. Operating the unit without water may
result in a malfunction and will void the warranty.
3. Close the cap, making sure it locks in place.
4. Press the mode switch and select the desired water jet mode.
● The mode indicator will display the previously selected mode.
● If you want to use a different mode, press the mode switch until it
changes to the desired setting. Pressing the mode switch will change
the mode from normal to soft to pulse.
MODE AND ITS INDICATOR (Fig.4)
① Mode switch: Pressing the mode switch will change the water jet
setting and the respective mode indicator will light up.
② Normal mode: This mode is for removing food particles trapped
between the teeth.
③ Soft mode: This mode is for gently massaging the gums.
④Pulse mode: This mode is for removing food particles and for
massaging the gums and rinsing between the teeth and gums.
NOTES: When you use the unit for the first time, press the operation
switch to turn the unit on and test each of the water jet modes with the
tank filled with water.
5. Insert the nozzle into your mouth.
● Bend over the sink and hold the unit in an upright position with the
nozzle pointing toward your teeth.
6. Press the operation switch.
● Close your mouth slightly to contain the water spray.
● The unit starts operating in the mode selected in step 4 above.
● A fully filled water tank provides approximately 45 seconds of use.
● Do Not turn the switch on before putting the nozzle in your mouth.
● Do Not hold the tip of the nozzle firmly against the teeth or gums.
7. Turn the nozzle wheel with your thumb to reach all areas in your
mouth. (Fig.5)
● Keep your mouth slightly opened so that the water can flow out.
● Systematically rinse all teeth and the spaces between them.
● Make sure that you always hold the device in an upright position with
the nozzle pointing upwards. If you turn the device upside down, no
water from the tank will be taken in.
● Remember that rinsing the mouth is not a substitute for tooth
brushing. Brush your teeth or dental prosthesis after a meal for at least
five minutes and then use this device.
● Do not place the nozzle firmly against the teeth or gums. Doing so
may damage your teeth or gums.
8. Use of the Orthodontic Tip (Fig.6)
● Start on the last molar (back tooth). Aim water stream at 90° to the
tooth at the gum line. Gently glide tip along gumline, pausing briefly to
lightly brush area between teeth and all around orthodontic brackets,
before proceeding to the next tooth. Continue process until you have
cleaned the inside and outside of both the upper and lower teeth.
● Do not scrub or press hard, simply let the brush do all the work.
9. Use of the Tongue Cleaner Tip (Fig.7)
● To use the Tongue Cleaner Tip, set the unit to the lowest pressure
setting. Gently place the tongue cleaner in the center/midline of your
tongue, about halfway back and start the water flosser. With light
pressure pull forward. You can increase pressure as you prefer.
10. After use, press the operation switch to turn off the unit. Fig.7

Cleaning the Oral Irrigator device
Switch off the device and remove the water tank and the jet nozzle.
●Do not wash with hot water exceeding 122F.
●Use only water or a neutral cleaning agent to clean the main unit. Never use caustic or
abrasive agents (e.g.,vinegar or limescale removers),since they may damage the device.
MAIN UNIT
Use a cloth to clean the main unit. Wash hard-to-remove stains with water.
●Do not submerge the main unit in water.
●After washing with water, wipe dry with a cloth.
WATER TANK
Wash the water tank in water.
●Pour out the water inside the tank after cleaning.
●If you do not intend to use the device for a week or more, dry the inside and outside of the
tank.
●If cleaning requires a detergent, use a mild, neutral cleanser.
●Do not use harsh chemicals such as thinner, benzine or alcohol as these will discolor the
surface. About once every six months wipe the prongs of the plug with a dry cloth.
MAINTENANCE
TROUBLESHOOTING
BRUSH HANDLE
CHARGER
Professional brush head
Power / Mode button
Mode indicator
Charging indicator
Power plug
Power cord
Charging cradle
Brush head stand
Storage
Storage cover
Interdental brush head
ACCESSORY
GETTING STARTED
Charging the toothbrush
● Be sure to turn off the toothbrush before charging. (Fig.1)
Place the handle in the charger. The charging indicator will light up
blue. (Fig.2)
Notes:
● It takes at least 24 hours to fully charge the battery.
● The toothbrush must be charged for 24 hours if:
a. this is the first time using the toothbrush;
b. the toothbrush has not been used for more than 3 months;
● To keep the battery fully charged, we recommend that you keep the
toothbrush in the charger when not in use. It cannot overcharge.
● During charging, the toothbrush will get warm, but this is normal.
● The operating duration will become shorter as the battery gets
older. If the toothbrush operates only for 1 short time after being fully
charged, this means that the battery is nearing the end of its life
cycle. Contact service center for support.
1. Slide the brush head onto the handle. Push brush head down until
it locks into place on handle.
Notes: There is small gap between color ring and the handle.(Fig. 3)
2. Wet the bristles and apply a small mount of toothpaste.
3. Place the bristles against the teeth at a slight angle towards the
gum line.(Fig. 4)
4. Press the Power / Mode button to turn on the toothbrush. It starts
working at Cleaning mode.
a. Cleaning(H):
Standard mode for superior teeth cleaning;
b. Whitening(S):
Teeth cleaning with polishing and whitening;
c. Massaging(M):
Pulsates for gentle gum stimulation.
Notes: During brushing, if press the Power / Mode button, toothbrush
will work at next mode and start another 2 minutes cycle. The
function turn of the button is: power on at cleaning mode, whitening
mode, massaging mode and power off.
5. Apply light pressure and gently move the brush head slowly
across the teeth in a small back and forth motion.
6. In order to maximize cleaning effectiveness, divide your mouth in 4
sections. Start with Section 1 and brush each section for 30 seconds.
The brushing action will pause between each 30 second interval,
indicating when to move on to the next section. The toothbrush will
automatically stop after 2 minutes of use. (Fig. 5)
7. Use of the Interdental Brush Head
●Specially designed shape is ideal for cleaning braces, crowns or
spaces between poorly aligned teeth.
●Place the brush lightly and vertically against your teeth. Guide the
brush head slowly along the gap between the teeth. (Fig.6)
8. Pull brush head to detach from the toothbrush.
9. Rinse both the brush head and handle under running water wipe
them dry. (Fig. 7)
10. Place the handle back into the charger base.
Fig.1
Fig.2
45
Fig.4
Fig.3
HOW TO USE
1
2
Fig. 5
Fig. 6
MAINTENANCE
DENTAL MIRROR
Be sure to remove the plug from the electrical outlet before cleaning
the unit.
Charger
● Pull the storage chamber up to remove. (Fig. 8)
● Using a soft cloth, wipe off any dirt on the charger base and the
storage chamber. (Fig. 9)
● Clean the plug periodically to ensure it remains in good working
order. The accumulation of dust or dirt on the plug can cause an
electric shock, overheat or fire.
Toothbrush
● Remove the brush head.
● Wipe all surface areas with a damp cloth and place the handle
back into the charger. Do not submerge the handle into water.
● Rinse the brush head and bristles after each use.
● Do not clean in the dishwasher.
● Any other servicing should be performed by an authorized service
representative or that the product has no user serviceable parts.
Fig. 7
Fig 8
Fig 9
TROUBLESHOOTING
Problem
The toothbrush
doesn’t work.
Weak or diminished
vibration.
The toothbrush operates
only for a short period of
time even immediately
after being charged.
Possible cause
You have just purchased the
product or it has not been
used for more than 3 months.
The toothbrush is pressed
hard against your teeth.
Charging time was
insufficient.
The battery has reached
the end of its life cycle.
Solution
Charge the main unit for
at least 24 hours.
Place the brush head
gently against your teeth.
Charge the main unit for
at least 24 hours.
Contact service center
for support.
DISPOSAL
The power source of this product is nickel-metal hydride battery which can be recycled. At the
end of the product's life, always remove the battery before you discard the product. Recycle
or dispose of the battery properly, according to local waste management requirements. If you have
recycling questions, contact your local waste management office.
Batteries
Removing and recycling the battery
Do not disassemble the product at any time other than when
disposing of it. Doing so earlier will destroy the product.
Observe basic safety precautions. The appliance must be
disconnected from the supply mains when removing the
battery.
Use of the Dental Mirror (Fig.1)
Allows vision in certain locations of the mouth where visibility is
difficult or impossible.
By pressing the power button the LED mirror light will light up.
Press again, the LED mirror light will go off.
Fig.1
Fig.10
Fig.11
Fig.12
24小时
H
S
M
CH
AFTER USE (Fig.8)
1.With the nozzle still attached, open the cap of the water tank
and pour out the water.
2.Switch on the device for a few seconds to pump out any
remaining water.
● Be sure to turn off the product while the nozzle is still inside
your mouth.
●Always pour out the remaining water and empty out the nozzle.
●This helps to prevent contamination and bacterial growth in the
remaining water.
●Before removing the battery, be sure to completely drain
the unit of power.
● Use a screwdriver to remove the screw cover and battery
door. (Fig.10)
● Hold the handle upside down, press the toothbrush
shaft, and remove the two hooks to release the internal
components of the handle. (Fig.11)
● Insert the screwdriver next to the battery connections,
and twist to break the connections. Remove the circuit
board and pry the battery from the plastic carrier. (Fig.12)
● Recycle or dispose of the battery properly. Ask your
local waste management office if they accept the remaining
toothbrush components for recycling.
Fig.8
SONIC TOOTHBRUSH
TROUBLESHOOTING
Problem Possible cause
Mode indicator
does not light up
or light drak.
Not inserting batteries
or the batteries
are too weak.
The pump is running
but no water comes
out of the nozzle.
The tank is empty.
Wrong position.
Filter is clogged.
The nozzle is clogged
or deformed.
Remedy
Check for batteries
or replace with new fresh batteries.
Fill up tank.
Use the porduct in an upright
position with the nozzle
pointing upwards.
Use another nozzle.
Clean filter.
For Customer Service in the U.S.
Please Call 212-414-1798
WWW.PURSONICUSA.COM
Distributed by Samsonic T.C.
New York, NY 10001 Printed in China