PX DSC-IR100A User manual

REMOTE CONTROLEXTENDER
DSC-IR100A
USER MANUAL

ProductDescription
Applications
The Remote operation of electronics products that utilize IR
(Infrared) remote control technology such as:
The DSC-IR100AWireless InfraredRemote ControlExtender enables
you to extend their range of your present Infrared IR Remote Control so
that
y
ou cano
p
erate VCRs, stereos, Cable Converter, Satellite receivers,
etc. Virtually any where within your home.
Unlike ordinary remotecontrolswhichareonly effective inclose range.
" line of sight" use, TheDSC-IR100A uses radio frequenciesand can
operate throughwalls, doors, around corners, etc.
Television
VCR's (Video Cassette Recorders)
CDs(Compact Disc)
DVD's (Digital VideoDisc)
LDP's (Laser Disc Players)
Cable Converter Boxes
Satellite Receivers
Audio / Hi-Fi Stereo Systems
Wireless Video Sender Systems
Any (IR) Remote Controlled Devices

Installation
Transmitter:
Receiver / Probe:
You will be using your normal IR remote control and "aiming" it at DSC-
IR100A IR extender transmitter.
1. Plu
g
thesu
pp
lied AC ada
p
ter into an
y
standardelectrical wall outlet.
2. Connect the other end of the AC ada
p
ter cable in the"
p
ower in"socket
located on the side of your transmitterunit.
3. Place thetransmitter in the remote locationso that it isin the lineof
si
g
htofthe
p
osition where
y
ou are located
(
couch,chair,bed,etc.
)
so
that you can "aim" your remote control atthe transmitter.
1. Plug thesupplied AC adapter into any standard electrical wall outlet.
2. Connect the other end of the AC adapter cable into the "power in"
socketlocated on the side ofthe receiver unit.
3. Place the DSC-IR100A receiver ina high, line-of-sight position
facing in front of the electronic device you are going to control.
Be certain that there are no obstructions between the DSC-IR100A
receiver and theinfrared
4. In situationwhere it is not possible or convenient to place the DSC-IR
100A
a high location, or near the equipment being
controlled, and have the
receiving windowof the
Plugone end of the probecableintothe jack located on the sideofthe
DSC-IR100A receiver.Attach the other end ofthe probe to the IR
receiving
attached to the probe.
receiving windowof the equipment.
receiver inline-of-sight of the controlledequipment, a
remote probe is supplied. The remote probe enables you to place the
DSC-IR100A receiver in
probe transmit theIRdata directly to the IR
equipment.
window of the equipment being controlled using to double
stick tape

INSTALLATION DIAGRAM
B. StereoSystem withremoteProbe:
A. Stereo System:

D. VCR / TV /Wireless VideoSystem with remote Probe:
C. VCR / TV /Wireless VideoSystem:

CareandMaintenance
Kee
p
the DSC-IR100A Remote Extender dr
y
. If it
g
ets wet, wi
p
e it dr
y
immediately.
Use and store the DSC-IR100A onl
y
innormal tem
p
eratureenvironm
ents.Extreme tem
p
erature can shorten the lifeof electronic devices
Handle the DSC-IR100A gently and carefully. Dropping it can damage
the circuit board anccan causeit to work improperly.
Keep the DSC-IR100A away from dust and dirt, which can cause
wear of parts.
Wipe the DSC-IR100A with adamp cloth occasionally to keep it
Do not useharsh chemicals, cleaning solvents, or strong
detergents.
premature
looking new.
Specifications
O
p
eratin
g
Volta
g
e .......................................105-130VAC, 60Hz
Power Consumption (pair)............................4Watts Max
Transmission Frequency...............................418 MHz + / - 1 MHz