PXM PxAqua 3 SH User manual

Manual
PX229
PxAqua 3
SH/SP
R

CONTENTS
1. General description...................................................................................................
2. Safety conditions.......................................................................................................
3. Information about the lamp version...........................................................................
4. Lamp description.......................................................................................................
5. Connections scheme.................................................................................................
6. Dimensions................................................................................................................
7. Technical specification...............................................................................................
8. Declaration of conformity...........................................................................................
3
3
5
6
7
9
9
10
Manufacturer reserves the right to make modifications in order to improve device
operation.
tel.: [phone]
fax: [phone]
E-mail: [email protected]
Internet: www.pxm.pl
Rev 1.6
PXM Marek Żupnik spółka komandytowa
Podłęże 654
32-003 Podłęże

3
Underwater lamp LED LAMP PX229 with an adjustable handle has built-in 3 LEDs.
The PX229 lamp is designed for both underwater and open air installations, which require high
brightness lighting. In underwater sollutions the lamp can be powered with 700 mA current and
reach 3x3 W of power (in open air sollutions it has to work with 350 mA power supply and reach
3x1 W).
When connected to an external controller it allows to obtain a full spectrum of 16 million colors (in
®
theory). Use of high-quality Luxeon Rebel LEDs provide bright light with low power consumption.
When purchasing lamps customer can choose the appropriate scattering angle lenses and color
LEDs to be installed. This allows to adapt the device to the specific conditions.
The casing is made of stainless steel, which protects against harmful external conditions.
A specially made adjustable handle simplifies installation. For underwater instalations we provide
with product stailess steel tube for flush-mounting.
1. GENERAL DESCRIPTION
2. SAFETY CONDITIONS
Caution! Before installing, connecting and using
the lamp you have to absolutely read this document.
The following symbols are used to underline important information on security conditions on
the product and in this manual.
Danger!
Risk of loss of life
and health.
Warning!
Fire hazard.
Warning!
LED light
emission.
The risk of eye
damage.
Warning!
The risk of burns.
Warning!
Read the
instruction
manual.
ESD Protection!
Read the
instruction
manual.
Caution!
Do not look at the LEDs at a shorter distance than 1.8 m from the front surface of the tube
without proper eye protection. LEDs can cause damage or eye irritation.Do not look at the
light source directly through any optical instruments, which focus the light rays.

The PX229 LED lamp is powered with 3x350 or 3x700 mA current and safe voltage up to 48 V, but
during the installation and use the following rules must be strictly observed:
1. Installation, particularly power connection, should be performed by a person holding the
appropriate qualifications, according to this manual.
2. The lamp can be connected only to a current source of a magnitude 3x350 or 3x700 mA
(3x700 mA only in underwater installations) according to described in paragraph 5 conditions.
3. All wires must be protected against mechanical and thermal damage.
4. In case of damaging any conductor, it should be replaced with a conductor of the same
technical parameters.
5. All repairs can be performed only with power supply disconnected.
6. Wait 20 minutes after turning the lamp off before attempting to do any maintenance.
7. Prior to any maintenance of the module inside of the lamp, discharge any static electricity that
may damage the LEDs, by touching the grounded elements. Also remember not to use
nearby the LED module any soldering transformer.
8. All flammable materials (e.g. textiles, wood, paper, etc.) should be kept in a safe distance of at
least 0.3 m from the outer surface of the housing.
9. Do not connect the power supply to a lamp with visible damage.
10. It is essential to protect the module located in the lamp PX229 from contact with water and
other fluids.
11. All sudden shocks, particularly dropping, should be avoided.
12. Do not use in open air with temperatures higher than + 40°C.
13. The device can be installed and used in accordance with the conditions contained in this
manual, as well as applicable standards and regulations not listed in this document.
4
In case of improper usage of the product it may cause a risk of serious injury or
death because of the threat of fire.
While working at an ambient temperature of 25°C housing unit can heat up to
65°C. Because of the danger of burns, avoid direct contact with the casing.
Keep ESD protection because the module and installed LEDs may be damaged
by static electricity generated in equipment, people, tools and other insulators
or semiconductors.

The PX229 lamp is available in several versions differing in angle of used lenses.
Below is a description of the PX229 models designations and their explanation.
PX229 - XX - YYY - ZZ
XX - lens angle o
10 - 10o
25 - 25o
45 - 45
YYY - LEDs colors
W - warm white
N - neutral white
C - cold white
R - red
G - green
B - blue
A - amber
ZZ - casing version
SH - with a handle
SP - with steel pipe
When ordering, select the lamp LEDs color and beam angle of lenses to be placed in the device
Example of lamp marking:
PX229 - 25 - RGB - SH
Casing version:
Waterproof IP68.
Casing is in accordance with IP68 standard, allows to use the device underwater in applications
such as fountains, pools, and in places exposed to adverse weather conditions.
3. INFORMATION ABOUT THE LAMP VERSION
LEDs color: red, green, blue
o
25 lenses
Lamp version
5
Casing version: with a handle

4. DESCRIPTION
6
3 LEDs
1
2
Handle
3 holes for fastening screws
3
4
2 screws with washer fastening the holder and casing together (allows you
to adjust the angle the lamp in the vertical plane)
4
2
3
1

The RGB version of lamp is connected via 6-strand cable, e.g. shown in the figures below.
5. CONNECTIONS SCHEME
4
1
2
6
2
3
5
RED + (red)
RED - (red with black stripe)
1
2
GREEN - (green with black stripe)
GREEN + (green)
3
BLUE - (blue with black stripe)
BLUE + (blue)
5
6
4
4
1
2
6
2
3
5
RED + (red)
RED - (white)
1
2
GREEN - (black)
GREEN + (green)
3
BLUE - (yellow)
BLUE + (blue)
5
6
4
7
Example of connection the PX229 lamp to the LED driver PX 305.
Wires should be connected with an appropriate sequence of colors.
!!! Lamps have to be connected only in series !!!
a) RGB lamp connection
to subsequent
modules
Max number of lamp that can be
connected differs from chosen
LED driver.
Tables visible on next page show
correct quantities
driver LED
RED +
RED -
GREEN +GREEN -
BLUE +BLUE -
RED - GREEN - BLUE -
RED +
GREEN + BLUE +

8
b) Monochromatic lamps connection
PY 410
current power supply
DC OUT
AC IN
L
N
+ (brown)
– (white)
1
2
1
2
Cables for monochrome versions:
or
1
2
+ (red)
– (black)
1
2
driver LED
Driver LED
Power supply
Quantity of
powered lamps
PX305
12 V DC
1 ÷ 3
24 V DC
4 ÷ 6
PX308
12 V DC
1 ÷ 3
24 V DC
4 ÷ 6
48 V DC
7 ÷ 12
PX215
12 V DC
1 ÷ 3
24 V DC
4 ÷ 6
48 V DC
7 ÷ 12
Power supply 350 mA
Driver LED
Power supply
Quantity of
powered lamps
PX307
12 V DC
1 ÷ 3
24 V DC
4 ÷ 6
PX184
12 V DC
1 ÷ 3
24 V DC
4 ÷ 6
48 V DC
7 ÷ 12
Power supply 700 mA
Power supply 350 mA
Driver LED
Power supply
Quantity of
powered lamps
PX305
12 V DC
3
24 V DC
6
PX308
12 V DC
3
24 V DC
6
48 V DC
12
PX215
12 V DC
3
24 V DC
6
48 V DC
12
–
PY410
1 ÷ 4
Power supply 700 mA
Driver LED
Power supply
Quantity of
powered lamps
PX307
12 V DC
3
24 V DC
6
PX184
12 V DC
3
24 V DC
6
48 V DC
12
–
PY412
1 ÷ 4

9
6. DIMENSIONS
27
75 mm
48,5 mm
7. TECHNICAL DATA
48,5 mm
120 mm
48,3 mm
Version with handle (PX229-SH)
Version for flush mount (PX229-SP)
sealing O-ring
stainless-steel tube
wall thickness: 2mm
5 mm
Type:
Power supply:
IP Rating:
Beam angles:
Brightness (for 25° lens in 1 meter dist.):
The number of possible colors:
Weight:
Dimensions:
PX 229
PX 229-H - a handle version
PX 229-P - a flush mounting version
3 x 350 mA
IP68
o o o
25 (typical), 10 / 45 (on request)
approx. 1100 lux
16 million (in theory)
0,32 kg
Diameter: 48,5 mm
Height: 80 mm
A-A
12,5 21,5
ø5,5
15
A A

10
PXM Marek Żupnik spółka komandytowa
Podłęże 654, 32-003 Podłęże
declares under our sole responsibility that the product:
Name of product: PxAqua 3 S
Type: PX 229
compiles with the following standards and harmonized standards:
PN-EN 50581:2013, EN 50581:2012
PN-EN 60598-1:2015, EN 60598-1:2015
PN-EN 62471:2010, EN 62471:2008
and is in conformity with the provisions of the following EC Directives:
2011/65/UE
Podłęże, 27.10.2016 mgr inż. Marek Żupnik.
DECLARATION OF CONFORMITY
tel: [phone]
fax: [phone]
e-mail: [email protected]
http://www.pxm.pl
Podłęże 654
32-003 Podłęże
Konsole teatralne i estradowe Cyfrowe ściemniacze mocy System DMX Sterowniki Architektoniczne Oświetlenie LED
DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment Text with EEA relevance.