Pyle Pro PDMXi4U User manual

Owner’s Manual
WWW.PYLEAUDIO.COM
2 Channel Dual iPod DJ Mixer
2 Channel Dual iPod DJ Mixer

PDMXi4U
INPUT SECTION FEATURES
1) THE POWER INDICATION
When the power was on, the light was red illuminate.
2) MASTER LEVEL
The master output rotary knob adjust the volume of the main master output.
3) REPLACEABLE CROSSFADER
Achieves clean segues between the two input channel, Hard left selects channel
1.Hard right selects channel 2. With the, crossfader centered, buth assingned
channeles are live. Use the crossfader for fast and seamless segues seues from one
selected channel to other.
4) iPod PORT
To connect the iPod device.
2 Channel Dual iPod DJ Mixer

5) PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to
pause or from pause to play. The PLAY/PAUSE remains lit when in PLAY mode,
while it blinks in PAUSE mode.
6) SKIP BUTTON
Use this switch to re-start the track or to select the last track.
7) SKIP BUTTON
Use this knob to select the next track.
8) CH1&CH2 GAIN CONTROL
Adjust CH1&CH2 level.The channel rotary gain allows you to boost the signal of
each individual channel depending on how low or high its input level is.
9) HIGH FADER (CH1/CH2):
Adjust CH1&CH2 equalization of high.You can use the adjustment knobs to higher.
10) LOW FADER (CH1/CH2)
Adjust CH1&CH2 equalization of low.
11) MID FADER (CH1/CH2)
Adjust CH1&CH2 equalization of mid.
12) VOLUME (CH1/CH2)
Adjust the volume level of CH1&CH2.
13) MICROPHONE
Plug 1/4” microphone in here.You can control the gain for MIC.
14) MIC GAIN
Adjust the level of microphone.
15) MIC TONE
Adjust the TONE of microphone.
16) CHANNEL CUE SELECTOR
After you have chose which input you will use with the input selector thee
correspodonding channel fader will allow you to adjust the volume for that particular
channel.
17) CUE LEVEL
Adjust the level of CUE.The CUE LEVEL adjust your headphone output’s level.
18) HEADPHONE
Plug 1/4” microphone in here.

19) CONVERTIBLE LINE SWITCHES
These small switches allow you to choose between a iPod 2 input or a
AUX level (MP3,CD,Tape player etc...). and requrire the proper
switching.
20) AUX INPUT
When the switch is in the AUX position you may connect any AUX level
device as describle before(MP3,CD,Tape etc).
21) AUDIO OUTPUT
The output (L/R) jacks was for each system (USB and iPod) of the
units. To connect the speaker or mixer.
22) POWER
Press the power switch to turn the unit on. To switch the power off.
press the power switch again.
23) DC IN
Use this cable to connect the AC mains power to the unit.
D

FEATURES
• 2 Channl:Dual iPod socket
•Forward/Reverse/play/pause Control
• 3 band Equalizer
• Gain/Volume control per channel
• Master level control
• Stereo output 2RCA
•AUX input 2RCA
• Microphone input with gain, tone control
•Headphone jacket
•CUE, CUE level control
• LED Indicator power and USB play
• External power supply.
• Size:8.26”*8.26”*2”
•AC adapter:110V-115V~60Hz
Output:9V~60Hz
WARNING:CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE WILL VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.ANY CHANGE TO
THE EQUIPMENT WILL VOID FCC GRANT.
CAUTION:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR CORDS. IF THIS HAPPENS,BE SURE
P WER TO THE ELECTRICAL OUTLET IS TURNED OFF BEFORE YOU TOUCH
OR UNPLUG THE APPLIANCE.
O