Pyle Sports PSWBT7PN User manual

Waterproof Bluetooth USB Rechargeable Water Sport and
Swimming Headphones
PSWBT7
www.pyleaudio.com
Instruction Manual

READ THIS MANUAL CAREFULLY BEFORE USING THE BLUETOOTH HEADSET.
Congratulations on purchasing your new waterproof Bluetooth headset. To ensure optimum
performance, please follow these instructions carefully.
Before using our product for the first time, carefully read the Safety guide, warranty and operating
instructions and follow all safety precautions listed. All activities performed with this item may
only be done as described in these operating instructions; improper use of this device may cause
the user to make mistakes or decisions that could lead to serious injury or death.
IMPORTANT:
SAFETY GUIDE:
1. Do not use the Bluetooth device for purposes other than described in this manual. It can be
potentially dangerous to use your Bluetooth headset while doing other activities that require your
full attention. You should exercise extreme caution or discontinue use in potentially hazardous
situations.
2. Do not DISASSEMBLE or MODIFY the Bluetooth headset in any way. Disassembly or
modification will void the warranty.
3. Do not drop this device or subject it to excessive force. Fire or electric shock may result when
using a damaged unit.
4. Do not place the Bluetooth headset close to any heating source.
5. Do not use or store the Bluetooth headset in places with high temperatures, fluctuating
temperature changes, or strong magnetic fields.
6. To avoid accidents, DO NOT use the headset while driving or operating a vehicle, This includes
cars, motorcycles and bicycles. This is the law in some places. To avoid accidents, please do not
listen to music at high volumes while walking, especially when crossing the street as well as in
other potentially dangerous situations. Do not use the Bluetooth device in high traffic areas during
activities such as driving, jogging, riding a bicycle or in any area where an accident could occur. If
the user utilizes this unit while on the water, the user must maintain safety awareness of other
moving water crafts. Always follow the law of the country where you reside. Many countries have
laws prohibiting such actions as described above. Obey local laws. Be alert and listen carefully.
7. Do not listen to music at high volumes as it will damage your hearing and can cause permanent
hearing loss. Do not turn up the volume to block out noise around you. If you cannot hear the

sound of another person speaking when sitting opposite you, 1 meter away, then you are listening
to the music too loud. Continuous use for many hours at high volumes can cause permanent
hearing loss. In general the user must not listen to music at high volumes as this will also cause
hearing loss. Listen to earphones at a comfortable level for reasonable periods of time. Hearing
experts advise that you should NOT continuously listen to loud and extended play. Always make
sure that the Bluetooth headset volume is turned down low before putting the earphones in your
ears. If you put the earphones in your ears and then turn on the device, this may cause hearing loss
due to a sudden burst of volume. Always set the volume level to a comfortable level for listening.
Caution: the earbuds insert directly into the ear and are not to be used during scuba diving.
Prolonged exposure to pressures at depths below 1 meter may result in permanent hearing loss.
Discontinue use at first sign of pain or hearing loss.
8. Please plug or unplug the Bluetooth headset and earphones carefully as instructed.
Failure to do so will result in damage to the Bluetooth headset.
9. When you plug the USB jack into a computer or USB charger, make sure you are plugging in
the correct end. If the USB jack is plugged in the wrong way, the computer or the device might be
damaged.
10. DO NOT CONNECT THE BLUETOOTH HEADSET TO THE COMPUTER OR CHARGER
IF THE BLUETOOTH HEADSET IS WET. Doing so could result in permanent damage to the
Computer and the Bluetooth headset. This could also result in the user receiving an electric shock
or even death. Do not leave the USBjack plugged into the computer while unattended.
11. Maintain and keep the USB connection of the Bluetooth headset clean and free of dirt.
12. When the Bluetooth headset becomes dusty or dirty, wipe off with a soft cloth or clean towel.
13. Keep out of reach of children, the parts included with this product can represent a choking
hazard. This product is not for children under 6 years of age.
14. Do not use chemicals or solvents to clean the device.
SPECIFICATIONS
•IPX8 Marine Grade Rating (10 ft Depth)
•Water Resistant and Splash Proof
•Ideal for Active Sports
•Bluetooth Version: 2.1+ EDR
•Bluetooth Range: 33 Feet
•One Size Fits All Style
•Built in Microphone
•Easy to Use Push Button Controls

•Built in Rechargeable Battery
•Unit is Easily Detachable for Charging
•Unit Charges via USB Port
•Red LED Charging Indicator
•Blue LED Fully Charged Indicator
•Playback Time: Up to 6 hours
•Standby Time: 20 hours
•Temperature Range: 32° F- 176° F
•Dimensions: 1.8’’ D x 2.4’’ W x 0.8’’ H
•Weight: 32g Including Rechargeable Battery and Head phones
•Charges with Computer USB or 5V 1A USB Charger
USE THE CORRECT EAR BUDS
The earphones use exceptionally high quality driver components in order to deliver excellent
sound. The earphones are delivered with five sets of rubber earbud inserts for perfectly fitting all
ear sizes. There are three sizes for land sports two sizes for water sports. Make sure you use the
correct type for water sport activities and fit them correctly to ensure that water does not enter the
earphone channel.
IMPORTANT - READ THIS:
To ensure a watertight fit, make sure the water sport earbuds are fitted correctly onto the
earphones. Be sure to push the bud all the way back over the TWO ridges of the smaller end of the
phones until bud does not pull off easily with the hand. If water does enter the channel and covers
the waterproof membranes inside the phones the sound quality can be temporarily affected. Don't
worry; allow the earphones to air dry and the sound quality will return to normal. For best results
always insert the earphones snugly in your ears before entering the water and use the correct size
ear bud to ensure a very snug watertight fit. To get a snug fit in your ear, gently pull your ear
backwards with one hand, while inserting the earphone with the other.
OPERATING INSTRUCTIONS
The controls on the Bluetooth headset are very easy to use. First, familiarize yourself with the
controls by looking at the buttons. Then place the Bluetooth headset on your head, locate the
central button (play/pause). It is easy to adjust all the controls, volume up, volume down, jump
forward, place/pause, and on/off with one finger.
1. Press and hold >|| for 5 seconds to power on, and press >|| for 3 seconds, the red LED will blink
to pair. After first paired, the Bluetooth headset will automatically re-connect when turned on.

2. Go to your mobile phone and turn on the Bluetooth and search for the new Bluetooth device.
In the paring mode, the LED will blink red and blue. If not paired for 3 minutes, the Bluetooth
headset will power off automatically
3." BT headset" will appear on the Bluetooth list. Press to connect.
4. The LED will flash blue slowly and you can use the Bluetooth headset to call or to listen music
instead.
5. After the Bluetooth headset is connected, you can listen to the music through the headset,
and control the volume with the + or - button, or go back/forward with the >| and |< button.
6. Press >|| to pick up the phone call or press and hold for 2 seconds to reject the incoming call.
During the active phone call, press and hold for 2 seconds to finish the call.
7. Press >|| twice rapidly in succession to re-dial your last phone number.
8. The * Button is to reset or restart the Bluetooth headset.
9. You can charge the device with your computer USB port or charge using any USB charger with
a 5V 1A output. The Led will flash red when charging and will turn blue once the unit is fully
charged.
STEP 1:
The Bluetooth headset is in the closed position when you buy it. This means that the detachable
USB Bluetooth control center is attached to the center of the headset.
STEP2:
The USB Bluetooth control center is easily removed from the headset frame by bending the
headset frame carefully. Gently squeeze the headset frame together to release the USB Bluetooth
control center and remove with the other hand.
(VERY IMPORTANT: DO NOT OVERBEND THE EARFRAME, THIS WILL DAMAGE THE
INSERT OF THE USB BLUETOOTH CONTROL CENTER. BEND THE EARFRAME JUST
FAR ENOUGH, SO THAT THE USB BLUETOOTH CONTROL CENTER CAN EASILY

SLIDE OUT PAST THE HEAD FRAME IN THE DIRECTION OPPOSITE OF USB SOCKET)
STEP3:
Please plug into the USB Bluetooth control center into the computer USB port. Please make sure
it is inserted in the correct position and it is not upside down. If it is inserted in the wrong position,
the Bluetooth headset will not show up on your computer. It is shown correctly in the picture
below.
1: Connect the USB plug the correct way into your computer USB socket or other USB charger.
2. Or if using the USB cable, connect the USB connector into the USB port of your computer.
3. Charging will automatically begin. It will take up to 120-160 minutes to completely
Recharge a fully discharged battery, depending on your computer. The LED Status will flash red
while charging. The LED will become blue after fully charged.
STEP 4:
After recharging the Bluetooth headset hold the headset frame with one hand and slide USB
Bluetooth control center into USB socket located on the top of the headset frame with the other
hand.
STEP 5:
Press the USB Bluetooth control center down into the frame until it clicks tight into the frame and
creates a waterproof seal.
(WARNING: Be sure the contact points between the USB Bluetooth control center and the USB
socket are free of dirt, sand or any other debris otherwise it won't seal properly)

STEP 6:
The Bluetooth headset has been designed to be fully adjustable to fit all heads comfortably.
You may notice a "snug" fit the first time you use the Bluetooth headset. This snug fit is important
so that the Bluetooth headset will stay in place while performing active sports. However it may be
necessary to bend the earphone frame so that they are more comfortable. Do not apply excessive
force or over bend the frame as this could permanently damage it. Take your time to get the
perfect fit. Use it, and then adjust it for your comfort. The frame material is designed fit better
with use and mold to the shape of your head after multiple uses. This is the normal procedure.
STEP 7:
The frame will fit close to your head. The earphones should fit snugly in the ears and lie flat
against the ear. They should not stick out.