Pyle view PLDNV695 User manual

Do not place the unit in moist and humid conditions to avoid electric shock,
damage and fire caused by short circuit.
Disc types Content
Disc size
DVD Sound & Picture
12cm
VCD Sound & Picture
12cm
CD Sound
12cm
Sound
12cm
MPEG
MP3-4
Sound & Picture
12cm
USB Sound & Picture 12cm
Notice: This product supports VCD dis of 1.0/1.1/2.0/3.0 version

【1】…Click to select previous section(item)
【2】…Click to select next section(item)
【3】…Play/pause
【4】…Fast backward(for each click, it will fast backward at 2,4,8 and 20x).
【5】…Fast forward(for each click, it will fast forward at 2,4,8 and 20x).
【6】…Stop key( Click to stop playing; click play key again, it will play the disc from the first item).
【7】…Click the key to enter primary menu of the disc.
【8】…PIP. Click this key to enter PIP function
【9】…Repeat.
【10】…Radom. Click this key to turn to random play.
【11】…Sound track.
【12】…Click the key, DVD play information will be displayed.
【13】…Subtitles selection.
【14】…Language selection.
【15】…Click this key, the search keyboard will come out. Enter a number, then it will play the
corresponding section.
【16】…Under zoom display mode, click this key to select by moving the cursor up and down.
【17】…Press 'ZOOM' key on the remote control, the image size can be down or up. (Note: After
the image size enlarged, image position can be adjusted by pressing on remote control.)

Phenomenon Reasons Solutions
Not operating Fuse of machine power supply and auto
vehicle battery is burnt;
Voltage of power supply is overloaded;
Automatic protection system avoids fault
due to illegal operation
Change for fuse of the correct
types;
Adjust voltage;
Reset the system by pressing
the Reset key
No or low sound Disconncetion;
Volume setting is low volume;
Loudspeaker fault
Big deviation of volume balance setting;
Earthing in loudspeaker conection
Check the connection;
increase volume
Adjust the volume balance
setting to middle place;
Keep insulation of
loudspeaker connection
Remote control
doesn’t work
Battery is out of power;
Battery is not placed correctly
Change new battery;
Reinstall battery;
Inferior quality
of sound;
Distortion of
sound
Inferior disc is prohibited;
Loudspeaker does not match impedance
of the machine
Speaker fault
Use genuine discs;
Change a matched
loudspeaker;
Check the connection of
loudspeaker.
Machine reset
by itself when it
is shut down
Connection of ACC and B+ is not correct. Check and reconnect ACC and
B+
No image Connection of brake wire is not correct;
Not braking state.
Check brake wire and
connect them corerectly;
Keep braking state after the car
is placed safely.
Unstable output
of image
DVD does not correspond with the
present system video setting;
Video signal line is not connected correctly.
Adjust systerm video setting;
Check and replace video signal
line.
Image
stretching or
compressing
Incorrect ratio settings of icons Use correct ratio settings of
icons
Weak signal Auto antenna does not reach out
completely
LOC function is under working state.
Adverse antenna grounding;antenna is
Connect auto antenna line
correctly
Close LCC function