Pyle PMX462 User manual

Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]

www.PyleUSA.com2www.PyleUSA.com 3
For the best results and the satisfaction from your new unit, please read
this manualthoroughly, and retain it for future reference.
ATTENTION
To avoid the possibility of malfunction/damage to the product, damage to
data, or damage to other property, Please follow the points as below.
OPERATION AND MAINTENANCE
• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the device, TV, or radio may
generate noise.
• In order to prevent the possibility of panel disguration, unstable operation,
or damage to the internal components. Do not expose the device to excessive
dust or vibration, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day).
• Do not place vinyl, plastic or rubber objects on the device, since this might
discolor the panel.
• When cleaning the device,use a dry and soft cloth. Do not use paint thinners,
solvents, cleaning uids, or chemical impregnated wiping cloths.
• Condensation can occur in the device due to rapid, drastic changes in ambient
temperature when the device is moved from one location to another, or air
conditioner is turned on or off. For example, using the device while condensation
is present can cause damage. If there is reason to believe that condensation
might have occurred, leave the device for several hours without turning on
the power until the condensation has completely dried out.
• Avoid setting all controls to their maximum. Depending on the condition of
the connected devices, doing so may cause feedback and may damage the
speakers.
• When turning on the power in your audio system, always turn on the power
amplier LAST, to avoid speaker damage. When turning the power off, the
power amplier should be turned off FIRST for the same reason.
PRECAUTIONS WHEN USING THE USB 2.0 AND 5V DC TERMINALS
When connecting the USB2.0 connector to computer, please must abide by
following points. If not, it may cause computer crash, breakdown, or losing
data. If the computer or mixer crash, please restart the application software or
computer operating system, or disconnect the mixer, then power on again.
• Use an USB cable. USB 3.0 cable cannot be used.
• Before connecting the computer to the USB 2.0 terminal, exit from any
power-saving mode of the computer (such as suspend, sleep, standby).
3 CHANNEL MIXER
4 CHANNEL MIXER

www.PyleUSA.com4www.PyleUSA.com 5
6 CHANNEL MIXER
CHANNEL INPUT AND OUTPUT
1. [MIC/LINE] Mono input, connect the microphone, musical instrument or
audio device (CD player and so on) to the device. The sockets are supporting
both XLR and UNBALANCED 1/4" PLUG.
2. [GAlN] Controller, determines the basic volume of each channel, adjust them
for the maximum volume performance, when the volume gets too loud, the
[PEAK] LED indicator light will keep ashing.
3. [HIGH] Treble tone controller, adjust the controller to enhance or attenuate
for 15dB at 12KHz.
4. [LOW] Bass tone controller, adjust the controller to enhance or attenuate for
15dB at 80Hz.
5. [FX] Controller, adjust the signal level from the channel to the reverberation
line. Please note, the signal level will vary with the different setting of the
channel attenuator. lf using the stereo channel, will mix the signals from L
and A channels, then send it to reverberation line.
6. [PEAK] LED indicator light, when the volume of input signal or volume after
adjusting equalizer is too high, the LED indicator light will keep ashing, please
rotate the [GAIN] CONTROLLER counterclockwise to turn down the volume.
7. [LEVEL] Controller, adjust to balance the volume of each channels.
8. [STEREO INPUT] Jacks, for connecting to line level device (e.g. electric
keyboard) via 6.35 plugs, if only connect to L (MONO) jack, the mixer will
send out the same mono signal to L and R outputs.
9. [AUX IN] 3.5mm jack, this is an auxiliary input, exible connectivity for a
variety of external devices.
10. [MAIN OUT] Output, connect the active speaker or amplier.
11. [SUB OUT] Control to send the audio signal to SUB output for monitoring
and recording.
12. [PHONES] Jack, connect with 3.5mm earphones, the socket is supporting
stereo phone plug.
13. [PHONES] Jack, connect with 6.35 earphones, the socket is supporting
stereo phone plug.
14. [POWER] Button, power ON/OFF the mixer.
15. [CH/USB] Convert switch, select the input signal from "channel" or "USB".
16. [+48V PHANTOM POWER] Button/LED, when the button is turned ON, the
LED light is on, provide DC+48V phantom power to XLR plug on MIC mono
input. Please turn on this button when using the condenser microphone
which is powered by a phantom power.
17. [MAIN LEVEL] Fader, adjust the overall volume from [MAIN OUT] output
signal.
18. [SUB] Fader, control the volume of SUB output.
19. [PHONES LEVEL] Earphone controller, adjust the volume of earphone.
20. [DSP Select] You can choose to assign one of 16 effect programs to your mix.
(Hall, Room, Reverb etc. see the effect list on page 6).
21. [DELAY] Controller, adjust the depth ofthe reverberation.
22. [PARAMETER CONTROL IN ADDING DIGITAL EFFECTS] Used to adjust the
depth of the selected effect, speed, etc.
23. [FX] Controller, adjust the volume of effect.
24. [POWER INDICATOR] The indicators light up when the mixer's power is on.
25. [LEVEL INDICATORS] Show the signal level from [MAIN OUT] out. Adjust
the [LEVEL] controller to lower the level if [PEAK] indicator light up in RED.
26. [MP3 FUNCTION INTRODUCTION]
A. WIRELESS BT CONNECTION
• Press the "MODE" button in order to select the wireles BT mode, the BT
icon on display is ashing and displays BT.

www.PyleUSA.com6www.PyleUSA.com 7
• Open the BT for pairing, after successful pairing, there will be a sound prompt.
B. BUTTON FUNCTION
• " /SET" button, press rst time to pause the playing song, press again to
continue playing.
• " /-" button, short press to play the previous song, press and hold to
reduce the input volume.
• " /+"button, short press to play the next song, press and hold to
increase the input volume.
• [MODE] Selecting button, switching the functional model, select USB,
REC, BT in order.
C. USB RECORDING OPERATION
• Press the "MODE" key to select the REC state.
• Press the “ /REC” button to start recording, the LED screen shows the
recording time. Press the “ /REC” button again to pause the recording.
• Press the"MODE" key back out the recording.
D. COMPUTER SOUND CARD
When the computer data cable is connected, it will enter to PC playing
states automatically (The computer will install the driver automatically at
the rst connection, need to wait until the installation is nished to play
or record)
E. EQ control key, there are 6 kinds of sound effects.
(Normal/Rock/Pop/CIassic/Jazz/Country)
BUILT-IN DSP
You can choose to assign one of 16 eect programs to your mix.
Eects List as below:
USB FOR DATA TRANSFER AND RECORD, AND POWER SUPPLY
USB FOR POWER SUPPLY ONLY
Connect with PC USB port, Power bank or power socket to supply power to
mixer. It must meet the following requirements:
Output voltage: 4. BV to 5. 2V
Output Current: 1A or even more

www.PyleUSA.com8www.PyleUSA.com 9
PMX462
3-Channel Audio Mixer with USB Interface
Built-in FX Processor MP3 Player, XLR & 6.35 Jack Connectors
Features:
• Rugged, Metal Chassis & Exquisite Panel on 2 Sides
• Preset 16 Digital Effects
• Built-in SUB Output, EQ Control for MP3 Player
• Can Choose 6 Kinds of Sound Effects Normal/ Rock/ POP/ Classical/ Jazz/
Country)
• Flexible Connectivity for a Variety of External Devices
• Ultra-Low Noise Design with High Headroom
• Integrated Sound Card for Computer Recording Support
• USB Interface: Connect to Mac / PC
• Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
• Extremely Musical 2-Band EQ & Pan, on Each Channel
• Combo Microphone Jack Connector – XLR and 6.35 Jack
• Voice Echo Effect/Delay Features
• Audio Signal CLIP LED Indicator Lights
• Input Selection / Control Buttons
• Independent Channel + MASTER Volume Controls
• Independent Channel Balance/High + Low-Frequency Adjustment
• Universal Digital Audio File Compatibility
What’s in the Box:
• Mixer Interface
• USB Cable
• Wall Adapter
Technical Specs:
• Power Supply: DC 5V/1A
• Phantom Power: +48V
• Frequency Range: 20Hz-20KHZ±1dB+4dBμ@1KHZv
• T.H.D.: ≤0.5%@+4dBμ (22HZ-22KHZ)
• EQ Range: Bass ±15dB/80Hz, High ±15dB/12kHz
• USB Interface: SB 2.0, Windows 98SE+, Mac OS
• Power Supply: USB, DC 5V/1A
• Dimensions (L x W x H): 9.06’’ x 9.06’’ x 2.17’’ -inches

www.PyleUSA.com10 www.PyleUSA.com 11
PMX466
6-Channel Audio Mixer w/ Recording Interface
Built-in Multi-FX Processor/AUX Input & MP3 Player, 4 XLR I/O Connectors
Features:
• Rugged, Metal Chassis & Exquisite Panel on 2 Sides
• Preset 16 Digital Effects
• Built-in SUB Output, EQ Control for MP3 Player
• Can Choose 6 Kinds of Sound Effects Normal/ Rock/ POP/ Classical/ Jazz/
Country)
• Flexible Connectivity for a Variety of External Devices
• Ultra-Low Noise Design with High Headroom
• Integrated Sound Card for Computer Recording Support
• USB Interface: Connect to Mac / PC
• Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
• Extremely Musical 2-Band EQ & Pan, on Each Channel
• Combo Microphone Jack Connector – XLR and 6.35 Jack
• 4 XLR+6.35 JACK (L/R) Stereo Input and Output Connectors
• Voice Echo Effect/Delay Features
• Audio Signal CLIP LED Indicator Lights
• Input Selection / Control Buttons
• Independent Channel + MASTER Volume Controls
• Independent Channel Balance/High + Low-Frequency Adjustment
• Universal Digital Audio File Compatibility
What’s in the Box:
• Mixer Interface
• USB Cable
• Wall Adapter
Technical Specs:
• Power Supply: DC 5V/1A
• Phantom Power: +48V
• Frequency Range: 20Hz-20KHZ±1dB+4dBμ@1KHZ
• T.H.D.: ≤0.5%@+4dBμ (22HZ-22KHZ)
• EQ Range: Bass ±15dB/80Hz, High ±15dB/12kHz
• USB Interface: SB 2.0, Windows 98SE+, Macc OS
• Power Supply: USB, DC 5V/1A
• Dimensions (L x W x H): 11.22’’ x 9.06’’ x 2.17’’ -inches
PMX464
4-Channel Audio Mixer w/ Recording Interface
Built-in FX Processor/AUX Input & MP3 Player, 2 XLR I/O Connectors
Features:
• Preset 16 Digital Effects
• Built-in SUB Output, EQ Control for MP3 Player
• Can Choose 6 Kinds of Sound Effects Normal/ Rock/ POP/ Classical/ Jazz/
Country)
• Flexible Connectivity for a Variety of External Devices
• Ultra-Low Noise Design with High Headroom
• Integrated Sound Card for Computer Recording Support
• USB Interface: Connect to Mac / PC
• Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
• Extremely Musical 2-Band EQ & Pan, on Each Channel
• Combo Microphone Jack Connector – XLR and 6.35 Jack
• 2 XLR+6.35 JACK (L/R) Stereo Input and Output Connectors
• Voice Echo Effect/Delay Features
• Audio Signal CLIP LED Indicator Lights
• Input Selection / Control Buttons
• Independent Channel + MASTER Volume Controls
• Independent Channel Balance/High + Low-Frequency Adjustment
• Universal Digital Audio File Compatibility
What’s in the Box:
• Mixer Interface
• USB Cable
• Wall Adapter
Technical Specs:
• Power Supply: DC 5V/1A
• Phantom Power: +48V
• Frequency Range: 20Hz-20KHZ±1dB+4dBμ@1KHZ
• T.H.D.: ≤0.5%@+4dBμ (22HZ-22KHZ)
• EQ Range: Bass ±15dB/80Hz, High ±15dB/12kHz
• USB Interface: SB 2.0, Windows 98SE+, Macc OS
• Power Supply: USB, DC 5V/1A
• Dimensions (L x W x H): 9.06’’ x 9.06’’ x 2.17’’ -inches