Pyle PWMA200 User manual

WIRELESS RECHARGEABLE
PORTABLE AMPLIFIER
USER'S MANUAL

We thank you for your purchasing this amplifier system. Before
start to use this amplifier system
l
please read the manual book
thoroughly and carefully.
Please keep this instruction book in a safe place after reading for
future reference.
WARNING
• To preventfire or shock hazard, do notexpose the unitto rain or moisture.
• Dangerously high voltages are present inside the unit. Do notopen the casing
of the unit. Referservicing to qualified personnel only.
• Recharge the built-in
12V DC rechargeable battery before any use ofthe unit.
•
To preventthe rechargeable batteryfrom being damaged, make sure thatthe
power ON/OFF switch of the PAsystem is turned off aftereach use.
• All
in one design foreasy carrying and portable use.
• Uni-directional Lavaliermicrophone with high sensitivityforclearlyvoice
transmission and receiving.
• Quartz stabilizerforcarrierfrequencytransmission to avoid interference.
• The system works on both
AC and DC.You can also use the built in rechargeable
battery
or with carcigarette lighterpowerfor 12VDC.(The powercord forcar
is not included, call us foroptional purchase)
• Amplifierworking in VHF band and there are 98 different possible channels
readyformaxa group
of 98 amplifiers working at the same place and same
Time.
• SMTtechnology and SMD electronic components used
in building this amplifier,
sothe quality is very stable and last long.
• 3 styles
of microphones are good fordifferent purposes. You can usethe
handheld mic, headset micand Lavalier mic
altematively.
• Tone control.
• Wired/wieless microphone
• Aux inputforconnecting to MD/CD etc.
• 9Vcommon battery
or 8AV rechargeable battery can
be used
in the wireless handheld microphone and the
wireless transmitter.
•
FM Radio Function.
Meeing

This unique designed amplifier speaker system with microphone is perfect for
the followimg applications.
• Used as lecturing amplifierindoor
or outdoor.(Especialiyfor dancing and gym
teachers}.
• A perfectaddress delivery system for
in and outdoormeeting, tourism and
churches.
• It is a good amplifierfor interpretation, class teaching and commercial vendor
demonstrations.
With this amplifiersystem, you can make yourselfa clearsound and heard
from far!
Classroom teaching
Game

PWMA200
(single channel main frame) standard match
1. One set of main frame.
2. Apiece of Lavalierwireless MIG with transmitter
3. One headset MIG.
4.Wired microphone
Note: I.Lavalier or handheld wireless microphones for custome~s
optional.
2.The same channel microphones can't work at the same
time in single channel receiver.
Operation of the system
System operation on AC Po~
1. Plug in theAG powerto the poweroutletfrom a powersource. Make sure
you are using the correctvoltagewhen you plug in the system toAC
power.
2. Switch the main powerON, the LED on the bodywill be lit. After using the
sytem, make sure to turn the main poweroffto avoid the batterybuilt-in damaged.
3. When theAG powersuddently cut off, the built-in batterywill powerthe system
to workin DG powernodelay.
4. Fully hang up the antenna
of the main frame to achieve the widest service
range
of the wireless MIG, or to getlhe best result of radio. If the main receiver
meets the same or similar channel strong interference of the wireless electric
wave,
it occurs the noisy voice or interuption phenomenon. At this time, adjust
the antenna to reduce or deletethe interference.
5. Adjustlhe Volumewith the control knob to getlhe perfect sound.

The system
.-
FM TURNING
speaker
PWMA200 Single channel main frame(With
Built-in Rechargeable battery)
Radio Tuning FM
(optional)
Audio Output
-
[]][!]
Wired MicInput Battery
status LED
Wired microphone
volume control power
Belt Pack Transmitter
Headset Microphone
PWMA200 Single channel MAIN
FRAME(Built-in Rechargeable
batteryand with FM)
Handheld Wireless MIC

You have to plug the system off the main power after each use.
System works on DC p-ower..
1.Turn on the main switch to ON and the power LED will indicate the battery
works well.
2.You may use the carcigarette light power connector
to connect the car and the main receiving machine
or use
an external 12VDC power connectorto
connect the main receiving machine
and the external
12V battery to supply powersource to the main
receiving machine.
Warning:After use it,please make sure to switch
the main power to OFF to avoid battery damaged.
"tiI·'"7 ,'0
output
Connector
The replacement of AC power and recharged is needed in case of
"-- __ ---' weak built-in batteries power and occurrence ofnoises and interruption
of voice while using DC built-in batteries power.
Warning: Be sure
to switch off thesystem main power afteruse,otherwise
the
battery will be over discharged and it can damage the Lead
Acid rechargeable battery and shorten the battery life
dramatically.
How to use the Lavalier MicroRtione
1. Open the battery compartment by sliding up the cover.
2. Put the battery into the compartmentwith correct polaritY,and close the cover.
3. Plug the Lavalier microphone part to the jack.
4. Switch on the power of the transmitter and when the LED shows,it is ready
to work.

5. Be careful to adjust the main control of the transmitter, startfrom least volume
and slowly turn itto a appropriate level to hearyourvoice clearly and with feed
back. The system is ready to use.
6. Afteruse, you have to take the battery out of the transmitterto avoid battery
leaking to damage the transmitter.
~
VOI~me ..•. --~ YO" "'" ,etthe batte, U
MIG PoNerLED. ":~... sound effect from the
PoNer SVJilch nearer distance
MIC pat between the
microphone and your
o 'mouth.
Cover ~
cover4)0 ·
• i
9V batteIy Chamber ~ I
LavalierWirelesstransmitter Lavalier Wireless MIC Belt packstyle
Headset MIC
1. Open the battery cover.
2. Put the battery into the compartment and
make sure you have a right polarity before
you use
it.
3. Turn the switch to ON and you can use the
microphone now.
4. Please take the batteryout ifyou are notgoing
to use itfor a period oftime. Don't
putthe microphone directiy towards
the horn ofthe main receiver in near distance,
or it will occurscreaming feedback.
If the LED flash up, it shows the battery is good to use. If the
LED is on, it shows that the battery is low, you have to change
the battery before you can use the system. If the LED does not
flash and not on,if shows thw battery is dead or polarities are
wrong.
Indicator 9V Battery
MIC. net head
I Hoi er
Ba~se
52-L ______ ....JJl="---' ~en
Battery
Switch
Handheld wireless MIC

Howto use a wired
Just plug the microphone to the wired mic inputjack,
you hearyourvoice immediately.
How to adjust ttie q
VOlum',.wntroliJ ~~~'"
- -=J ' .
You mayturn the Tone knob to its best position foryour satisfactory.
Audio output will go to the recording
system and you can record while
using the amplifiersystem.
How to use the Aux
Connectthe cable of the CD/MD etc into theAux
InputJackto getthe musicsound amplifying.
Adjust the volume depend on your requirement.
How to adjust the volume
Wrreless receIVIng
\,------- Inputmusic volume control
r-"--=--"~~+-ti>,. -f·~=_ ~ lI=. '0=- =;--®
CDIMDIETC
The speakervolume control will adjust the amplifiervolume to its best sound level.
How to use the multiply'
In orderto multiplyvolume, a ortwo wireless microphones with several wireless
amplifiers
of the same frequency can be applied to receive simultaneously in
circumstances of large hall orstadium for hundreds or thousands of persons.
How to charge the 9V batte~?
Open the battery compartment on the back of the system case.
Make sure you have right polarity to put the battery into the compartment.

1. Tum the main poweron, then adjustthe speakervolume to a properlevel.
2.
TUrn the FM radio to your station. Itcovers 88-108 MHz.
3. Adjust the volume to a propersound level.
How to charge the batte~ built in?
1. It is recommended to charge the battery for the first time use for 8 hours.
2. Turn the main switch to "Charge" and the built-in batterywill be charged with a
consistent current and voltage.
3. The charging indicatorwill change to from brightto dim with the batterycharging,
the LED will die
of when the batteryis fully charged. When the battery is getting
low, you will heara buzz rominderfrom the system, asking you to charge the
battery immediately. Recharge the batteryover8 hours before you aregoing to
use it. When it is full charged over8 hours, it can operate
for 6 hours.
1.
If the battery is over discharged, the LED will not work till the
battery is rejuvenated. When the voltage is lessthan 100V, the
"CHARGE LED" will
not light. When thevoltage is more than
120V, "CHARGE LED" will keep lightand it is normal. You have
to charge the batterywhen the built-in alarm warns you to
charge the battery.
2. If you do not use system for 90 days, we recommend charging
the system everythree months over 8 hours.
Trouble shooting
If you have any problem with thesystem, please checkthe main powerand
batteries
for microphone sets and rechargeable batterybuilt-in. If you are using
a new
9V battery, please makesure you have put it in a correct polarity.
Forthe following problems:
Screaming from the speaker
1. Please adjustthespeakervolume to the minimum.
2. Adjust the transmittervolume control to a lowlevel.
3. Changethe speakerdirection to avoid directfeedback.
4. Turn theTONE to the lowestlevel.
When you lowthe volume to a level that nofeedback can be heard.

Noise or abruptstop
1. Checkthe accumulatorto see if it is low in voltage.
2. Built-in battery low, please useAC power instead to powerthe system.
3. Checkthe cable connection to the speaker. The cable might be broken aftera
long time use.
4. Possible frequency interference with local transmission. Please contact the
dealer to change channels for better reception.
No voice heard
1. One of the powers is notturned, please checkall powersource and make
sure they are all on.
2. The volume control knobs are turned to lowest level. Make sure theyare
proper in sound.
3. Lavaliere cables are broken after a long time use.
Take outthe 9V battery to avoid its
acid damaging the components
of
the transmitter if you are not going
to use
itfor a period oftime.
Technical specifications
CAUTION:
Warning: Don't dismantle this product.
The maintenance and inspection should
be carried out by a qualified technician
to avoid the risk of electric shock and
damaging the components.
Power: AC 110V 50Hz;DC 12V/l.2AH
(built-in rechargeable battery;)
External DC power:
12V/lA
Speaker:
16CM,10W/4Q
Frequency Range: VHF 160-270MHz
Sensitivity:
10dB/~ V (S/N:>60dB)
Oscillationg Mode: ±O.005% quartzcontrol phase locked
Wireless effective range:
UP TO 100FT
Dimension:
Peak power:
Output power:
lBOX300X 100MM
BOW max
20W
We reserve the right of changing technology and speCifications of ourproducts
without notice in advance.

Options of accessories
Lavalier Microphone
Belt Pack Transmitter
(]
9V battery
12V/1.2AH
Built-in battery
Headset Microphone
Wired Microphone

AMPLIFIER
Output power: BOW(MAX)
Frequency Range: 1BO-270MHz
SIN: BOdB
Powersupply: AC110V BOHz
DC 12V-15V
Output Impedance:
BOO 0
Effective Distance: UPTO 100FT
TRANSMITTER
Frequency Range: 1BO-270MHz
Dynamic Range:
BOdB
Frequency Response: 100-10KHz
Working Temperature: -10"C
-45"C
Powersupply: 9V battery
Battery life: B-10 hours

" 100%recycled paper
L~ 1 00% paplerrecycle
PLEASE APPROPR~TE TAKE CARE OF
www.pyleaudio.com