- 10 -
SAFE OPERATION
BEFORE USE
A. After unpacking and prior to use, Pyrolino must be positioned correctly on a secure level
base. Avoid using Pyrolino when it’s windy, because it can cause instability.
B. Ensure that no combustible materials, inflammable substances or explosive objects are
kept in a distance smaller than 2 meters (6.6 ft.) from the Stove.
C. Wait 2 –5 minutes for Pyrolino to maintain a stable flame. Do not cook before the fuel has
a coating of ash to prevent smoke production and discoloring of the utensils.
DURING USE
A. While in use & immediately after use, do not touch the stove as it gets very hot.
B. Do not leave the stove unattended. Close supervision is necessary when Pyrolino is on use.
C. Adjust the flame density controller (- +) accordingly, depending on the type of fuel you
use. The flame density controller adjusts the amount of air supply into Pyrolino’s
combustion chamber, thus controlling the density of the flame. Reaching (+) supplies
Pyrolino with more air, while (–) supplies with less air. Typically, denser fuel (ex. corn)
requires more air to start burning and reach maximum efficiency.
D. Use small or medium size cookware. The metal base can accommodate up to 5 kg (11 lbs.)
of weight.
E. Ensure the cookware is stable when in use.
F. At the end of the combustion cycle, Pyrolino starts burning the remaining coal, produced
from the first phase of natural combustion. As a result, the flame will gradually become
blue. This is an indicator of the CO combustion.
G. Always wait Pyrolino to cool down first, before refilling. Do not refill while Pyrolino is on
use.
AFTER USE
A. Before cleaning, wait for Pyrolino to cool down, and then, remove the residue.
B. Do not pour water in the stove. It causes the production of clinker and damages its
components.
C. Do not use hard scrub brush or power type cleanser as it may cause deformations on the
metal surface.
REPAIR
Never attempt to dismantle, repair or modify Pyrolino on your own. Doing so may cause
abnormal operation or result in danger. Please contact Pyrolino Customer Service to have it
addressed.