PLEASE CONTACT QUICKDRAW’S
EXPERT SUPPORT TEAM WITH ANY
QUESTIONS OR CONCERNS.
1 (800) 591-3613
Visit HoldYourFire.com for
product news & updates or to
view QuickDraw’s entire line of
vaporizers & accessories.
©2014 QD Products, LLC.
QuickDraw, and the QuickDraw
logo, are trademarks of QD
Products, LLC.
All rights reserved.
PREPPING THE QUICKDRAW 300
FAST CHARGING
To fully charge the QuickDraw 300 before use, attach the mag-
netic charger tip to the end of the device & insert the cord into a
USB port. Both the LED Ring and Indicator Ring will flash white
to signal charging. The Indicator Ring will turn red intermittently
while charging, and will turn green when the device is fully charged.
• LED Ring & Indicator Ring will flash white twice to signal a
recharge is needed.
• The QuickDraw 300 is specifically designed to allow use
while charging.
UNLOCKING THE QUICKDRAW 300
The QuickDraw 300 is equipped with a 3-click battery lock to pre-
vent unintentional activation. Pressing the heating button 3 times
rapidly will unlock the device for use, which the Indicator Ring will
signify by flashing white.
To lock the QuickDraw 300, press the heating button rapidly in
the same fashion. The Indicator Ring will flash red to signal the
device is locked.
EXTRACT
• Unscrew mouthpiece from cartridge body
• Place extract in chamber, below overflow line
• Reattach mouthpiece & slide cartridge into vaporizer chassis
• Unlock QuickDraw 300
• Press & hold button as you draw
• QuickDraw 300 will auto-deactivate after 30 seconds to
prevent undesired use
CARTRIDGE PREPARATION & USE
DRY
• Remove mouthpiece from cartridge body
• Place shredded dry herb loosely in chamber, below white
chamber wall
• Replace mouthpiece & slide cartridge into vaporizer chassis
• Unlock QuickDraw 300
• Press & hold button for 3 seconds to begin precision-heating
• QuickDraw 300’s LED Ring will glow green when ready for use
• Draw from mouthpiece, without pressing or holding button
• Press and hold button for 3 seconds to deactivate
• QuickDraw 300 will auto-deactivate after 2 minutes to prevent
undesired use
LIQUID
• Unscrew mouthpiece from cartridge body
• Fill chamber with liquid, below overflow line
• While filling, hold cartridge at an angle to prevent liquid from
entering central vapor path
• Reattach mouthpiece & slide cartridge into vaporizer chassis
• Unlock QuickDraw 300
• Press & hold button as you draw
• If held for longer than 10 seconds, QuickDraw 300’s LED Ring
will flash before device shuts down, preventing undesired use
Unpack & fully
charge device.
Replace mouth-
piece & slide
cartridge into
vaporizer chassis.
1 2
43
CARTRIDGE MAINTENANCE
The QuickDraw 300 comes equipped with a kit of cleaning and
maintenance tools that should be used regularly to clear the device
and its cartridges of debris. Regular cleaning will ensure long
cartridge life.
Unscrew cartridge
mouthpiece and fill
chamber.
Press heating
button 3 times
rapidly to unlock
device for use.
