Qlogic SANblade 2300 Series User manual

[Quick Start Guide ]
QUICK START GUIDE
z
2300, 2400, 2500 SERIES ADAPTER INSTALLATION

Purchasers of OEM products should consult with the OEM for support.
Please feel free to contact your QLogic approved reseller or QLogic Technical Support at
any phase of integration for assistance. QLogic Technical Support can be reached by the
following methods:
Web http://support.qlogic.com
E-mail [e-mail]
The QLogic knowledge database contains troubleshooting information for the QLogic host
bus adapters. Access the data base from the QLogic Support Web page,
http://support.qlogic.com. Use the Support Center search engine to look for specific
troubleshooting information.
Products Affected
Product Name Part Number
QLA200 FL0210403
QLE220 EL0210402
QLA2310 FC2310401
QLA234xFC5010409
QLA24xx FC2410401
QLE2460 PX2510401
QLE2462 PX2510401
QLE2464 PX2610401
QLE2560 PX2810403
QLE2562 PX2810403
QLE2564 PX4810402

3
Quick Start Guide
Installation Instructions
This Quick Start Guide describes how to install and configure your new QLogic host bus adapter in four simple steps:
■Step 1. Verify the Package Contents.
■Step 2. Install the Adapter Hardware.
■Step 3. Install the Adapter Driver
■Step 4. Install QConvergeConsole™.
Keep the adapter in the antistatic bag until installation. The host bus adapter contains parts that can be damaged
by electrostatic discharge (ESD). Before handling the host bus adapter, use standard methods to discharge static
electricity. Place the host bus adapter on the bag when examining it. Retain the bag for future use.
Step 1. Verify the Package Contents
The QLogic host bus adapter is shipped with the following items:
■QLogic adapter
■Low-profile bracket (not available in all models)
For QLE25xx adapter low-profile bracket installation
instructions, go to http://driverdownloads.qlogic.com. Click
the plus sign (+) next to QLogic Products. In the table that
appears, select Fibre Channel Adapters. In the second
column, select the appropriate adapter. In the third column,
select your operating system. Click the Go button.
Installation instructions are in the Documentation section.
Step 2. Install the Adapter Hardware
To install the adapter hardware, you need to open the computer and locate the appropriate bus slot. If necessary, consult
your computer system manual for instructions to remove the computer cover.
Follow these steps to install the adapter hardware:
1. Power off the computer and all attached devices such as monitors, printers, and external components.
2. Disconnect the power cable.
3. Remove the computer cover and find an appropriate empty bus slot.
4. Pull out the slot cover (if any) by removing the screw or releasing the lever.
5. Install the low-profile bracket (if required).
6. Grasp the adapter by the top edge and seat it firmly into the appropriate slot (see Figure 1).
7. Refasten the adapter’s retaining bracket using the existing screw or lever.
8. Close the computer cover.
CAUTION!

4
9. Plug the Fibre Channel cable into the adapter.
10. Plug in the power cable and turn on the computer.
Figure 1. Illustration of Server Motherboard and Slots
Step 3. Install the Adapter Driver
To install the adapter driver:
1. Go to the QLogic Driver Downloads/Documentation page at http://driverdownloads.qlogic.com.
2. Click QLogic Products.
3. From the table at the bottom of the page, select Fibre Channel Adapters, the appropriate adapter
model, and your operating system, and then click Go. The product download page opens.
4. On the download page under Drivers, select the appropriate driver and download it to your system.
5. Follow the instructions in the driver readme file for installing the downloaded driver.
Step 4. Install QConvergeConsole™
To install the QConvergeConsole web management interface:
1. Go to the QLogic Driver Downloads/Documentation page at: http://driverdownloads.qlogic.com.
2. Click QLogic Products.
3. From the table at the bottom of the page, select Fibre Channel Adapters, the appropriate adapter
model, and your operating system, and then click Go. The product download page opens.
4. On the download page under Management Tools, select QConvergeConsole and download it to your
system.
5. Follow the instructions in the QConvergeConsole readme file for installing the downloaded software.
ADAPTER RETAINING
BRACKET
LEVER
SLOT COVERS
SYSTEM
CHASSIS
64-BIT PCI-X SLOT
x4 PCI EXPRESS SLOT
(x8 PHYSICAL SLOT OR
ABOVE REQUIRED FOR
QLE25xx ADAPTERS)
SCREW
HOST BUS ADAPTER
OR

5
Additional Resources
■To obtain the most current drivers, management tools, user instructions, and documentation, please visit the
QLogic Web site at http:\\driverdownloads.qlogic.com and download the latest versions.
■For descriptions and procedures related to QConvergeConsole, use the built-in help system.
■The following sections contain additional information about the QLogic adapter, including the LED scheme,
warranty, and laser safety information.
Adapter LEDs
Table 1. QLA2310/QLA200 Host Bus Adapter LED
Scheme
Green LED Yellow LED Activity
Off Off Power off
On On Power
On Off Online
Off On Link
Off Flashing Loss of
synchronization
Green and Yellow LEDs flashing
alternately Firmware error
Table 3. QLA24xx/QLE24xx Host Bus Adapter LED Scheme
Yellow LED Green LED Amber LED Activity
Off Off Off Power off
On On On Power on (before firmware init)
Flashing Flashing Flashing Power on (after firmware init)
Yellow, Green, and Amber LEDs flashing alternately Firmware error
Off Off On/Flashing Online, 1Gbps link / I/O activity
Off On/Flashing Off Online, 2Gbps link / I/O activity
On/Flashing Off Off Online, 4Gbps link / I/O activity
Flashing Off Flashing Beacon
Table 2. QLA234x/QLA210/QLE220 Host Bus Adapter LED
Scheme
Green LED Amber LED Activity
Off Off Power off
On On Power
On Off Online
Off On Link
Off Flashing Loss of
synchronization
Alternate
flashing Alternate flashing Firmware error
Flashing Off Beacon

6
Warranty
For warranty details, please check the QLogic Web site at http://www.qlogic.com/Support/warranty.aspx.
Laser Safety
FDA Notice
This product complies with DHHS Rules 21CFR Chapter I,Subchapter J. This product has been designed and manufactured according to
IEC60825-1 on the safety label of laser product.
Class 1 Laser Product Caution—Class 1 laser radiation when open
Appareil laser de classe 1 Do not view directly with optical instruments
Produkt der Laser Klasse 1
Luokan 1 Laserlaite Attention—Radiation laser de classe 1
Ne pas regarder directement avec des instruments optiques
Vorsicht—Laserstrahlung der Klasse 1 bei geöffneter Abdeckung
Direktes Ansehen mit optischen Instrumenten vermeiden
Varoitus—Luokan 1 lasersäteilyä, kun laite on auki
Älä katso suoraan laitteeseen käyttämällä optisia instrumentteja
Agency Certification
QLogic Adapters
The following sections contain a summary of EMC/EMI test specifications performed on the QLogic host bus adapters to comply with
radiated emission, radiated immunity, and product safety standards.
EMI and EMC Requirements
FCC Part 15 compliance: Class A (QLE236x, QLA24xx, QLA2xx, QLE2464, QLE2xx, QLE25xx), Class B (QLA23xx, QLE24xx)
FCC compliance information statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
ICES-003 compliance:Class A (QLE236x, QLA24xx, QLA2xx, QLE2xx, QLE2464, QLE25xx), Class B (QLA23xx, QLE24xx)
■For QLE236x, QLA24xx, QLA2xx, QLE2xx, QLE2464, and QLE25xx adapters: This Class A digital apparatus complies with
Canadian ICES-003.Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada.
■For QLA23xx and QLE24xx adapters: This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada.
Table 4. QLE25xx Host Bus Adapter LED Scheme
Yellow LED (8Gbps) Green LED (4Gbps) Amber LED (2Gbps) Activity
Off Off Off Power off
On On On Power on (before firmware init)
Flashing Flashing Flashing Power on (after firmware init)
Yellow, Green, and Amber LEDs flashing alternately Firmware error
Off Off On/Flashing Online, 2Gbps link / I/O activity
Off On/Flashing Off Online, 4Gbps link / I/O activity
On/Flashing Off Off Online, 8Gbps link / I/O activity
Flashing Off Flashing Beacon
CLASS I LASER

7
CE Mark 89/336/EEC EMC Directive compliance:
EN55022:1998/CISPR22:1997 - Class A (QLE236x, QLA2440, QLA246x, QLA2xx, QLE2xx, QLE2464, QLE25xx)
Class B (QLA23xx, QLE2440, QLE246x)
EN55024:1998
Immunity Standards
EN61000-4-2 : ESD
EN61000-4-3 : RF Electro Magnetic Field
EN61000-4-4 : Fast Transient/Burst
EN61000-4-5 : Fast Surge Common/ Differential
EN61000-4-6 : RF Conducted Susceptibility
EN61000-4-8 : Power Frequency Magnetic Filed
EN61000-4-11: Voltage Dips and Interrupt
EN61000-3-2 : Harmonic Current Emission
EN61000-3-3 : Voltage Fluctuation and Flicker
VCCI compliance: Class A (QLE236x, QLA2440, QLA246x, QLE2xx, QLE2464, QLE25xx), Class B (QLA23xx, QLE2440, QLE246x, QLA2xx)
AS/NZS CISPR22 compliance:Class A (QLE236x, QLA2440, QLA246x, QLA2xx, QLE2xx, QLE2464, QLE25xx), Class B (QLA23xx, QLE2440,
QLE246x)
CNS 13438 compliance: Class A (QLE236x, QLA2440, QLA246x, QLE2464, QLE25xx), Class B (QLA23xx, QLE2440, QLE246x)
■For QLE236x, QLA2440, QLA246x, and QLE2464 adapters
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case, the user may
be required to take adequate measures.
MIC compliance:Class A (QLA2310F, QLA2340, QLA2342, QLE236x, QLA24xx, QLE2xx, QLE2464, QLE25xx)
Class B (QLE24xx, QLA2xx)
■For QLA2310F, QLA2340, QLA2342, QLE236x,QLA24xx, QLE2xx, QLE2464, and QLE25xx host bus adapters: Korea MIC Class
A Certified
Product Name/Model Fibre Channel host bus adapter
Certification holder QLogic Corporation
Manufactured date Refer to date code listed on product
Manufacturer/Country of origin QLogic Corporation/USA
■Korean Language Format— Class A
A class equipment
(Business purpose info/telecommunications
equipment)
As this equipment has undergone EMC registration for business
purpose, the seller and/or the buyer is asked to beware of this point
and in case a wrongful sale or purchase has been made, it is asked
that a change to household use be made.

8
■For QLE24xx and QLA2xx adapters: Korea MIC Class B Certified
Product Name/Model Fibre Channel host bus adapter
Certification holder QLogic Corporation
Manufactured date Refer to date code listed on product
Manufacturer/Country of origin QLogic Corporation/USA
■Korean Language Format— Class B
Product Safety Compliance
UL, cUL product safety compliance: QLA23xx, QLE236x, QLA24xx, QLE24xx, QLA2xx, QLE2xx, QLE2464, QLE25xx
UL60950
CSA C22.2 No.60950
Class 1 Laser Product per DHHS 21CFR (J)
Complies with 21 CFR 1040.10 and 1040.11
Use only with listed ITE or equivalent.
73/23/ECC low voltage directive: QLA23xx, QLE236x, QLA24xx, QLE24xx, QLA2xx, QLE2xx, QLE2464, QLE25xx
TUV:
-EN60950-1:2001
-EN60825-1:1994+A1+A2
-EN60825-2:1994+A
B class equipment
(Household purpose info/telecommunications
equipment)
As this equipment has undergone EMC registration for
household purpose, this product can be used in any area
including residential area.

9

10

© 2005–2011 QLogic Corporation. QLogic, the QLogic logo, and QConvergeConsole are trademarks or registered
trademarks of QLogic Corporation. All other brands and product names are trademarks or registered trademarks of their
respective owners. Information supplied by QLogic is believed to be accurate and reliable. QLogic Corporation assumes
no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to make changes
in product design or specifications.

*FC0054505-01 A*
FC0054505-01 A
Corporate Headquarters International Offices
QLogic Corporation UK | Ireland | Germany | France
26650 Aliso Viejo Parkway India | Japan | China
Aliso Viejo, CA 92656 Hong Kong | Singapore | Taiwan
949.389.6000 www.qlogic.com