Use only the power supply and voltage indicated on the label.
A three-prong power cord is included. Confirm that the ground terminal of the wall outlet is
well grounded before installation. Route the power cord away from passageways to avoid
treading; also keep away from areas where the power cord may get pressed.
Do not overload the power outlet, and use a certified power outlet.
In case of thunderstorms, please pull out the power plug and the network cable and
disconnect the product from the antenna to avoid damage.
If it is to be left unused for a long period of time, please power it off and pull out the power
plug.
In case of any abnormal sound or smell, please power it off immediately and pull out the
power plug. If necessary, stop using it and contact the maintenance personnel as soon as
possible.
Keep away from flammable and explosive materials (e.g., candle, electric stove, bulb).
Be careful to prevent any liquid or metal objects from entering into the product; if so, stop
using it immediately and contact the maintenance personnel.
When it is moved from a low-temperature environment to a warm area, condensate may
form inside it. In such case, the product should be placed still for at least h prior to restart
to air-dry the condensate.
Handle it with at least two persons; avoid impact and pay special attention to the display
screen during the transfer.
To avoid injury, please install the base according to the instructions, and then place the
product on an even and steady ground; or, if the base is not installed, the product should be
firmly fixed to a wall according to the wall-mount bracket installation instructions.
Do not place the product in any environment:
In order to avoid the risk of explosion, do not expose the batteries to sunlight, fire or
hightemperature.
.
.
.
.
.
.
.
.
.
.
.
.
.
Do not attempt to disassemble/assemble this product as you may get exposed to
dangerous voltage or other hazards. If necessary, please contact the maintenance
personnel.
If the product is dirty, first disconnect the power plug, then dampen the cloth with water
and wipe with the slightly wet cloth. Do not apply force while wiping the display screen as it
may scratch the screen. Do not wipe with such solvents as alcohol, gasoline, acid, alkali,
detergent, volatile oil and diluents since these solvents may damage the product.
Condensate may appear inside the screen in high humidity, and this is a normal
phenomenon as generally temperature difference between the external and internal glass
surfaces may lead to water droplets on the internal glass surface. Such water droplets will
disappear automatically after h of normal use. Please rest assured to use the product.
Do not insert any sharp or metal object into the vent or touch the signal connector with any
sharp or metal object; otherwise short circuit or electric shock can be caused.
Do not exert pressure on the LCD screen as it is made of glass.
