QTX Light 151.573 User manual

USER MANUAL
LED RGB MUSHROOM
151.573

User Manual 151.573
2
151.573 LED RGB Mushroom
Please read this manual before your use and keep it for your future reference.
Note
OPERATING TEMPERATURE < 40 degrees C
HUMIDITY <95%
Operating the fixture above these values will shorten its lifespan
Indoor use only
Caution
Do not connect the power when the fixture is still in the box.
Do not connect the power before the installation. The fixture must be earthed.
If you find a problem with this fixture, please return to your supplier for repair. Do not open
the fixture by yourself, there are no user serviceable parts inside
Check input voltage before connecting this fixture.
Operation Instruction
This user manual is for use with the QTX Light LED Mushroom RGB Light Effect
It uses high power LED’s to make the colorful effect. The two operating functions are
Sound and Auto. In sound mode, the various effects will be controlled by the Sound
Potentiometer. In Auto mode this fixture will be running automatically.

User Manual 151.573
3
Power
These light effects also have an IEC power mode daisy chain facility allowing you to run up to
5 light effects from one 240v power source.
Modes
Sound mode: The various effects will be controlled by the Sound Potentiometer and the
light effects will change with the beat of the music. You can adjust the sensitivity by
adjusting the sensitivity knob to the left for less sensitivity and to the right for more. In Auto
mode, this fixture will be run automatically.
Connections instruction
1. Sound/Auto Switch (You can select Sound or Auto mode with this switch)
2. Fuse Holder
3. AC Input
4. AC Output (loop out to another effect
5. Sound Sensitivity control
6. Microphone for Sound activated mode.

User Manual 151.573
4
Installation
Formountingandfixingtoflatsurface
This fixture can be used on a flat surface or hung from a suitable fixture with the clamp. If you
want to hang it, please be ensure that you fix it with a G-Clamp suitable to take the items
weight.
For safety, please use the safety cable. Which also must be able to withstand 10 times weight
of this fixture.

Trouble Shooting
1. If the fixture does not power on, please check the power connection and fuse.
2. If the fixture still does not work, please return to your supplier for repair. Do not open the
fixture by yourself; there are no user serviceable parts inside
3. If you have any questions about this manual, please contact your supplier
Specification
151.571 LED Mushroom
Power 220-240VAC 50Hz
LED Quantity 6pcs of 3W (2 x Red, 2 x Green,
2 x Blue)
LED Beam Angel 130°; Luminous Flux: 80LM
Modes Sound, Auto
Weight 3.75kg
Size 360 x 270 x 270 mm