Quancom Clock77-amplifier User manual

CLOCK/77 Amplifier

Alle Angaben in diesem Handbuch sind nach sorgfältiger Prüfung zusammengestellt worden, gelten jedoch nicht

als Zusicherung von Produkteigenschaften. QUANCOM haftet ausschließlich in dem Umfang, der in den

Verkaufs- und Lieferbedingungen festgelegt ist. Weitergabe und Vervielfältigung dieses Handbuches und die

Verwertung seines Inhaltes sowie der zum Produkt gehörenden Software sind nur mit schriftlicher Erlaubnis von

QUANCOM gestattet. Änderungen, die dem technischen Fortschritt dienen, bleiben vorbehalten.

Wesseling, Oktober 2010 Version 4.3.1

CLOCK/77 Amplifier

Inhaltsverzeichnis

Kapitel I Overview 1

....................................................................................................................................11Introduction

....................................................................................................................................12Our experience is your profit

....................................................................................................................................13 Extend of Delivery

Kapitel II Card information 2

....................................................................................................................................21General information

....................................................................................................................................22Pin configuration

Kapitel III Block diagram 3

Kapitel IV Annex 4

....................................................................................................................................41Customer Communication and Help

....................................................................................................................................72Technical Support Formular

....................................................................................................................................83Documentation comment form

....................................................................................................................................94Hardware and software configuration form

....................................................................................................................................105 Trademarks

1

1 Overview

1.1 Introduction

Congratulations on the purchase of its QUANCOM CLOCK77-Amplifiers! You are now able

to extend the cable length between the Clock77-receiver and the PC with a Clock77/ISA or

Clock77/PCI up to about 100m to 200m.

1.2 Our experience is your profit

QUANCOM is specialised in development of hard- and software. QUANCOM has become

one of the leading suppliers of measuring and automation technology in industry. At its

design centres QUANCOM has developed an impressive range of products.

1.3 Extend of Delivery

·Clock77-Amplifier (PC module)

·Clock77-Amplifier (receiver module)

·QUANCOM CD with user manual (pdf)

If a component is missing please contact your dealer. QUANCOM reserves the right to

change the extent of delivery without a preliminary announcement

2 Card information

2.1 General information

The signal is transformed by the two amplifier modules by the DCF77-receiver into a

differential data signal, which will transfer long data line over a 100m to 200m without

distribtion.

2.2 Pin configuration

Amplifier module to the PC:

Plug

Socket

PIN1 = GND

PIN 1 = GND

PIN 2 = DO

PIN 4 = DI+

PIN 9 = VCC

PIN 5 = DI-

PIN 9 = VCC

Amplifier module to the receiver:

Plug

Socket

PIN1 = GND

PIN 1 = GND

PIN 4 = DO+

PIN 2 = DI

PIN 5 = DO-

PIN 9 = VCC

3

3 Block diagram

4 Annex

4.1 Customer Communication and Help

Did you need help? If you don’t know how to go on during the installation

or operation of your QUANCOM board please

consult this user’s guide first.

! Tip ! You can find an ASCII – text – file README.TXT,

which includes changes made after printing of this

user’s manual on the QUANCOM installation CD.

! Important ! Informationen bereit:If you have further questions

please contact our support team. For this case

please prepare the following information:

·Exact type of the board.

·Version of the driver

·Version of the QLIB

·Operating system, hardware equipment and bus -

system

·Name and version of the program, which reports the

failure

·A detailed failure description. To make sure, please

try to reproduce the failure, and describe exactly,

which steps led to this failure.

Contact?

The QUANCOM internet website www.quancom.de

5

Per Fax

+49 22 36 / 89 92 - 49

Per E-Mail:

[email protected]

Adress:

QUANCOM INFORMATIONSSYSTEME GmbH

In der Flecht 14

50389 Wesseling

If you need urgent help call:QUANCOM Hotline

Germany:

0 22 36 / 89 92 - 20

Monday-Thursday

from 9:00 to 18:00

Friday

from 9:00 to 17:00

Actual drivers You can find the latest version of QUANCOM

software on our internet website www.quancom.de .

You can also find a lot of information and "Frequently

asked questions (FAQ's)" there., please check if you

are using the latest software version of the

QUANCOM software before contacting the

QUANCOM support.

Repair If you are not sure whether your QUANCOM board is

defective please call the QUANCOM Hotline:

Tel.: +49 22 36 / 89 92 –20

Before sending us the QUANCOM board to be

repaired call:

Tel.: +49 22 36 / 89 92 –20

If you send your QUANCOM board to us, please use

original package or any other suitable package, to

protect the contents against transport damage. You

also need to send us a copy of the original bill and

the RMA number.

You can shorten the repair time by sending us an

exact failure description, so that a faster failure

search is possible. Send your QUANCOM board

directly to the service department of QUANCOM

Informations-systeme GmbH.

7

4.2 Technical Support Formular

If you have internet access please enter the following URL in your browser:

http://www.quancom.de/quancom/qshop.nsf/techniksupport?OpenForm&eng

else photocopy this form and use the copy of this form as a reference for your current

configuration. Complete this form before contacting QUANCOM Informationssysteme GmbH

for technical support help and our applications engineers may answer your questions more

efficiently. If you are using any other QUANCOM hardware or software products please add

them to this configuration form. Include additional pages if necessary.

Name:

Company:

Address:

Phone:

Fax:

Computer brand / Processor:

Operating system:

Display adapter:

Mouse:

QUANCOM board:

Other adapters installed:

Hard disk (capacity, free):

The problem is:

List any error messages:

______________________________

The following steps will reproduce the problem

______________________________

4.3 Documentation comment form

QUANCOM Informationsysteme GmbH would like you to comment on the documentation

supplied with our products. This information helps us to provide you with quality products to

meet your needs. Include additional pages if necessary.

Title:

CLOCK/77 Amplifier

Edition date:

19.10.2010

Name:

Company:

Address:

Phone:

Fax:

Comment:

________________________________________________

Mail to: [email protected]

Fax to: +49 2236 89 92 49

Address: QUANCOM Informationssysteme GmbH

In der Flecht 14

50389 Wesseling

Germany

9

4.4 Hardware and software configuration form

This form allows you to record the settings of your hardware and software. Complete this

form each time you revise your software or hardware configuration, and use this form as a

reference for your current configuration. Completing this form accurately before contacting

QUANCOM Informationssysteme GmbH for technical support helps our application

engineers answer your questions more efficiently.

·QUANCOM Product

Name / Name of board:

Interrupt Level:

DMA Channel:

Base I/O Address:

Operating system:

·Other information

Computer brand and Model:

Processor:

Clock Frequency:

Type of Video Board Installed:

DOS Version:

Programming Language:

Programming Language Version:

·Other Boards in System

Base I/O Address of other Boards:

DMA Channels of other Boards:

Interrupt Level of other Boards:

__________________________________

4.5 Trademarks

Linux is registered trade-mark of Linus Torvalds.

MS, MS-DOS, Microsoft, Visual Basic, Windows, Windows Vista/XP/2000/NT/ME/98/95 is

registered trade-mark of Microsoft Corporation.

XT and PS/2 are trade-marks and IBM, OS/2 and AT are registered trade-mark of

International Business Machines Corporation.

Intel, Pentium is registered trade-mark of Intel Corporation.

USB is registered trade-mark of USB Implementers Forum Inc.

JAVA is registered trade-mark of Sun Microsystems.

DELPHI and Pascal are registered trade-mark of Borland Corporation.

PCI is registered trade-mark of PCI Special Interest Group.

PCI Express is registered trade-mark of PCI-SIG.

National Instruments, LABVIEW is registered trade-mark of National Instruments

Corporation.

Agilent VEE is registered trade-mark of Agilent Technologies.

By other product- and company names, that are mentioned in this manual, it may deal with

trademarks of the respective owners.

Quancom Clock77-Amplifier User manual

Popular Amplifier manuals by other brands