Quanmax ATX-KLS0 Series User manual

KEMB-8100 & ATX-KLS0 Series
Standard / Extended Temperature Industrial-grade
Motherboard in ATX Form Factor with Intel®Sky lake /
Kaby Lake S-Series Processors
User’s Guide

II
KEMB-8100 & ATX-KLS0 Series User’s Manual
Contact Info: Quanmax Inc.
4F, No. 415, Ti-Ding Blvd. Sec. 2NeiHu District,
Taipei 114Taiwan
Tel: [phone]
Fax: [phone]
Visit our site at: www.quanmax.com
© 2016 Quanmax Inc. All rights reserved.
The information in this user’s guide is provided for reference only. Quanmax does not assume any
liability arising out of the application or use of the information or products described herein. This user’s
guide may contain or reference information and products protected by copyrights or patents and does
not convey any license under the patent rights of Quanmax, nor the rights of others.
Quanmax is a registered trademark of Quanmax. All trademarks, registered trademarks, and trade
names used in this user’s guide are the property of their respective owners. All rights reserved. This
user’s guide contains information proprietary to Quanmax. Customers may reprint and use this user’s
guide in other publications. Customers may alter this user’s guide and publish it only after they remove
the Quanmax name, cover, and logo.
Quanmax reserves the right to make changes without notice in product or component design as
warranted by evolution in user needs or progress in engineering or manufacturing technology.
Changes which affect the operation of the unit will be documented in the next revision of this user’s
guide.

Content
3
KEMB-8100 & ATX-KLS0 Series User’s Manual
Content
Content.......................................................................................................................3
Figures.......................................................................................................................5
Tables.........................................................................................................................6
Safety Instructions......................................................................................................9
Before You Begin.........................................................................................9
When Working Inside a Computer...............................................................9
Preventing Electrostatic Discharge............................................................10
Preface.....................................................................................................................12
How to Use This Guide..............................................................................12
Unpacking..................................................................................................12
Regulatory Compliance Statements ..........................................................12
Warranty Policy .........................................................................................13
Maintaining Your Computer.......................................................................14
Chapter 1 Introduction...........................................................................................17
Overview ...................................................................................................17
Product Specifications...............................................................................18
System Block Diagram..............................................................................19
Mechanical Dimensions.............................................................................20
Chapter 2 Hardware Settings ................................................................................21
Overview ...................................................................................................21
Jumper Settings and Pin Definitions..........................................................22
Jumper Settings ......................................................................................23
Rear Panel Pin Assignments...................................................................26
Main Board Pin Assignments...................................................................29
Chapter 3 System Installation ..................................................................................42
Expansion Interfaces.................................................................................42
Memory Module Installation.......................................................................42
Chapter 4 AMI BIOS Setup....................................................................................44
Overview ...................................................................................................44
Main Menu.................................................................................................45
Advanced Menu.........................................................................................46
Power Menu ..............................................................................................59
Security Menu............................................................................................60
Boot Menu.................................................................................................61

Content
4
KEMB-8100 & ATX-KLS0 Series User’s Manual
Save & Exit Menu......................................................................................62
Chapter 5 Driver Installation ..................................................................................64
AppendixA DIO (Digital I/O) Sample Code............................................................65
Appendix B WatchDog Timer Sample Code.............................................................68

Figures
5
KEMB-8100 & ATX-KLS0 Series User’s Manual
Figures
Figure 1 Block Diagram .............................................................................19
Figure 2 Mechanical Dimensions...............................................................20
Figure 3 Jumper Connector .......................................................................21
Figure 4 Jumper and Connector Locations................................................22
Figure 5 Front Panel IO .............................................................................26
Figure 6 Spread apart the ejector tabs, align the DIMM with the socket and
push it straight down until the tabs pop up..........................................43

Tables
6
KEMB-8100 & ATX-KLS0 Series User’s Manual
Tables
Table 1 Product Specifications...................................................................19
Table 2 Jumper List....................................................................................23
Table 3 JP1 Pin-9 Selection for COM3 & COM4........................................23
Table 4 JP2 Keyboard Lock Selection.......................................................23
Table 5 JP3 mPCIE LED Indicator Jumper................................................24
Table 6 JP4 Protected RTC Selection........................................................24
Table 7 JP5 mPCIE / mSATA Selection for MPCIE2 (Q170 models only)..24
Table 8 JP6 ME F/W Selection...................................................................24
Table 9 JP7 AT / ATX Power Mode Selection.............................................24
Table 10 JP8 Clear ME Register................................................................24
Table 11 JP9 mPCIE / mSATA Selection for MPCIE1 (Q170 models only) 24
Table 12 JP12 PCIE Configuration Setting for PEG1 (Q170 models only).25
Table 13 JP13 Terminator Selection for COM1..........................................25
Table 14 JP14 Terminator Selection for COM2..........................................25
Table 15 JP15 Pin-9 Selection for COM1 & COM2....................................25
Table 16 Front Panel Connector List..........................................................26
Table 17 CN14 GbE LAN1 & USB3.0 Port-3, 4 Connector........................26
Table 18 CN15 GbE LAN2 & USB3.0 Port-1, 2 Connector........................26
Table 19 CN17 DVI-D Connector...............................................................27
Table 20 CN18 Line-Out & MIC-In Audio Jacks .........................................27
Table 21 CN19 PS/2 Keyboard & Mouse Mini-DIN Connector...................27
Table 22 CN20 Display Port Connector .....................................................27
Table 23 CN21 RS-232/422/485 COM1 Connector ...................................28
Table 24 CN22 HDMI Port Connector........................................................28
Table 25 Internal Connector List ................................................................29
Table 26ATX1 2x12-Pin ATX Power Supply Wafer....................................30
Table 27ATX2 2x4-Pin ATX Power Supply Wafer......................................30
Table 28 CN1 Sata Express Header (Q170 models only)..........................30
Table 29 CN2 USB3.0 Port-5, 6 Box Header (Q170 models only).............31
Table 30 CN3 RS-232 COM3 Pin Header..................................................31
Table 31 CN4 RS-232 COM4 Pin Header..................................................31
Table 32 CN5 RS-232 COM5 Pin Header..................................................32
Table 33 CN6 RS-232 COM6 Pin Header..................................................32
Table 34 CN7 USB2.0 Port-7, 8 Pin Header ..............................................32

Tables
7
KEMB-8100 & ATX-KLS0 Series User’s Manual
Table 35 CN8 USB2.0 Port-11, 12 Pin Header (Q170 models only) ..........32
Table 36 CN9 USB2.0 Port-9, 10 Pin Header ............................................33
Table 37 CN10 16-bit Digital Input / Output Pin Header.............................33
Table 38 CN12 RS-232/422/485 COM2 Pin Header..................................33
Table 39 CN13 VGA Debug port................................................................33
Table 40 CN16 Front PanelAudio Pin Header...........................................34
Table 41 FAN1 System FAN Wafer............................................................34
Table 42 FAN2 CPU FAN Wafer.................................................................34
Table 43 FAN3 AUX FAN Wafer.................................................................34
Table 44 FP1 Front Panel Pin Header 1 ....................................................34
Table 45 FP2 Front Panel Pin Header 2 ....................................................34
Table 46 MPCIE1 Full Size mPCIE / mSATASocket (H110 models only)..35
Table 47 MPCIE2 Half Size mPCIE / mSATASocket (Q170 models only).36
Table 48 PCI1,2,3,4 32-bit, 33MHz PCI Slot 1,2,3,4..................................37
Table 49 PCIE1,2 PCIEx4 Slot 1,2.............................................................38
Table 50 PEG1 PCIE Express x16 Slot......................................................39
Table 51 SATA1,2,3,4 Serial ATA Port-1,2,3,4 Connector ..........................40
Table 52 SIM1 SIM Card Holder for MPCIE1.............................................41
Table 53 BIOS Main Menu.........................................................................45
Table 54 Advanced Menu...........................................................................46
Table 55 Advanced Menu – Display Configuration.....................................47
Table 56 Advanced Menu – Super IO Configuration..................................48
Table 57 Advanced Menu –Super IO Configuration – Serial Port 1
Configuration ......................................................................................48
Table 58 Advanced Menu –Super IO Configuration – Serial Port 2
Configuration ......................................................................................49
Table 59 Advanced Menu –Super IO Configuration – Serial Port 3
Configuration ......................................................................................50
Table 60 Advanced Menu –Super IO Configuration – Serial Port 4
Configuration ......................................................................................51
Table 61 Advanced Menu –Super IO Configuration – Serial Port 5
Configuration ......................................................................................51
Table 62 Advanced Menu –Super IO Configuration – Serial Port 6
Configuration ......................................................................................52
Table 63 Advanced Menu –CPU Chipset Configuration.............................53
Table 64 Advanced Menu – SATA Configuration........................................54
Table 65 Advanced Menu – USB Configuration.........................................55
Table 66 Advanced Menu – AMT Configuration (Q170 models only).........55

Tables
8
KEMB-8100 & ATX-KLS0 Series User’s Manual
Table 67 Advanced Menu – TPM Configuration (Q170 models only).........56
Table 68 Advanced Menu – DIO Configuration..........................................57
Table 69 Advanced Menu – H/W Monitor...................................................58
Table 70 Power Menu................................................................................59
Table 71 Security Menu .............................................................................60
Table 72 Boot Menu...................................................................................61
Table 73 Save & Exit Menu........................................................................62

Safety Instructions
9
KEMB-8100 & ATX-KLS0 Series User’s Manual
Safety Instructions
Before You Begin
Before handling the product, read the instructions and safety guidelines on the
following pages to prevent damage to the product and to ensure your own personal
safety. Refer to the “Advisories” section in the Preface for advisory conventions used
in this user’s guide, including the distinction between Warnings, Cautions, Important
Notes, and Notes.
Always use caution when handling/operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the
interior of a computer. The power supplies produce high voltages and
energy hazards, which can cause bodily harm.
Use extreme caution when installing or removing components. Refer to the
installation instructions in this user’s guide for precautions and procedures.
If you have any questions, please contact Quanmax Post-Sales Technical
Support.
WARNING
High voltages are present inside the chassis when the unit’s power cord is
plugged into an electrical outlet. Turn off system power, turn off the power
supply, and then disconnect the power cord from its source before
removing the chassis cover. Turning off the system power switch does not
remove power to components.
When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals.
2. Disconnect the computer and peripherals from their power sources or
subsystems to prevent electric shock or system board damage. This does not
apply when hot swapping parts.

Safety Instructions
10
KEMB-8100 & ATX-KLS0 Series User’s Manual
3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the
following page.
4. Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
To help avoid possible damage to system boards, wait five seconds after
turning off the computer before removing a component, removing a system
board, or disconnecting a peripheral device from the computer.
When you disconnect a cable, pull on its connector or on its strain-relief loop,
not on the cable itself. Some cables have a connector with locking tabs. If you
are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cable. As you pull connectors apart, keep them evenly
aligned to avoid bending any connector pins.Also, before connecting a cable,
make sure both connectors are correctly oriented and aligned.
CAUTION
Do not attempt to service the system yourself except as explained in this
user’s guide. Follow installation and troubleshooting instructions closely.
Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation
and follow proper ESD procedure to reduce the risk of damage to components.
Quanmax strongly encourages you to follow proper ESD procedure, which can
include wrist straps and smocks, when servicing equipment.
You can also take the following steps to prevent damage from electrostatic
discharge (ESD):
When unpacking a static-sensitive component from its shipping carton, do not
remove the component’s antistatic packing material until you are ready to install
the component in a computer. Just before unwrapping the antistatic packaging,
be sure you are at an ESD workstation or grounded. This will discharge any
static electricity that may have built up in your body.