Quirk Logic Quilla Series Installation and operating manual

Installation & Safety Guide
Quilla™
Connected eWriter
Let’s Get You Going…

2
CONTENTS
UNPACK QUILLA™.................................................................................................................3
INSTALLING QUILLA ON THE CUSTOM WALL-MOUNT.........................................................3
INSTALLING QUILLA ON VESA-400 MOUNT .........................................................................7
Power Supply Adapter Plugin ............................................................................................7
OPERATING INSTRUCTIONS..................................................................................................7
Powering Your Quilla .........................................................................................................7
CARING FOR QUILLA.............................................................................................................8
Cleaning and Maintenance ................................................................................................8
General Safety Instructions ..................................................................................................8
PROTECTING AGAINST ELECTROSTATIC DISCHARGE ...........................................................9
POWER SAFETY.....................................................................................................................9
BATTERY SAFETY INSTRUCTIONS........................................................................................10
For Battery Disposal.........................................................................................................10
TRANSPORTING ..................................................................................................................10
SYSTEM SPECIFICATIONS....................................................................................................11
CONTACT DETAILS ..............................................................................................................11
LEGAL NOTICES...................................................................................................................11
QL42-ISG-GUID-1.0

3
UNPACK QUILLA™
Carefully unpack Quilla™and all loose items from package. Before installing Quilla, verify that you’ve
received the following:
eWriter: Quilla
Writing device: Pen, 2pcs.
Power supply: Meanwell GST90A19-P1M
Battery: Installed, RRC2040-2
Cords and Cables: Power Supply, Ferrite Core
Mount: QuirkLogic Lift & Go Wall Mount, 2 Wall-Spacers
Screws & Wall Anchors: (13) #8 screws, (13) Anchors and (13) Washers all included
Tools Required
Screwdriver / 4’ Level / Tape Measure / Pencil
CAUTION! Do not connect Quilla to the power source until Quilla is completely assembled and installed on a
wall-mount. Read and understand the entire Installation & Safety Guide.
ON THE WALL & OFF AND RUNNING
INSTALLING QUILLA ON THE CUSTOM WALL-MOUNT
1. Properly choose and prepare the install location for Quilla. Consider access, power, Ethernet access,
ventilation and visibility when choosing your location.
2. Determine the desired height for Quilla. A recommended height is approx. 80” from the floor to the top
of Quilla. The top of the wall mount will sit flush with the top of the device.
3. Disassemble the wall-mount by removing its cover. To remove the cover, gently press the tabs on the
bottom of the unit and lift off the top.
(See Figure 1)
4. Using a tape measure, measure a
horizontal line (29” long) at the 80”
height level. Mark the center of this line and then make a mark (1 3/8” down from the line). Drive an
anchor into the wall in this location for the wall mount center location.
Figure 1 –Quick Release Tabs

4
5. Use the base of the wall-mount and install a screw to the center screw hole anchor, so you can level and
mark the other holes.
6. Use the 4’ level to align the base of the wall-mount. Mark all anchor locations on the wall (with a screw)
as identified in the diagram below. There are a total of 9 screw locations including the center anchor
(See Figure 2).
7. Remove the base of the wall mount and use a screwdriver to install all drywall anchors into your
drywall, if needed.
8. Once anchors are installed, install the base of the wall-mount back on the wall using the screws
provided, into anchors.
9. Install the power brick as shown. Wrap the attached cable around guides and plug the DC power plug
into the DC power socket. (See Figure 3)
Figure 2 –Anchor Locations Based on Template
2
6
4
3
5
3
1
7
8
7
9
Figure 3 –Power & Ethernet

5
10. Install Ethernet cable (optional). Use category 5e or category 6 Ethernet cable that is connected to your
network, plug the Ethernet cable into the Ethernet socket as shown in Figure 3. Use cable guides to
secure the cable. Ethernet cable is optional, as Quilla is able to run off Wi-Fi signals.
(Attach the provided Ferrite Core to the Ethernet cable if connecting to the network using Ethernet.)
11. Plug the AC power cord into the power brick’s AC power socket. Use cable guides to secure the cable.
(See Figure 3)
12. Replace the wall mount cover. Ensure the two top hooks are fitted first then bring the cover down and
push to clip into the two bottom tabs. (See Figure 4)
To complete the installation, two wall-spacers need to be installed. The spacers are installed on the
wall, then a self-adhesive velcro is used as an attachment between the wall-spacer and Quilla.
13. Locate the wall spacers and remove the front face cover with a small screwdriver.
(See Figure 5)
14. Attach both the wall mount spacers to the corresponding velcro pieces preinstalled
on the back of Quilla.
15. Align the edges of Quilla with the wall mount edges, lift Quilla slightly above the top
of the wall mount; then slide Quilla down (at a 30 degree angle) allowing the back
gaps to catch into the hooks at the top of the mount; the device will fall into place.
Press the spacers against the wall. This will mark where your anchors need to go.
Remove Quilla.
16. Small divots will now be visible on the wall indicating the center for the two wall-anchors (three
dots/each spacer). Install two wall-anchors in the center of your three divots.
Figure 4 –Installed Wall-mount
Figure 5 –Spacer
Faceplate

6
Figure 7 - Completed Wall-Mount Install
17. Install the wall-spacer to the wall using a screw for each anchor. (See Figure 6)
18. Replace the spacer face cover.
19. After, the wall-mount and wall-spacers are installed on the wall, align the edges of Quilla with the wall-
mount edges and rehang Quilla onto the mount. Then press firmly on the bottom sides of the device to
engage the velcro on the back of Quilla against the wall-spacers. (See Figure 7)
Figure 6 –Screw
Mounting Locations

7
INSTALLING QUILLA ON VESA-400 MOUNT
1. Use the VESA-400 mounting instructions provided by the VESA manufacturer.
2. Ensure the wall-anchors will support the weight of Quilla and the VESA mount.
3. Ensure the length of the screws attaching to the back of Quilla do not exceed 0.6” or 15mm, as screws
may puncture the screen.
4. Ensure Quilla is installed near a socket-outlet and that the outlet is easily accessible. Do not run
extension cords between an outlet and Quilla, as this can cause hazards.
5. Once the VESA mount is installed and the hardware is attached, connect Quilla to power.
Power Supply Adapter Plugin
1. Plug the DC power adapter into the power supply inlet. See DC plugin
location on the back of the unit.
2. Secure the cable into guiding channels on the back panel of Quilla.
3. Once all hardware and wires are secure, install Quilla onto VESA mount.
4. It is now safe to plug Quilla into the AC outlet.
WARNING! The Quilla must access the network using Wi-Fi when installed on a VESA 400 mount.
OPERATING INSTRUCTIONS
Powering Your Quilla
The Quilla is powered by a wall plugin AC adapter for everyday use. The AC adapter provides charge for
regular and portable operation. It is recommended to have the adapter always plugged in to keep the
rechargeable battery pack at an optimal charge.
For portable use, the Quilla is powered by a rechargeable battery pack. (battery type: RRC2040-2) which runs
for approximately 16 hours of use.
DC Plugin
Location

8
CARING FOR QUILLA
Cleaning and Maintenance
If the Quilla becomes dirty, power the unit off by pressing and holding the power button in the bottom, right
corner. Clean the bezel it with a soft cloth slightly moistened with water or a mild detergent solution. Clean
screen surface with a soft cloth, such as a cleaning cloth for eyeglasses.
Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzene, as it may mar
the finish.
IMPORTANT SAFETY INFORMATION –Don’t Hurt Yourself!
General Safety Instructions
When Installing Quilla
1. Set up your Quilla and accessories on a clean, levelled, even surface.
2. To ensure safe install of Quilla, use a wall mount supplied by QuirkLogic. If another install method is
used, please make sure you follow its safety guidelines to ensure safe installation.
3. Do not lean or place heavy objects against Quilla.
4. Always protect Quilla’s screen. Do not place Quilla with the screen facing down as small area pressure
can damage the screen. Do not scratch or scrape the screen with hard objects or abrasive material.
5. Do not cover Quilla, or enclose it. Without proper airflow, the unit may overheat resulting in permanent
damage.
6. Keep Quilla away from heaters and other heat sources or running air conditioners.
7. Avoid exposing Quilla to extremely hot or cold temperatures. Extreme temperatures can interfere with
its functionality and may damage equipment.
8. Keep Quilla away from humid, wet or damp areas as high humidity or water condensation may damage
Quilla permanently.

9
9. Do not stick any objects into openings on Quilla.
10. There are no user serviceable parts inside Quilla. Do not open the back cover. For any repair, service or
upgrade questions please contact QuirkLogic.
PROTECTING AGAINST ELECTROSTATIC DISCHARGE
Electrostatic discharge (ESD) can harm the Quilla. Under certain conditions static may build up in your body
or the ePen touching the display.
To protect the equipment against harmful ESD it is recommended to discharge your body to a grounded
metal object before you handle Quilla or its components.
POWER SAFETY
Ensure the following guidelines are met before connecting Quilla to an electrical outlet:
1. Ensure Quilla is installed near a socket outlet and that the outlet is easily accessible. If you do not have a
socket outlet nearby, have your electrician install one.
2. Read the power options before you power on Quilla.
3. Ensure there is no visible, physical damage to any wiring, enclosures or connectors. If any of the
components are damaged, do not plug Quilla into a power source.
4. Ensure that the voltage rating and frequency available at the power source is in accordance with the
provided AC/DC switching power adapter.
5. Use only the supplied AC cord and power supply.
6. Connect the DC connector first at the back of the unit, before connecting the AC cord into a power
source.
WARNING! Do not replace the power adapter. For system safety use only the adapter supplied by
QuirkLogic.

10
BATTERY SAFETY INSTRUCTIONS
Battery to be replaced by QuirkLogic authorized service personnel. Contact QuirkLogic for details.
CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
For Battery Disposal
DISPOSE OF USED BATTERIES AS PER INSTRUCTIONS:
✓Recycle batteries per local and national regulations. Contact your local representative for assistance.
The batteries must be disposed only in a discharged state at the collection center. In case of not fully
discharged batteries, provide for a risk against short circuits. Short circuits can be prevented by isolating
the terminals with tape. It is good practice to place tape over terminals regardless of the state of the
battery at disposal.
✓In USA and Canada call: 1-877-2-RECYCLE or find the nearest recycling location at call2recycle.org (USA)
or call2recycle.ca (CANADA)
TRANSPORTING
Quilla contains a lithium ion battery pack. For this reason, it must be shipped under classification UN3481
which requires a special shipping label to be affixed on the packaging of Quilla.
Ship Quilla only in designated packaging with designated markings. Contact QuirkLogic for shipping
instructions.

11
SYSTEM SPECIFICATIONS
Product name Quilla
Dimensions (wxdxh) 740x33x1120 mm / 29x1.3x44 in
Weight 11 kg / 24 lbs
Display size -diagonal- 1066.8 mm / 42 in
Display resolution 2160×2880 pixels
Power adapter input 100-240VAC, 50-60Hz, 1.3A
Quilla power input 19Vdc @ 4.7A
Battery 11.25V, 2950 mAh (Regulatory: CE, UL2054, IEC 62133, UN38.3)
Ethernet IEEE 802.3u for 10/100Mbps, IEEE 802.3ab for 1000Mbps
Wireless Dual: WiFi-IEEE 802.11 a/b/g/n, and Bluetooth 4.0
External USB ports USB 3.0(2x)
Regulatory UL/CSA 60950-1
CONTACT DETAILS
QuirkLogic, Inc.
Suite 900, 11th Avenue Place
214 –11th Avenue SW
Calgary, Alberta, Canada
T2R 0K1
LEGAL NOTICES
This product contains software copyright © 2017 QuirkLogic, Inc. All rights reserved.
Your use of this product is subject to the QuirkLogic’s Service Agreement and End User License Agreement
which can be referenced on the QuirkLogic Technical Support Portal.
e[email protected]
p1-844-211-9801
www.quirklogic.com