Quox Creek VORTEX Fountain Tabletop Fountain User manual


Unpack and unwrap all the parts; wash
everything to remove dust or debris (dust and
debris can make the water cloudy).
Screw the leveling feet (A) into the holes in the
bottom of the fountain.
Make sure the pump’s regulator is full-open
by turning it toward the plus (+) sign.
Attach the tubing to the pump by pushing it
onto the nozzle. It’ll be snug.
With one hand, hold the nozzle inside the
cylinder; with the other hand, gently push the
tubing onto the nozzle on the bottom.
Adjust the feet to make the fountain level.
Check with the included mini-level tool.
“Eyeballing it” doesn’t work well.
WARNING: DO NOT ADD WATER WHILE THE FOUNTAIN IS OPERATING.
Adding water while the fountain is operating can lead to accidental overfilling and flooding.
Tabletop Fountain Quick-Start Guide
1.
2.
3.
4.
5.
6.


Put the pump in the base and drape the cord
over the side, in the notch.
Put the cylinder onto the base with the
pump’s cord threaded through the notch.
Add distilled water through the drain grid; DO
NOT pour water into the cylinder itself. Fill
until water reaches the bottom of the
cylinder.
Lower the tray around the cylinder and onto
the base.
As you plug in the fountain, create a drip-loop
in the cord to keep water from running down
the cord and into the electrical socket.
Download the complete Owner’s Manual at VortexFountain.com.
This Quick-Start Guide is not a replacement for the Owner’s Manual.
Owners are responsible for understanding and following the information and instructions in the Owner’s Manual.
7.
8.
9.
10.
11.
12.
Decorate and enjoy!