Rack Solutions Wall-Mount-PC User manual

RackSolutions.com
[e-mail] Technical Support & Sales 903.453.0801
PC Wall Mount
Installation Instructions
Kit P/N: Wall-Mount-PC
Patent(s) Pending

Page 2
Kit Contents
Assembly Hardware:
(1) Base
(1) Slide
(1) Strap
(4) Drywall Anchors with Screws
(2) Foam Strips
Step 1. Determine Location: Select appropriate location on wall. Consider cable routing
and length.
Step 2. Mark Hole Positions: Hold base in position and mark 4 hole positions with pencil.
PC Wall Mount Installation Instructions

Installation Instructions
Step 3. Install Drywall Anchor: Install one drywall anchor at each hole mark. Using a
#2 Phillips head screwdriver press the anchor into the drywall while turning
clockwise until it is seated flush with the wall.
Step 4. Attach Mount Base: Attach base to wall
using the 4 screws provided. Tighten
Securely.
Step 5. Attach Foam Strips to Base: Attach sticky back foam strips as shown.
If PC width is less than
mounting area of base
move strips in parallel
with outer side of PC.
Page 3

RackSolutions.com
[e-mail] Technical Support & Sales 903.453.0801
Warranty Statement
Innovation First, Inc. warrants our products against defects in material and workmanship for a
period of one (1) year from the date of purchase. Innovation First, Inc. liability shall be limited to
repairing or replacing, at our option, any defective product.
Installation Instructions
Step 6. Thread Strap Through Mount: Attach
slide to base. Remove male fastener from
strap. Thread strap between slide and
base through holes as shown.
Step 7. Attach Strap Fastener: Attach strap fastener and
mount PC. Align slide with top of PC and fasten
securely with strap.
If PC width is less than mounting
area of base use nearest strap
hole to outer side of PC.
Optional fastener position.