RADEMACHER HomePilot 9487 Guide

VBD 658-2 (11.16)
Item No.: 3200 43 29
EN HomePilot® HD Camera (outdoor) 9487
Instruction Manual for Installation and Commissioning
Type: 9487

2
EN
i
Dear Customer...
With your purchase of a HomePilot® HD Camera (outdoor) 9487,
you have chosen a quality product manufactured by RADEMACHER.
Thank you for the trust you have placed in us.
RADEMACHER products have been developed with the greatest
possible convenience in mind. Having applied uncompromising
quality standards and thorough testing, we are proud to be able
to present this innovative product to you.
It’s brought to you by all the highly-qualified
personnel here at RADEMACHER.

3
EN
i
Contents
i Dear Customer... .................................................................2
1. These instructions..............................................................5
1.1 Application of this manual................................................................5
1.2 Related instructions.............................................................................5
2. Hazard symbols ..................................................................6
2.1 Levels of danger and signal words.................................................6
2.2 Symbols used and depictions..........................................................7
3. Glossary - Definition ..........................................................7
4. Included in delivery ...........................................................8
5. Overview of the HD Camera 9487...................................9
6. Product Description........................................................ 10
7. Technical Specifications................................................. 11
8. System requirements...................................................... 12
9. Safety Instructions .......................................................... 13
10. Safety Instructions for the Electrical Connection ..... 14
11. Intended Use .................................................................... 14
11.1 Incorrect use........................................................................................ 14
12. Initial commissioning and logging on to
the HomePilot® prior to installation ............................ 15
12.1 Connecting the HD Camera to the router................................ 15
13. Logging on to the HomePilot®...................................... 17
13.1 Access data for configuring the HD Camera
during initial installation................................................................. 18
14. Logging out from the HomePilot® ............................... 19

4
EN
Contents
i
15. Deleting all settings - Reset .......................................... 19
16. After logging on - prior to installation ........................ 20
17. Installation........................................................................ 20
18. Accessories ....................................................................... 22
19. Simplified EU Declaration of conformity .................... 22
20. Warranty Conditions....................................................... 23

5
EN
i
1. These instructions...
...specify the installation and commissioning of the HomePilot®
HD Camera (outdoor) 9487.
You can find the detailed configuration of the HD Camera in the
service section of our website:
www.homepilot.de/manuals
Enter the URL into the address field of your browser.
1.1 Application of this manual
1.2 Related instructions
◆Please read this manual through completely and follow all
the safety instructions.
◆This manual is a component of the product. Please store it
in an easily accessible place.
◆When passing the HD Camera on to a third party, this
manual must be passed on as well.
◆If this manual is lost, please request a replacement manual.
◆Damage resulting from non-compliance with this manual
and safety instructions will void the guarantee, see detailed
operating instructions for configuration. We assume no
liability for any consequential damage.
i
i

6
EN
i
2. Hazard symbols
The following hazard symbols are used in this manual to
indicate safety instructions:
Danger of fatal electric shock
2.1 Levels of danger and signal words
CAUTION!
This hazard may result in minor or moderate injury if not avoided.
ATTENTION!
This hazard may lead to property damage.
i

7
EN
2.2 Symbols used and depictions
Depiction Description
1. Steps to be taken
2.
◆Itemisation
1) or a) Lists
i
further useful
information
i
i
3. Glossary - Definition
HomePilot®
Central controller unit for RADEMACHER radio products.
Control is carried out via a tablet PC or Smartphone.
LAN (Local Area Network)
Abbreviation for a wired, local computer network
WLAN (Wireless-LAN)
Abbreviation for a local radio network.

8
EN
i
4. Included in delivery
Included in delivery
a) 1 x HD Camera 9487
b) 1 x WLAN antenna
c) 1 x Wall bracket
d) 1 x Mains adaptor
e) 1 x Connecting cable with electrical connectors
f) 1 x Installation set
a)
b) c)
d)
e)
f)

9
EN
i
5. Overview of the HD Camera 9487
1) LAN
2) Audio input
3) Audio output
4) Power supply connection
5) Reset button
Infrared (IR) LEDs,
range approx.
20 m
Antenna
Camera lens
Wall bracket
Antenna connection
Connections:
1)
2)
3)
4)
5)

10
EN
6. Product Description
The HD Camera is a network-compatible camera used to monitor
outside areas. It transmits image data to the HomePilot®. The
HD Camera can be installed in any desired place with the enclosed
wall bracket.
Integrated brightness sensor
For day and night monitoring with infrared LEDs and automatic
image adjustment when dark.
Configuration and logging on to the HomePilot®
The HD Camera can be configured via a PC using the HomePilot®
user interface.
Network port (LAN))
The HD Camera must be connected to a free LAN port on a
router to be able to register and use it in the HomePilot®.
WLAN
Once it has been registered to the HomePilot®, it is possible to
operate the HD Camera via WLAN. For this, the WLAN access
data must be entered via the HD Camera‘s user interface.
First, screw the enclosed antenna onto the HD Camera.
i

11
EN
i
7. Technical Specifications
Mains adaptor
Operating voltage: 230 V / 50 - 60 Hz
Output voltage: 12 V / 1 A
HD Camera general
Supply voltage: 12 V DC via mains adaptor
Maximum current
consumption: 1 A
Consumption: < 4.2 W
Authorised operating
location: Outside areas
Protection class: II
Protection type: IP66
Permissible operating
temperature: -20°C to + 60 °C
Permissible relative humidity: 10 % to 80 % rF
Dimensions (L x W x D): 166 x 62 x 65 mm
Network interfaces:
LAN: Ethernet RJ45
WLAN (IEEE): 802.11 b/g/n, 2.4 GHz
WLAN security
Supported WLAN
Security algorithms:
WEP / WPA / WPA2

12
EN
i
7. Technical Specifications
Camera - Specifications:
Sensor: 1.0 Megapixel CMOS-Sensor
Resolution: 1080 x 720
Video specifications:
Image compression: H.264 / MJPEG
Framerate: 23 frame/s
i
8. System requirements
You require the following for installation:
◆Internet access.
◆A router* with DHCP server and a free LAN port.
◆A freely accessible mains socket (230 V / 50 Hz).
◆A commercially available standard computer with current
web browser (mobile browsers are not supported).
◆A HomePilot® with software version 4.1 x or higher **
The HomePilot® must be connected to the router and be
accessible in the network via computer.
* or DSL modem with router functionality
** You can find the current software version on the HomePilot®
user interface under:
Conguration / System / Firmware Update / display right

13
EN
i
9. Safety Instructions
The use of defective equipment can lead to personal injury
and damage to property (electric shocks / short circuiting).
◆Never use defective or damaged equipment.
◆Check the components included in the delivery beforehand
for damage.
Risk of short circuit when using an incorrect mains adaptor.
◆Using a mains adaptor with a voltage other than that specified
for the power unit included in the delivery may cause damage
to the HD Camera or lead to a short circuit.
◆Only use original accessories from RADEMACHER.
The mains socket and mains adaptor must be easily
accessible at all times.

14
EN
i
10. Safety Instructions for the Electrical Connection
There is a danger of life-threatening electrical shocks when
using the mains adaptor and connecting plugs outdoors.
◆The HD Camera mains adaptor must not be used outdoors.
◆The HD Camera connecting plugs are not weatherproof
and must be protected against rain and all environmental
effects. For this, use a terminal box with protection class
IP66.
i
11. Intended Use
Only use the HD Camera to transmit image data to the
HomePilot® or an external storage device.
Operating conditions
The installation and operation of the radio systems is only
permitted for those systems and devices where a malfunction
in the transmitter or receiver would not cause a danger to
personnel or property or where this risk is already covered by
other safety equipment.
i
Radio systems that transmit on the same
frequency can cause interference.
11.1 Incorrect use
The HD Camera must not be used to monitor public areas.
i

15
EN
i
12. Initial commissioning and logging on to
the HomePilot® prior to installation
In order to commission the HD Camera it must be connected to
the router using a LAN cable.
We recommend that you log on to the HomePilot®
prior to outdoor installation.
◆This will allow you to avoid unnecessary trips to
the installed camera.
i
12.1 Connecting the HD Camera to the router
i
1. Connect the HD Camera to a free LAN port on your router.
For this, use the enclosed LAN cable.
2. Connect the mains adaptor plug with the corresponding
HD Camera connecting cable.
LAN cable to
the router
Mains adaptor
connecting cable
The example below shows connection prior to outdoor installation.

16
EN
12.1 Connecting the HD Camera to the router
i
3. Next, plug the mains adaptor into a 230 V / 50 Hz mains socket.
4. Wait a few moments. The HD Camera now automatically
carries out a self-test.
5. After this, the HD Camera is ready to operate and can be logged
on to the HomePilot®.

17
EN
i
1. Switch the HomePilot® to registering mode. To do this, select
the„Add“ function from the„Configuration / Cameras“ menu.
2. The HomePilot® will automatically search for cameras that are in
the same network and list these.
3. Select the HD Camera, specify a name and other individual
descriptions.
4. Subsequently click on„save“.
5. After this, the HD Camera will be listed on the HomePilot® user
interface under„Cameras“.
13. Logging on to the HomePilot®
i
As additional protection against unauthorised
access, we recommend that you carry out the steps
described in chapter 13.1.

18
EN
i
Depending on your computer settings and
anti-virus programme, you may have to approve
the download and installation.
i
1. Select„Open detailed view“ in the HomePilot® user interface.
2. The HD Camera user interface appears.
3. The following message appears above the input screen:
Plug-ins not found, click here to download.
4. Click on the text and download the Plug-in (Version Windows 7
and Mac OS 10.11.3 or higher). Follow the on-screen
information during installation.
13.1 Access data for configuring the HD Camera
during initial installation
5. Next, log on using the user name and password set in the
factory.
Factory settings:
◆User name = admin
◆Password = rademacher
6. After logging on for the first time, enter a new user name and
secure password, in order to protect your HD Camera from
being used without permission.
i
It is essential that you enter a secure password.
7. The desired settings for the HD Camera can then be selected.

19
EN
i
1. Switch the HomePilot® to log out mode. To do this, select the
„Delete configuration / cameras / devices“ menu.
2. Select the HD Camera and click on„log out manually“.
3. Switch off the HD Camera‘s power supply and remove the
LAN cable.
14. Logging out from the HomePilot®
1. Press and hold the reset button on the HD Camera for
approx. 10 seconds.
2. After it has been successfully reset, a short audible signal is
emitted and the HD Camera automatically carries out a self-test.
The HD Camera will then be reset to the default factory settings.
15. Deleting all settings - Reset
i

20
EN
16. After logging on - prior to installation
i
i
If you have, as recommended, logged on prior to installation, you
must now separate the connected cables from one another again.
17. Installation
There is a danger of life-threatening electrical shocks when
using the mains adaptor and connecting plugs outdoors.
◆The HD Camera connecting plugs are not weatherproof
and must be protected against rain and all environmental
effects.
◆For this, use a terminal box with protection class IP66.
◆The terminal box must be equipped with screw connections
of sufficient dimensions and thickness for inserting the con-
necting cables.
ATTENTION!
If installed incorrectly, the HD Camera may be damaged
and transmission problems / interference may occur.
◆Do not install the HD Camera in a place where it is exposed
to direct sunlight.
◆Do not install the HD Camera next to strong magnetic fields
(e.g. speakers).