RADLEY 5044-794 User manual

Pressure Washer
Surface Cleaner
User Guide
5044-794

©2021 Radley. All Rights Reserved.
SURFACE_CLEANER_UG_EN_2021-09-21

WE'VE GOT YOU COVERED!
Do not return product to store.
Email us at [e-mail] or contact us by
phone at 1-877-528-3772 if you have any questions.
SAVE THESE INSTRUCTIONS
This user guide contains important instructions for
your product.
This user guide covers the safety, operation and maintenance
procedures for the Pressure Washer Surface Cleaner.
All information in this publication is based on the latest
product information available at the time of print.
No part of this publication may be reproduced
without written permission.

WARRANTY INFORMATION
Online: radley.midlandpowerinc.com
Email: [e-mail]
Phone: [phone]
Warranty support, operation assistance and product support is provided by Midland
Power Inc., a licensed manufacturer of Radley Pressure washers. Please contact us
directly for any warranty service questions.
See ‘Limited Warranty’ for more information.

5044-794
TABLE OF CONTENTS
1. Safety 1
2. Learn About Your Surface Cleaner 3
2.1 Component Identification 3
3. Surface Cleaner Operation 4
4. Maintenance 5
5. Technical Specifications 5
6. Limited Warranty 6

1
1. SAFETY
DANGER!
Read instruction manual before operating this device; failure to do so
may result in injury, damage to equipment or property.
This surface cleaner is designed to clean sidewalks, driveways, decks,
and other large surfaces. Two jets beneath the plastic cover emit
pressurized water while rotating rapidly. The water emitted by this
surface cleaner can injure and cause damage.
1.1 OPERATOR SAFETY
WARNING!
ALWAYS wear protective eyewear.
ALWAYS keep clear of rotating nozzles and water jet output.
NEVER direct water jets towards yourself, other people, animals, vehicles,
windows, electrical equipment, or the pressure washer itself.
ALWAYS keep this device on a flat surface with the nozzles downwards
when starting your pressure washer.
1.2 USE SAFETY
WARNING!
DO NOT exceed 3300PSI during operation.
DO NOT depress the trigger and release water from the pressure washer
until the surface cleaner rests on the surface you are cleaning.
DO NOT reach under this device while in operation.
DO NOT operate when other people are in the immediate vicinity.
DO NOT lock spray gun trigger open while operating this device.
DO NOT modify this device or operate when damaged.
DO NOT allow this device to remain stationary on soft surfaces, such as
wood, for prolonged periods while in operation, always test a small area
to see if the surface can withstand the high pressure.
Be aware the surface cleaner may push back against the pressure washer
gun and lance assembly during operation, always hold the gun and lance
firmly with two hands.
The rotating jets must not touch the work surface. Striking any raised
obstacle during operation will damage the jets. If contact does occur
and results in vibration, stop immediately. Continued operation could
result in injury or damage.

25044-794
1.3 MAINTENANCE SAFETY
WARNING!
Drain water completely if operating in a cold environment to prevent
freezing while in storage.
Store in a dry environment out of the reach of children.
This surface cleaner is not designed for scouring or scrubbing.

3
2. LEARN ABOUT YOUR SURFACE CLEANER
This section will show you how to identify key parts of your surface cleaner. Going
over the terminology below will make sure we’re on the same page.
2.1 COMPONENT IDENTIFICATION
1/4” Male Quick
Connect Coupler
Bristles
Jet Nozzle
Jet Nozzle

45044-794
3. SURFACE CLEANER OPERATION
WARNING!
This surface cleaner is compatible with most pressure washers. A
pressure washer, hose, gun, and lance (none included) are required to
operate this surface cleaner. Do not operate with any pressure washer
exceeding 3300PSI, higher pressures will damage this device and may
cause injury.
Note
Your pressure washer lance must be equipped with a female ¼” quick
connection fitting.
1. Ensure your pressure washer is turned o. Assemble your pressure washer,
hose, gun, and lance.
2. Depress the trigger on your pressure washer gun to release any pressurized
water from the assembly.
3. Place the surface cleaner on a level, hard surface.
4. Connect the end of your pressure washing lance to the male quick connect
coupler located at the top of the surface cleaner.
5. Start the pressure washer.
6. Place surface cleaner on the surface you are cleaning, firmly grip the gun and
lance, and depress the trigger to start cleaning.
Note
To stop, turn o your pressure washer and depress the trigger to release
any pressurized water from the assembly before disconnecting the
surface cleaner.
1/4” Female Quick Connect
Coupler on Lance (not included)
1/4” Male Quick
Connect Coupler

5
4. MAINTENANCE
Make sure that no part of the surface cleaner is connected to the pressure washer
during cleaning or maintenance procedures. Always keep clean and free from debris.
Do not use any detergents or solvents. Clean with a soft brush or a slightly
moist cloth.
5. TECHNICAL SPECIFICATIONS
Surface Cleaner
Maximum PSI (lb/po2) 3300 PSI (lb/po2)
Nozzles 2
Hose Fitting Type 1/4" Quick Connect
Diameter 15.5 in / 395 mm

65044-794
6. LIMITED WARRANTY
Radley products are distributed and supported by:
Midland Power Inc.
376 Magnetic Drive, Toronto, ON M3J 2C4, Canada
This product is warranted to be free of defects in material and workmanship
for ninety (90) days from date of purchase. This warranty guarantees that any
defective parts will be repaired or replaced at no cost, including diagnosis and
replacement parts.
This limited warranty begins at the initial time of retail purchase and covers
manufacturer’s defects caused by a defect in components or workmanship during
the warranty period. The warranty coverage is continual from the initial date of
purchase and does not restart at anytime under any circumstances. This limited
warranty is valid for residential or recreational applications only and only when the
surface cleaner receives all necessary preventative maintenance as described in the
User Guide.
Proof of purchase is required for warranty claims. Keep a copy of the original receipt
with this user guide.
Customer Service
Online: radley.midlandpowerinc.com
Email: [e-mail]
Phone: [phone]