Rain Soft Hydrefiner II User manual

Part No.: 16806
ev: C 05/16
RainSoft Hydrefiner II-SC-BNFP, Hydrefiner II-SC-BNFV ,Hydrefiner II-SC-CHFP and Hydrefiner II-SC-CHFV are tested
and certified by WQA to NSF/ANSI 42 and 53 for the specific performance claims as verified and substantiated by test data.
See the performance data sheet for specific reduction claims.
RainSoft Hydrefiner II-SC-BNFP, Hydrefiner II-SC-BNFV, Hydrefiner II-SC-CHFP and Hydrefiner II-SC-CHFV are tested
tested and certified by WQA to NSF/ANSI 372 for low lead compliance.
™
Rainsoft Division of Aquion, Inc
101 S. Gary Ave
Roselle, Illinois 60172
1.847.437.9400 or 1.800.860.7638
www.rainsoft.com
Premium Drinking Water System
II
Hydrefiner

Table of Contents
Operational Specifications .......................................................................... 3
Product Certification Information ............................................................ 3
Installation Instructions .......................................................................... 4–6
System Start Up ............................................................................................ 6
Maintenance Requirements ........................................................................ 7
How to Change the Filter Cartridge .......................................................... 7
Exploded View and Parts List................................................................ 8 - 9
Faucet Assembly and Info.......................................................................... 10
Troubleshooting Guide .............................................................................. 11
Warranty Information ................................................................................12
Installer Specification Sheet ...................................................................... 13
Perfomance Data Sheet .............................................................................. 14
Congratulations on your purchase of one of the finest Drinking Water Systems available to homeowners.
This Owner’s Manual is designed to assist with the installation, operation, and maintenance of the Hydrefiner II System.
It is our sincere hope that this manual is clear, concise, and helpful to you as a new owner.
Questions? If you have any questions regarding the installation, operation or servicing of this system, please contact
your local RainSoft Dealer. Your RainSoft Dealer will be familiar with your particular situation, your water conditions,
etc. and should be able to address your concerns promptly and efficiently.

3
Operational Specifications
Water Pressure
30 psi – 100 psi (2.07 bar – 6.89 bar)
Operating Temperatures
34 °F – 100 °F (1.1 °C – 37.8 °C)
Shut Off Valve
A shut off valve should be used to stop the flow of water to the
Hydrefiner II during maintenance and extended periods of inactivity.
Additional Specifications
Do not install this system where water is microbiologically unsafe or
of unknown quality without adequate disinfection before or after the
system. Systems certified for cyst reduction may be used on disin-
fected waters that contain filterable cysts.
This system must be installed in accordance with all applicable state
and local laws and regulations.
This system must be installed in an area not affected by extreme heat,
cold or the elements. The selected installation area must be adequate
for easy service of all parts.
This system is designed to treat cold water only. The installation must
be on a cold water supply.
Data Chart
Product Certification Information
RainSoft Hydrefiner II-SC-BNFP, Hydrefiner II-SC-BNFV,
Hydrefiner II-SC-CHFP and Hydrefiner II-SC-CHFV are tested and
certified by WQA to NSF/ANSI 42 and 53 for the specific perform-
ance claims as verified and substantiated by test data. See the perform-
ance data sheet for specific reduction claims..
RainSoft Hydrefiner II-SC-BNFP, Hydrefiner II-SC-BNFV,
Hydrefiner II-SC-CHFP and Hydrefiner II-SC-CHFV are tested
tested and certified by WQA to NSF/ANSI 372 for low lead compli-
ance.
.
Water treatment devices sold to retail consumers in California,
accompanied by certain health claims, must be certified by the State of
California Department of Public Health. This product is not certified
in the State of California for the purpose of making health claims.
Model # Faucet Model Maximum Service
Flow Rate Service Capacity
HYD EFINE II- SC
BNFP
BNFV
CHFP
CHFV
0.50 gpm (1. 89 lpm) 400 gallons (1514 liters)

Items Required for Installation
Tools:
Drill, drill bits, Screwdriver, Tube Cutter, adjustable wrench, Vinyl
gloves
Parts not included in Package:
Inlet shut off valve, 3/8 inch O.D. Tubing, and Mounting Screws.
Installation Location
For your convenience, the Hydrefiner II filter bracket assembly is
designed to be mounted on either side of the cabinet.
Installation Instructions
1. Install an Inlet Shut Off Valve ( ot Supplied)
• Turn off the cold water supply and open the cold water faucet to
relieve any line pressure (see figure 1).
• Install an inlet shut off valve (not supplied) between the existing
cold water supply shut off valve and the kitchen faucet, in a way
that conforms to state and local plumbing codes (see figure 1).
2. Install Filters and Secure
• Remove the filter assembly from the packaging.
• Remove Sumps from INLET and OUTLET sides of the filter
assembly
• Wearing sterile gloves, remove the Sediment Filter* from the
packaging and push the filter into the INLET side cap
(see figure 2).
• Remove the Carbon Filter from the packaging and push the filter
into the OUTLET side of the filter assembly (see figure 2).
• Secure filter housings by hand tightening Counter Clockwise
(looking from top to the filter assembly (see figure 3)
4
4
INLET
OUTLET
SEDIMENT
FILTER
CARBON
BLOCK
COLD WATER SUPPLY
SHUT-OFF VALVE
INLET SHUT-OFF VALVE
Figure 2
Figure 1
!
Important ote: Be careful not to
contaminate the filter cartridge by
touching non-sterile objects.
ENSURE O-RING IS
SEATED IN FILTER
HOUSING CORRECTLY
HAND TIGHTEN
FILTER HOUSING
ONTO THE BRACKET
Figure 3
* Sediment Filter does not have a bottom cap and is sealed by the filter housing pinching from the bottom.

3. Mount the System
• Use screws (Not Supplied) to secure the Hydrefiner II bracket
assembly to the planned location. (See Figure 4)
4. Install the Faucet
• Select a location for the faucet to be mounted.
• Drill Hole according to the manufacturer’s recommendations.
• Mount Faucet per instructions. (See Page 10)
• Use 3/8 Tubing (Not Supplied) to connect the faucet to the
system outlet. Make sure the flow restrictor is installed in the 3/8
inch tubing (not supplied) connected to the outlet of the
Hydrefiner II system. To secure the connection, press the tubing
in firmly.(See Figure 5)
•For an ice maker connection, install a tee (not supplied) between
the outlet and the new faucet. Connect the tubing to the ice
maker.
4. Connect the Inlet Shut Off Valve (Not Supplied)
• Use 3/8 inch OD tubing (not supplied) to connect the shut
off valve to the inlet of the filter housing (see figure 6). To secure
the connection, press the tubing in firmly.
5
5
!
Important ote: Flow restrictor will not fit
in 1/4 inch OD tubing. It can only be used in
3/8 inch OD tubing.
5
.
5
0
1
8
.
5
0
5
.
0
0
11.4 in (29.0 cm)
10.2 in (25.9 cm)
10.4 in (26.4 cm) With Cover
5.0 in (12.7 cm)
4.8 in (12.2 cm) without Cover
5.1 in (13.0 cm) with Cover
7.0 in (17.8 cm) Mi in mum Required
from mounted wall.
USING PHILPS OFFSET
SCREWDRIVER
TO SECURE THE FILTER
TO WALL
Figure 4
PUSH TUBE STRAIGHT PAST
O-RING TILL TUBE STOPS
TUBE CORRECTLY LOCATED
IN SECURED POSITION
PUSH IN COLLECT TO RELEASE TUBE
Figure 5

System Start Up
1. Turn on the Cold Water Supply
• Allow water to enter the system and let it stand for 5 minutes.
2. Check for Leaks
• If a leak is present, make the necessary repairs.
3. Flush the System
• Open the new faucet and allow the water to flow for 10 minutes.
This process will flush the disinfectant and carbon fines from the
system.
4. Cover Assembly
• Place Cover onto Hydrefiner II and ensure tubing is correctly
secure. (See Figure 7)
6
Figure 7
OUTLET 3/8 TUBE INSTALLATION
INLET 3/8 TUBE INSTALLAT I ON
FR
OM INLET
FLOW
RESTRICTOR
TOFA
UCET
S
H
UT
O
FFVAL
VE
Figure 6

Maintenance Requirements
eplacing the Filter Cartridge
The filter cartridge will eventually become exhausted or consumed
and will need to be replaced. RainSoft replacement filter cartridges are
available through your local RainSoft Dealer. If you are unable to
order replacement parts from your local RainSoft Dealer, please
contact RainSoft at 1-800-860-7638 for assistance.
Testing Your Water
If you are relying on this system to reduce contaminants, we recom-
mend testing your water periodically (2 times a year minimum) to
ensure that the system is performing properly. Your local RainSoft
Dealer can arrange this testing for a nominal fee.
How to Change the Filters
1. Turn off the cold water supply and open the system faucet to
relieve any line pressure. Remove Cover
2. Place a drip pan or bucket if necessary to catch the water from the
filter canisters to prevent spillage.
3. To replace the filters, use a Slim Line Spanner Wrench (not
supplied) unscrew the filter housings from the cap. (See Figure 8)
4. Replace the filters and reassemble (See helpful tips).
5. Turn on the inlet water to the Hydrefiner II system.
6. Inspect system for any leaks, make the necessary repairs.
7. Open Faucet. Allow the water in system to flush for 10 minutes.
8. Replace cover.
!
Important ote: We recommend replacing the
filter cartridge every 400 gallons. Your
RainSoft Dealer can give you specific replace-
ment schedules based on your water usage
and incoming water quality.
Figure 8
Model Pre-filter Post-filter
HYDREFINER II-SC 51639 51845
!
Important ote: It is important to maintain the
quality of your system by using only genuine
RainSoft replacement filters. Other “made-to-
fit” alternative filters claim to perform the
same duties as the original RainSoft parts, but
these items are not approved for use in your
system! “Made-to-fit” alternative filters will
increase the probability of leaks, putting your
entire system at risk! Also, many aftermarket
replacement filters are not tested for safe
contact with drinking water.
When “made-to-fit” alternative filters are
placed into your RainSoft Hydrefiner II
System, the product warranty will become null
and void and the system will lose its certifica-
tion. To guarantee proper operation and certi-
fication of your RainSoft Hydrefiner II System,
please use genuine RainSoft parts.
Helpful Tips: To avoid contamination, we
recommend the use of sterile gloves while
changing the system components.
!
Important ote: When Unscrewing Filter
Housings use of Slim Line Spanner Wrench is
required. Unscrewing filter housings with use
of other unapproved tools can damage the
filter housings and void warranty.
!
Important ote: It is recommended that the
sump o-rings be replaced on each filter change
to insure proper compression of the o-ring.
Failure to do so may result in over tightening
of the sump to create a seal and can cause
undue stress on the sump and cap that can
lead to cracking of these components under
pressure.
7

8
ITEM QUA TITY PART UMBER DESCRIPTIO
1 1 51740 HYDREFINER II COVER ASSEMBLY
2 1 51572 SUMP CAP 3/8 OUTLET POST ASSY
3 1 51596 SUMP CAP 3/8 INLET PRE ASSY
4 1 51845 HY II CARBON FILTER
5 1 51639 UF II 5 MICRON MELT BLOWN FILTER
6 2 12994 237 O-RING 9516
7 2 51605 UF II SUMP, SLIM LINE GRAY SPEC LES
8 4 71497 SCREW #10-16 BT X 1 IN
9 1 51366 UF II SUMP WATER WAY COUPLING
10 2 51367 UF II SUMP COUPLING LOC
11 2 19621 3/8 O-RING
12 2 51561 UF II WASHER UNIBODY
13 2 19914 O-RING 013
14 1 51932 0.5 GPM FLOW RESTRICTOR HYDREFINER II
15 2 19005 LOC ING CLIP 3/8 IN
Exploded View Parts List

----
9
Exploded View
2
8
6
7
4
5
7
6
3
13
12
11
10
13
12
11 10
9
1
14
15

Hole Dimension
with use of air gap
Min Ø
15
16"
Max Ø1
"
1
2
Air Gap OUT
3
8
" Tube
to Drain Connection
Air Gap IN
1
4
" Tube to UF II
Drain Connection
Product Water
IN with
3
8
" Tube
Item # QTY Part No. Description
1 1
51609 CONTEMP PLUS B-NIC EL FAUCET ASSY
( INCLUDES ITEM # 2)
51624 CONTEMP PLUS CHROME FAUCET ASSY
( INCLUDES ITEM # 2)
51616 CONTEMPORARY FAUCET B-NIC EL ASSY
( INCLUDES ITEM # 2)
51603 CONTEMPORARY FAUCET CHROME ASSY
( INCLUDES ITEM # 2)
2 1 51617 FAUCET FITTING 3/8 X 7/16-24 UNS O-RING *
* This item is included in the faucet assembly, but may be purchased separately.
Faucet Assembly and Info
10

11
If the troubleshooting guide did not resolve the symptom, please contact your local ainSoft Dealer for service. If
you cannot locate your local ainSoft Dealer, please contact ainSoft Customer Service at 1-800-860-7638 or log
onto www.rainsoft.com for the name and location of your nearest Dealer.
Troubleshooting Guide
Symptom Cause Solution
1. Taste/Odor (general)
2. otten Egg Odor
1. The filter cartridge may be saturated. 1. Replace the filter cartridge.
1. Typically a sign that H2S (Hydrogen Sulfide)
gas, which can occur at any time,is present in
the water.
1. Treat the water for hydrogen sulfide
reduction. Replace the filter cartridge.
This system has not been tested or approved
for the reduction of hydrogen sulfide.
4. “Milky” Color in
Water or in Ice
Cubes
1. Small air bubbles are passing through the
system.
1. Air bubbles do not affect the performance of
the system.
3. Odor with Color on
the Filter Cartridge
1. H2S (Hydrogen Sulfide) caused by iron
(orange/blackish color) and/or decaying
organisms (slimy; blotchy colors).
1. Have your water tested for the presence of
iron and/or sulfur bacteria; if present, seek
professional advice on proper well cleaning/
disinfection/treatment. If no iron/sulfur
bacteria are detected, then treat the water for
hydrogen sulfide reduction using an
appropriate device. This system has not been
tested or approved for the reduction of iron
bacteria, sulfur bacteria, or hydrogen sulfide.
2. Air is trapped inside the filter housing. 2. Open the faucet and let the water run for 3
to 5 minutes after installation and filter
changes.
3. Reduce the TDS concentration using
deionization, distillation, or reverse osmosis.
This system has not been tested or approved
for the reduction of TDS.
3. Have your water tested for the concentration
of total dissolved solids (TDS). The higher the
TDS concentration, the cloudier the ice will
tend to be.
5. No / Low Pressure at
outlet.
1. Water Supply is Turned Off. 1. Turn on the Water.
2. Water Supply is Blocked. 2. Clear Blockage. If this does not work,
Blockage could be internal to the Hydrefiner
II or external with the water line. Contact
your Rainsoft Dealer for issues wth the
Hydrefiner II.
3. Sediment cartridge is Fouled. 3. Replace Sediment Cartridge - Contact your
Rainsoft Dealer for New Filters
4. Incoming water line is crimped or pinched
off.
4. Check incoming line and verify no crimps in
line. Remove any pinch points.

Limited
Lifetime Warranty
For as long as you own the equipment
RainSoft Division of Aquion, Inc. , believing its
HYD EFINE II
to be of exceptional quality, hereby warrants said equipment to its first purchaser at retail as follows:
THE FILTE HOUSING IS WA ANTED AGAINST DEFECTS IN MANUFACTU E FO THE LIFETIME OF
THE FI ST PU CHASE AT ETAIL.
THE FILTE CA T IDGE SE VICE LIFE IS DEPENDENT ON SPECIFIC WATE CONDITIONS AND
USAGE. EFE TO THE OWNE S MANUAL FO ECOMMENDED EPLACEMENT F EQUENCY.
This warranty begins at the time the equipment is first connected for use, and is contingent upon the return of a signed
owner's registration card.
This warranty does not require replacement of the entire unit. If the equipment does not perform properly, you should
request service from the dealer that sold you the equipment. If you are not satisfied, you should notify our Customer
Service Manager. If we are not able to arrange local servicing, you should send the defective part(s) (or, if you prefer,
send the entire unit,) directly to the manufacturer, freight prepaid, with proof of purchase and a copy of this warranty.
The defective part(s) (or entire unit) will either be repaired or new RainSoft part(s) furnished, for a nominal charge to
cover labor, handling, packing and the increase, if any, in the retail price of the part(s) since the date of purchase.
Genuine RainSoft parts must be used. Failure to use genuine RainSoft parts will void the warranty and certifications.
This warranty does not include labor charges, and does not cover installation, transportation, or any other claims or
torts. Some states do not allow the exclusion or limitation of incidental or consequential damages, so parts of the above
limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. You also
have implied warranty rights. In the event of a problem with warranty service or performance, you may be able to go
to a small claims court, a State court, or a Federal District Court.
This warranty is void if equipment is not installed and operated according to instructions. It does not apply to damage
caused by abuse, accident, neglect, freezing, fire, or other abnormal conditions beyond the company’s control. This
warranty is void on any part from which the manufacturing date has been removed or made illegible.
Benefits will be provided by various types of RainSoft equipment when installed and operated according to the manu-
facturer's recommendations. Operational, maintenance and replacement requirements are essential for the product to
perform as advertised. All claims are based on the best available information at the time of printing. Manufacturer
makes no representations as to the suitability of this equipment for a particular application. Buyer relies entirely on the
dealer's recommendations in the purchase of this equipment.
Independent RainSoft dealers may include, together with your RainSoft product, a product or component that is not
manufactured by RainSoft or their parent company, Aquion, Inc. Any non-RainSoft product may be covered by the
manufacturer of that product, and is not covered by the RainSoft warranty. Aquion, Inc. does not warrant that your
RainSoft product and the non-RainSoft product will perform properly when used together, and assume no liability
therefore.
RainSoft Division of Aquion, Inc.
101 S. Gary Avenue
Roselle, Illinois 60172 USA
12

13
Installer Specification Sheet
Dealer Name:
Phone Number:
Installation Number:
Installation Date:
Model Number:
Serial Number:
Line Pressure: (psi)

14
ACT VATED CARBON
WATER F LTER SYSTEM
PERFORMANCE DATA SHEET - page 1 of 2
Ra nSoft HYDREFINER II- SC models
DR NK NG WATER F LTRAT ON SYSTEM
•CAPAC TY: 400 GALLONS (1514 L TERS)
• FLOW RATE: .5 GPM (1.89 LPM)
• OPERAT NG PS OF SUPPLY: 30 - 100 PS
(2.07-6.89 BAR)
• OPERAT NG TEMPERATURE: 34 - 100οF (1.1-
37.8οC)
REPLACEMENT F LTERS
DESCR PT ON PART NUMBER
PRE-F LTER(5 MICRON SEDIMENT
FILTER)51639
POST-F LTER ( HYII CARBON FIL-
TER) 51845
NOTE: This system has been tested according to NSF/ANS 42 and 53 for the reduction of the substances listed below.The concentration of the indicated
substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as speci-
fied in NSF/ANS 42 and 53.
CONTAM NANT REDUCED
CONTAM NANT
NFLUENT CHAL-
LENGE CONCENTRA-
T ON (mg/L)
MAX MUM PERM SS -
BLE PRODUCT
WATER CONCENTRA-
T ON (mg/L)
LEAD 0.15 +/- 10% 0.0100
MTBE 0.015 +/- 20%0.0050
MERCURY 0.006 +/- 10% 0.0020
ADD T ONAL CONTAM NANT REDUCED
THE UN T SHOULD BE NSTALLED N AN AREA NOT AFFECTED BY EXTREME
HEAT, COLD OR THE ELEMENTS. THE AREA MUST ALLOW THE SYSTEM TO
BE SERV CED QU CKLY AND EAS LY TO CHANGE THE CARTR DGE.
TH S SYSTEM MUST BE NSTALLED N ACCORDANCE W TH ALL APPL CABLE
STATE AND LOCAL LAWS AND REGULAT ONS.
DO NOT USE W TH WATER THAT S M CROB OLOG CALLY UNSAFE OR OF
UNKNOWN QUAL TY W THOUT ADEQUATE D S NFECT ON BEFORE OR
AFTER THE SYSTEM.
TESTED UNDER STANDARD LABORATORY COND T ONS, ACTUAL RESULTS MAY
VARY DUE TO LOCAL WATER COND T ONS.
THIS PERFORMANCE DATA SHEET IS NOT FOR USE IN CALIFORNIA.
TESTED AND CERT F ED BY WQA AGA NST
NSF/ANS STANDARD 42 FOR THE
REDUCT ON OF AESTHET C CHLOR NE,
CLASS NOM NAL PART CULATE, AND
TASTE AND ODOR.
TESTED AND CERT F ED BY WQA AGA NST
NSF/ANS STANDARD 53 FOR
ASBESTOS,CYST, LEAD, MTBE, MERCURY,
AND VOC REDUCT ON.
TESTED AND CERT F ED BY WQA AGA NST
NSF/ANS STANDARD 372 FOR LOW LEAD
COMPL ANCE.
IMPORTANT NOTICE: READ TH S PERFORMANCE DATA
SHEET AND COMPARE THE CAPAB L T ES OF TH S UN T
W TH YOUR ACTUAL WATER TREATMENT NEEDS. T S
RECOMMENDED THAT BEFORE PURCHAS NG A WATER
TREATMENT UN T YOU HAVE YOUR WATER SUPPLY TEST-
ED TO DETERM NE YOUR ACTUAL WATER TREATMENT
NEEDS.
CONTAM NANT
INFLUENT CHAL-
LENGE CONCENTRA-
T ON (mg/L)
REDUCT ON
REQU REMENT
PART CULATE, CLASS 1 PART -
CLES 0.5 TO < 1 ìm
at least 10,000 parti-
cles/mL >/= 85% Reduction
ASTHET C CHLOR NE 2.0+/-10% 50% REDUCT ON
VOC .30+/- 30 95% REDUCT ON
CYSTS (Cryptosporidium,
Giardia lamblia, Protozoan) 50,000/L 99.95% Reduction
ASBESTOS 10(7) - 10(8) fibers/L 99% Reduction
CONTAMINANT
INFLUENT
CHALLENGE
CONCENTRA-
TION mg/L
MAXIMUM PERMIS-
SIBLE PRODUCT
WATER
CONCENTRATION
mg/L
USEPA
MCL
(MG/L)
ALACHLOR 0.050 0.001 0.002
ATRAZ NE 0.100 0.003 0.003
BENZENE 0.081 0.001 0.005
CARBOFURAN 0.190 0.001 0.04
CARBON TETRACHLOR DE 0.078 0.0018 0.005
CHLOROBENZENE 0.077 0.001 0.1
CHLOROP CR N 0.015 0.0002 --------
2,4-D 0.110 0.0017 0.07
D BROMOCHLOROPROPANE (DBCP) 0.052 0.00002 0.0002
O-D CHLOROBENZENE 0.080 0.001 0.60
P-D CHLOROBENZENE 0.040 0.001 0.075
1,2-D CHLOROETHANE 0.088 0.0048 0.005
1,1-D CHLOROETHYLENE 0.083 0.001 0.007
C S- 1,2-D CHLOROETHYLENE 0.170 0.0005 0.07
TRANS- 1,2-D CHLOROETHYLENE 0.086 0.001 0.10
1,2-D CHLOROPROPANE 0.080 0.001 0.005
C S-1,3-D CHLOROPROPYLENE 0.079 0.001 --------
D NOSEB 0.170 0.0002 0.007
ENDR N 0.053 0.00059 0.002
ETHYLBENZENE 0.088 0.001 0.70
ETHYLENE D BROM DE (EDB) 0.044 0.00002 0.00005
HALOACENTON TR LES (HAN):
BROMOCHLOROACETON TR LE 0.022 0.0005 ----------
D BROMOACETON TR LE 0.024 0.0006 ----------
D CHLOROACETON TR LE 0.0096 0.0002 ----------
TR CHLOROACETON TR LE 0.015 0.0003 ----------
HALOKETONES (HK):
1,1-D CHLORO-2-PROPANONE 0.0072 0.0001 --------
1,1,1-TR CHLORO-2-PROPANE 0.0082 0.0003 --------
HEPTACHLOR 0.025 0.00001 0.0004
HEPTACHLOR EPOX DE 0.011 0.0002 0.0002
HEXACHLOROBUTAD ENE 0.044 0.001 --------
HEXACHLOROCYCLOPENTAD ENE 0.060 0.000002 0.05
L NDANE 0.055 0.00001 0.0002
METHOXYCHLOR 0.050 0.0001 0.04
PENTACHLOROPHENOL 0.096 0.001 0.001
S MAZ NE 0.120 0.004 0.004
STYRENE 0.150 0.0005 0.10
1,1,2,2-TETRACHLOROETHANE 0.081 0.001 --------
TETRACHLOROETHYLENE 0.081 0.001 0.005
TOLUENE 0.078 0.001 1.00
TR BROMOACET C AC D 0.042 0.001 --------
2,4,5-TP (S LVEX) 0.270 0.0016 0.05
1,2,4-TR CHLOROBENZENE 0.160 0.0005 0.07
1,1,1-TR CHLOROETHANE 0.084 0.0046 0.20
1,1,2-TR CHLORETHANE 0.150 0.0005 0.005
TR CHLOROETHYLENE 0.180 0.001 0.005
TR HALOMETHANES 0.300 0.015 0.08
XYLENES (TOTAL) 0.070 0.001 10

15
ACT VATED CARBON
WATER F LTER SYSTEM
PERFORMANCE DATA SHEET - page 2
of 2
Ra nSoft HYDREFINER II-SC models
DR NK NG WATER F LTRAT ON SYSTEM
TH S SYSTEM CONTA NS REPLACEMENT COMPONENTS CR T-
CAL FOR EFFECT VE REMOVAL OF CONTAM NANTS. THE
WATER SHOULD BE TESTED PER OD CALLY TO VER FY THAT
THE SYSTEM S PERFORM NG SAT SFACTOR LY.
SEE WARRANTY FOR SPEC F C WARRANTY NFORMAT ON.
ADD T ONAL NOTES:
• The list of substances which this treatment device reduces does not
necessarily mean that these substances are present in your water supply.
• This system is designed for treatment of cold water only.
• Systems certified for cyst reduction may be used on disinfected waters that
may contain filterable cysts.
• Class particulate reduction 85%, particle size >= 0.5 micron < 1 micron.
(1) CHLOROFORM WAS USED AS A SURROGATE FOR VOC CLA MS REDUC-
T ON; THE ACTUAL REDUCT ON RATE OF CHLOROFORM WAS > 95 % AS
TESTED BY WQA (AT 200% CAPAC TY).
(2) REPLACE F LTER CARTR DGE AFTER 400 GALLONS (1514 L TERS) OR
SOONER DEPEND NG UPON WATER COND T ONS
(3) MFL = M LL ON F BERS PER L TER W TH F BERS GREATER THAN
10 M CRONS.
(4) NO MCL ESTABL SHED AT THE T ME OF PR NT NG.

ainSoft Division of Aquion, Inc.
101 S. Gary Avenue
oselle, Illinois 60172
Main Switchboard: 1.847.437.9400
Customer Service: 1.800.860.7638
www.rainsoft.com
©2014 ainSoft Division of AQUION, INC.
™