ramia HB-D1500 User manual

Assembly Instructions - HB-D1500, HB-D1800
Attention:
Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life of the
bench.
NOTICE
•The bench must not be left in damp or humid conditions which will cause movement in the wood. Recommended
humidity level max. 60%.
•If you bought workbench without surface treatment, we recommend you to finish the bench by colourless varnish
or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture. Don´t forget
to repeat surface treatment each 6 months including holes for bench dogs.
•To increase the stability of your workbench we recommend you to bolt the bench to the floor.
•
Each months tighten all screws and bolts
.
Parts Packing 1 Packing 2 Date
•
Each months tighten all screws and bolts
.
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: [phone], fax: [phone], www.ramia.cz

No. Quantity No. Quantity
1
1
11
4
2
2
12
4
3
2
13
4
4
2
14
4
5
2
15
4
2
1
8
7
1
17
4
8
2
18
28
9
2
19
4
10
2
20
1
M-12x100 Hex Bolt
M-12 Nut
Hardware
Handle Ends
Dowels
Vise Handle
Holes for tretchers if cupboard is used
M-12 Washer
Hex Head x40mm Bolt
5x50mm Wood Screw
Middle Stretchers
Centre Shelf
Vise Face
Bench dogs (not shown)
Glue (not shown)
X Y
Wedges for tool well
Vise Assembly
Hex Head x30mm Bolt
2
Parts
Bench Top
Front leg with bench dog holes
Back leg
Top Rail support
Base
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: [phone], fax: [phone], www.ramia.cz

Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: [phone], fax: [phone], www.ramia.cz