Randall RH100 User manual

RH100 Owner’s Manual
100 Watt Guitar Amplifier

Master Controls: The RH100 is equipped with Clean and Lead master controls. Each channel can be
set to your desired volume.
Preamp Controls: This amp features two preamp channels, Gain 1 and Gain 2 for the Lead channel
and Level 1 for the Clean channel. Each can be adjusted for desired gain.
EQ Controls: The RH100 has a three-band EQ with shape control for the lead channel and a
separate three-band EQ for the clean channel.
Effects: The RH100 is equipped with a footswitchable spring reverb.
Output Power: The amp offers Constant Current, solid-state technology at 100-watts of RMS
power. The RH100 is designed to handle any 4 or 8 Ohm load.
Additional Features: This amp offers several additional features including line out with independant level
control, external speaker jack, effects loop with level controls, headphone jack,
and footswitchable channels for gain 1/gain 2, and clean channel.
Power Output: 100W .THD0.2% (at 1 KHz 8Ω)
Power Consumption: 200VA
Input Sensitivity: -46dB
Controls
(All Controls Set At 5): Bass: +/- 15db @ 50Hz
Mid: +/- 10db @ 600Hz
Treble: +/- 18db @ 3Hz
Contour: +18db @ 15Hz
Effects Loop: Send 200mV
Return 50k ohms
Signal Output: 0 db @ 600ohms
Dimensions: 885W x 335H x 345D