RATTAN WF282744AAD User manual

WF282744AAD, WF282745AAD,
WF282746AAD, WF282747AAD, WF282748AAD
Page:
1/7
ASSEMBLY INSTRUCTIONS
PHUC THINH BINH DINH COMPANY LIMITED, 0256.3501166, F1 lot, Nhon Hoa industrial park, An Nhon town, Binh Dinh province, Viet Nam
RATTAN SOFA SET

A
B
C
D
E
G
F
H
I
x1
x6
x2
Page:
2/7
PHUC THINH BINH DINH COMPANY LIMITED, 0256.3501166, F1 lot, Nhon Hoa industrial park, An Nhon town, Binh Dinh province, Viet Nam
Note:
1. 50% Tighten before fixing all scews, Allen wrench is recommendedinstead
of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screw with tools gradually.
4. If screw are not aligned with holes furing assembly, please loosen all the other
screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all screws, adjust it on a flat ground and
tighten up all screws again.
6. Note: If one or some screws are fully tighten during assembly, chances are the
others will not be aligned with holes. In addition, all the holes are designed to be relatively
larger to provide more space for the adjustment of the screws.

HARDWARE
A x3
B x6
C x3 D x3 E x3
F x1
H x1
I x2
G x2
WF282744AAD
WF282745AAD
WF282746AAD
WF282747AAD
WF282748AAD
G x4
F x5
A x3 C x3 D x3 E x3
Page:
3/7
PHUC THINH BINH DINH COMPANY LIMITED, 0256.3501166, F1 lot, Nhon Hoa industrial park, An Nhon town, Binh Dinh province, Viet Nam
CARTON CONTENT:

BOLT M6x40MM WASHER M6
ALLEN KEY
1
x 42 pcs
2
x 24 pcs
3
x 36 pcs
4
x 66 pcs
5
x 2 pcs
Ax 6 Bx 6 Cx 6
Dx 6 Ex 6 Fx 6
Gx 6 Ix 2
6
x 36 pcs
Extra 4 pcs
BOLT M6x25MM
BACK SINGLE
FRAME
SEAT SINGLE
FRAME
FRONT SINGLE
FRAME
SEAT CUSHION
PILLOW
CONNECTOR
ROUND TABLE RECTANGULAR TABLE
RIGHTSIDE
SINGLE FRAME
LEFT SIDE
SINGLE FRAME
Hx 1
LEG
7
x 14 pcs
BOLT M6x55MM
Extra 2 pcs Extra 3 pcs Extra 6 pcs
Page:
4/7
PHUC THINH BINH DINH COMPANY LIMITED, 0256.3501166, F1 lot, Nhon Hoa industrial park, An Nhon town, Binh Dinh province, Viet Nam
Part List:
Hardware:

50%
50% 50%
A
B
2
4
C
D
E
2
4
4
1
4
2
1
41
4
A x 1
2 x 2
1 x 3
4 x 3
E x 1
Connect part from STEP 3 & Front Single
Frame (E) with Bolt (1) & Washer (4).
B x 1
4 x 2
Connect part Back Single Frame (A) &
Seat Frame (B) with Bolt (2) & Washer (4).
2 x 1
1 x 2
C x 1
4 x 3
Connect part from STEP 1 & Left Side
Frame (C) with Bolt (1) (2) & Washer (4).
4 x 3
D x 1
1 x 2
2 x 1
Connect part from STEP 5 & Right Side
Frame (D) with Bolt (1) (2) & Washer (4).
Page:
5/7
PHUC THINH BINH DINH COMPANY LIMITED, 0256.3501166, F1 lot, Nhon Hoa industrial park, An Nhon town, Binh Dinh province, Viet Nam
STEP 1 STEP 2
STEP 3 STEP 4

100% 100%
6
3
H
I
100% 100%
3
63
6
5 x 1
6 x 4
Connect part from STEP 4 & Leg (6)
with Bolt (3).
Connect part H & Leg (6) with Bolt (3)
100% Tighten.
100% Tighten.
3 x 4
3 x 4
6 x 4
H x 1 I x 1
6 x 4
3 x 4
Connect part I & Leg (6) with Bolt (3)
100% Tighten.
Page:
6/7
PHUC THINH BINH DINH COMPANY LIMITED, 0256.3501166, F1 lot, Nhon Hoa industrial park, An Nhon town, Binh Dinh province, Viet Nam
STEP 5 STEP 6
STEP 7 STEP 8

G
F
7
Put on Seat cushion (F) & Pillow (G)
to complete the Single Chair.
7 x 14
F x 6
G x 6
Connect Single Chair & Rectangular Table with connector (7).
Page:
7/7
PHUC THINH BINH DINH COMPANY LIMITED, 0256.3501166, F1 lot, Nhon Hoa industrial park, An Nhon town, Binh Dinh province, Viet Nam
STEP 9
STEP 10