Ravelli Magnus User manual

USE AND MAINTENANCE MANUAL
Magnus

SCHEDA PRODOTTO
PRODUCT DATASHEET
FICHE DE PRODUIT
PRODUCTKAART
PRODUKTDATENBLATT
FICHA DEL PRODUTO
EU 2015/1186
Marca / Trademark / Marque / Merk / Marke / Marca Ravelli
Modello / Model / Modèle / Model / Modell / Modelo Magnus
Classe di efficienza energetica / Energy Efficiency class /Classe d’Efficacité Énergétique /
Energie-efficiëntieklasse / Energieeffizienzklasse / Clase de eficiencia energética A+
Potenza termica diretta / Direct thermal power / Puissance thermique directe / Directe
warmteafgifte / Direkte Wärmeleistung / Potencia calorífica directa 14,4 kW
Potenza termica indiretta / Indirect thermal power / Puissance thermique indirecte /
Indirecte warmteafgifte / Indirekte Wärmeleistung / Potencia calorífica indirecta --
Indice di efficienza energetica /Energy Efficiency Index / Indice de eficiencia energética /
Energie-efficiëntie-index / Energieeffizienzindex / Índice de eficiencia energética 126
Efficienza utile (Potenza nominale) / Useful efficiency (Nominal power) / Rendement utile
(puissance nominale) / Nuttig rendement (bij nominale) / Brennstoff-Energieeffizienz
(Nennwärmeleistung) / Eficiencia energética útil (potencia nominal)
89,4 %
Efficienza utile (Potenza ridotta)/ Useful efficiency (Reduced power) / Rendement utile
(puissance minimale) / Nuttig rendement (bij minimale) / Brennstoff-Energieeffizienz
(Mindestlast) / Eficiencia energética útil (potencia minima)
93,0 %
Rispettare le avvertenze e le indicazioni di installazione e manutenzione periodica riportate nel manuale di
istruzioni. / Comply with the warnings and instructions concerning installation and routine maintenance provided in
the instruction manual. / Respecter les avertissements et les indications sur l’installation et l’entretien périodique
fournis dans le manuel d’instructions. / Neem de waarschuwingen en instructies voor installatie en periodiek
onderhoud in acht zoals aangegeven in de hoofdstukken van de gebruiksaanwijzing. / Beachten Sie die Warnungen
und Hinweise betreffend die Installation und regelmäßige Wartung in der Bedienungsanleitung. / Respete las
advertencias y las indicaciones de instalación y mantenimiento periódico, detalladas en los capítulos del manual de
instrucciones.
14,4
Magnus
PRODUCT DATASHEET
FICHA DO PRODUTO
ΔΕΛΤΙΟ ΠΡΟΪΟΝΤΟΣ
PRODUKTBLAD
KARTA PRODUKTU
PODATKOVNI LIST IZDELKA
EU 2015/1186
Trademark / Marca / Μάρκα / Mærke / Marka / Blagovna znamka Ravelli
Model / Modelo / Μοντέλο / Model / Model / Model Magnus
Energy Efficiency class / Classe de Eficiência Energética / Κατηγορία ενεργειακής απόδοσης /
Energiklasse / Klasa efektywności energetycznej / Razred energetske učinkovitosti A+
Direct thermal power / Potência calorífica direta / Άμεση θερμική ισχύς / Direkte
varmeydelse / Bezpośrednia moc produktu / Neposredna izhodna toplotna moč 14,4 kW
Indirect thermal power / Potência calorífica indireta / Έμμεση θερμική ισχύς / Indirekte
varmeydelse / Pośrednia moc produktu / Posredna izhodna toplotna moč --
Energy Efficiency Index / Índice de eficiência energética / Δείκτης ενεργειακής απόδοσης /
Indeks energieffektivitet / Wskaźnik efektywności energetycznej / Kazalo energetske
učinkovitosti
126
Useful efficiency (Nominal power) / Eficiência energética útil (potência nominal) / Ωφέλιμη
ενεργειακή απόδοση (ονομαστική ισχύ) / Virkningsgrad (nominel varmeydelse) / Sprawność
użytkowa (nominalnej mocy) / izkoristek energije (nazivni izhodni moči)
89,4 %
Useful efficiency (Reduced power) / Eficiência energética útil (potência mínima) / Ωφέλιμη
ενεργειακή απόδοση (ελάχιστο ισχύ) / Virkningsgrad (mindste varmeydelse) / Sprawność
użytkowa (minimalnym mocy) / izkoristek energije (nazivni izhodni moči)
93,0 %
Comply with the warnings and instructions concerning installation and routine maintenance provided in the
instruction manual. / Respeitar as advertências e as indicações de instalação e manutenção periódica referidas nos
capítulos do manual de instruções. / Τηρείτε τις προειδοποιήσεις και τις οδηγίες εγκατάστασης και περιοδικής
συντήρησης που αναφέρονται στα κεφάλαια του εγχειριδίου των οδηγιών. / Overhold advarslerne og angivelserne
for installation og vedligeholdelse, som angivet i kapitel i brugsvejledningen. / Należy przestrzegać ostrzeżeń i
wskazówek dotyczących instalacji i okresowej konserwacji podanych w rozdziałach w instrukcji obsługi. /
Upoštevajte opozorila in navodila za namestitev in redno vzdrževanje, navedena v poglavjih priročnika z navodili.
Magnus
14,4

DECLARATION OF PERFORMANCE
Declaration of performance according to Regulation (EU) 305/2011
n. : 225CPR13.07
1. Unique identification code of the product type:
M0001JR00, residential space heating appliance fired by wood pellets
EN 14785:2006
2. Type, batch or serial number or any other element allowing identification of the construction product as required under Art. 11(4):
Magnus,
3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer:
Residential space heating appliance fired by wood pellets
4. Name, registered trade name or registered trademark and contact address of the manufacturer as required by Art. 11 (5):
Ravelli
Aico S.p.A.
Via A. Kupfer, 31
25036 Palazzolo s/O (Bs) Italia
5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2):
---
6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V:
System 3, System 4
7. In case of the declaration of performance concerning a construction product covered by a harmonised standard:
The notified laboratory IMQ (NB 0051) performed the determination of the product type on the basis of type testing under system 3 and issued
test report CS20-0058801-01
8. Declared performances:
Harmonized technical specification:
EN 14785:2006
Essential characteristics
Performance
Fire safety
Reaction to fire
A1
Distance to combustible materials
Minimum distances (mm):
rear = 100
sides = 250
front = 1000
ceiling = 650
floor = 0
Risk of burning fuel falling out
Pass
Emission of combustion products
(at 13% of O2)
Nominal heat output
CO 0,002 % - 25 mg/Nm3
NOx 125 mg/Nm3
OGC 2 mg/Nm3
PM 12 mg/Nm3
Reduced heat output
CO 0,051 % - 633 mg/Nm3
OGC 2 mg/Nm
3
Surface temperature
Pass
Electrical safety
Pass
Cleanability
Pass
Maximum operating pressure
--
Flue gas temperature at nominal heat output
165 °C
Mechanical resistance(to carry a chimney/flue)
NPD
Nominal heat output
14,4 kW
Room heating output
14,4 kW
Water heating output
--
Efficiency Ƞ
89,4 % Nominal heat output
Ƞ
93,0 % Reduced heat output
9. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance
is issued under the sole responsibility of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer Claudio Mezzalira, Operations Manager
Place Palazzolo sull'Oglio Date 23/02/2021 Sign _______________

Dichiarazione di conformità UE
EU Declaration of Conformity
Declaration de Conformite UE
(DoC)
Il costruttore
The manufacturer
Le fabricant
Aico S.p.A.
Via A. Kupfer, 31
25036 Palazzolo s/O (Bs) –Italy
ph: [phone], e-mail: [e-mail]
DICHIARA che la dichiarazione viene rilasciata sotto la propria responsabilità e si riferisce al seguente
prodotto:
DECLARES that the DoC is issued under our sole responsibility and belongs to the following product:
DÉCLARE que la declaration est délivré sous notre seule responsanilité et elle se refère au suivant produit:
Tipo di prodotto
Product type
Type de produit
Stufa a pellet
Pellet stove
Poêle à granulés de bois
Marchio
Trademark
Marque
Ravelli
Modello
Model
Modèle
Magnus
L'oggetto della dichiarazione di cui sopra è conforme alla pertinente normativa di armonizzazione
dell'Unione:
The object of the declaration described above is in conformity with the relevant Union harmonisation
legislation:
L'objet de la déclaration décrit ci-dessus est conforme à l'harmonisation de l'Union concernant la
législation la directive:
•2014/30/EU, EMCD
•2014/35/EU, LVD
•2011/65/EU, 2015/863/EU, 2017/2102/EU, RoHS
Sono state applicate le seguenti norme armonizzate e/o specifiche tecniche:
The following harmonised standards and/or technical specifications have been applied:
Les normes et les spécifications techniques harmonisées suivantes ont été appliquées:
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60335-1
EN 60335-2-102
EN 62233 EN 50581
Palazzolo Sull'Oglio (BS), ITALY
19/11/2020

Use and maintenance manual Magnus
Pag.6
Rev.1 21/04/2021
Sommario
Preface........................................................................................................................................................................ 8
IDENTIFICATION .........................................................................................................................9
Stove identication ................................................................................................................................................... 9
Manufacturer identication ...................................................................................................................................... 9
Reference standards................................................................................................................................................. 9
WARRANTY ................................................................................................................................10
Certicate of warranty............................................................................................................................................. 10
Warranty conditions................................................................................................................................................ 10
Registration of warranty ......................................................................................................................................... 10
Info and problems ................................................................................................................................................... 10
GENERAL INFORMATION .........................................................................................................11
Supply and safe-keeping ....................................................................................................................................... 11
Language ................................................................................................................................................................. 11
Symbols used in the manual ................................................................................................................................. 11
SAFETY MEASURES ........................................................................................................................................ 11
General safety warnings ........................................................................................................................................ 11
Residual risks ......................................................................................................................................................... 12
DESCRIPTION OF THE STOVE..................................................................................................13
Intended use ........................................................................................................................................................... 13
Reasonably foreseeable incorrect use ................................................................................................................. 13
Obligations and forbidden actions ....................................................................................................................... 14
Characteristics of the fuel ..................................................................................................................................... 15
Non-permitted fuels................................................................................................................................................. 15
TECHNICAL CHARACTERISTICS ............................................................................................16
Technical diagram Magnus .................................................................................................................................... 17
Main parts ................................................................................................................................................................ 18
Description of operation......................................................................................................................................... 18
Automatic cleaning system.................................................................................................................................... 19
Recharge the fuel .................................................................................................................................................... 19
User training ............................................................................................................................................................ 19
Safety devices.......................................................................................................................................................... 20
SHIPPING AND INSTALLATION ...............................................................................................21
Safety warnings for transportation and installation ........................................................................................... 21
Set-ups for the smoke evacuation system ........................................................................................................... 22
Installation ............................................................................................................................................................... 23
Removing of the xing brackets............................................................................................................................ 26
Assembly of the wheels.......................................................................................................................................... 27
Assembly of the bae ............................................................................................................................................ 28
Positioning of the monobloc.................................................................................................................................. 29
Fume extractor......................................................................................................................................................... 29
CONFIGURATIONS.....................................................................................................................30
Ash drawer, cleaner and card................................................................................................................................. 30
Pellet hopper cover ................................................................................................................................................. 33
Door .......................................................................................................................................................................... 34
COATING.....................................................................................................................................36
Minimum (internal) dimensions of the coating..................................................................................................... 36
Air vents ................................................................................................................................................................... 36
Access door............................................................................................................................................................. 36
CONNECTIONS ..........................................................................................................................37
Connection with external air intake....................................................................................................................... 37
Chimney connection .............................................................................................................................................. 37
Electrical connection .............................................................................................................................................. 37
Ducting and ventilation........................................................................................................................................... 38
Connection of external probe or thermostat ....................................................................................................... 38
Testing and commissioning .................................................................................................................................. 39
Electric scheme Magnus......................................................................................................................................... 39

Use and maintenance manual Magnus
Pag.7
Rev.1 21/04/2021
CONTROLS AND USE.................................................................................................................40
Control panel description....................................................................................................................................... 40
Handheld touch radio initialization ....................................................................................................................... 40
Description of the handheld set............................................................................................................................. 41
Description of the display ...................................................................................................................................... 41
Time and date setting ............................................................................................................................................. 42
PPROCEDURES FOR USE .........................................................................................................43
Checks prior to start-up ......................................................................................................................................... 43
Feed screw loading ................................................................................................................................................. 43
Switching the appliance on and o ....................................................................................................................... 43
Failed ignition ......................................................................................................................................................... 44
Setting operating temperature and power: .......................................................................................................... 44
OPERATING PHASES OF THE APPLIANCE..............................................................................44
Sequence of ignition phases .......................................................................................................................... 44
Modulation ............................................................................................................................................................... 44
Description of menu functions .............................................................................................................................. 44
Setting ...................................................................................................................................................................... 47
Double ducting ....................................................................................................................................................... 49
Stove phase general layout.................................................................................................................................... 53
INSTALLATION QUICK GUIDE RAVELLI SMART WI-FI...........................................................57
Connect the WiFi module cable ............................................................................................................................. 57
App............................................................................................................................................................................ 57
Connection to the WiFi module.............................................................................................................................. 57
Account registration ............................................................................................................................................... 59
MAINTENANCE .................................................................................................................................................. 61
Safety warnings for maintenance .......................................................................................................................... 61
Cleaning .................................................................................................................................................................. 61
Extraordinary maintenance .................................................................................................................................... 62
Failure cases............................................................................................................................................................ 65
STORAGE AND DISPOSAL ............................................................................................................................. 68
Disposal ................................................................................................................................................................... 68
TROUBLESHOOTING .................................................................................................................68
The stove does not work ........................................................................................................................................ 68
Dicult lighting ....................................................................................................................................................... 68
Smoke leakage......................................................................................................................................................... 68
The glass gets dirty easily...................................................................................................................................... 68
Downtime (end of season) ..................................................................................................................................... 68

Preface
Dear Customer, We would like to thank you for choosing one of our stoves.
We invite you to read this manual carefully, before starting installation and use, so that you are able to benefit from all of its
characteristics better and in full safety. It contains all necessary information for correct installation, start-up, operation, cleaning,
maintenance, etc.
Keep this manual in a suitable location, do not discard it without reading it.
Incorrect installation, maintenance and improper use of the product relieve the Manufacturer of all liability deriving from use of the
stove.
For further information and requirements contact your Ravelli-authorised Technical Assistance Centre.
All rights reserved. No part of this instructions manual can be reproduced or transmitted through any electronic or mechanical
means, including photocopies, recordings or any other storage system, for other purposes that are not exclusively use by the buy-
er’s staff, without the express written consent of the Manufacturer.

Use and maintenance manual Magnus
Pag.9
Rev.1 21/04/2021
IDENTIFICATION
Stove identication
Type of product PELLET STOVE
Trademark Ravelli
Model Magnus
Manufacturer identication
Manufacturer Aico S.p.A.
Via Consorzio Agrario, 3 - 25032
Chiari (BS) - Italy
T. + 39 030 7402939
[email protected]
www.ravelligroup.it
Reference standards
The Magnus stoves that this manual refers to are compliant with the regulation:
305/2011 CONSTRUCTION PRODUCT REGULATION
and the following directives
2014/53/EU (RED)
2011/65/EU 2015/863/EU, 2017/2102/EU, (RoHS)
2009/125/EC (Ecodesign)
And the following harmonised standards and/or technical specications have been applied:
EN 14785; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 60335-1; EN 60335-2-102; EN 62233; EN 50581; ETSI
EN 300220-1
All local regulations, including those referring to national and European standards, must be respected when installing the appliance.
Remote control: Synthetic Declaration of Conformity (DoC)
The manufacturer Aico S.p.A. declares that the Remote Control, with the Ravelli brand and model PNET00003 (Palm Touch) is in
conformity with the relevant Union harmonisation legislation: 2014/53/EU (RED), and that the following harmonised standards and/
or technical specications have been applied: ETSI EN 301 489-3, ETSI EN 301 489-1, EN 60950-1 A11+A1+A12+AC+A2, EN
62479.
These declarations can be found in full format on the website www.ravelligroup.it.
PIN,nom Heat input power
(max)
PIN,part Heat input power
(min)
Pnom Nominal power Ppart Reduced power
COnom CO at nominal
power
COpart CO at reduced
power
ηnom Efficiency at nominal
power
ηpart Efficiency at reduced
power
pnom Minimum draught at
nominal power
TFlue gas temperature
at nominal
power
230
V - 50
Hz
Alimentation
Distance to combustible materials
dS-L Left side dCCeiling
dS-R Right side dFFront
dRRear dBFloor
Usare solo il combustibile raccomandato:
Use only reccomended fuel:
Utilizer seulement les combustibles recomandés:
Use solo el combustible recomandado:
Gebruik alleen de aanbevolen brandstof:
Nur empfohlenes Brennmaterial verwenden:
50 Hz
Pellet di legno
16,1 kW 7,5 kW
14,4 kW 7,0 kW
0,0507 %0,0020 %
93,0 %89,4 %
165 °C
12 Pa 0,12 mbar
650 W
230 V
APPARECCHIO PER IL RISCALDAMENTO DOMESTICO ALIMENTATO A PELLET DI LEGNO
RESIDENTIAL SPACE HEATING APPLIANCE FIRED BY WOOD PELLETS
APPAREIL DE CHAUFFAGE DOMESTIQUE À CONVECTION À GRANULES DE BOIS
APARATO DE CALEFACCION DOMESTICA ALIMENTADO CON PELLETS DE MADERA
HUISHOUDELIJKE RUIMTEVERWARMINGSTOESTELLEN GESTOOKT MET GEPERST HOUT
RAUMHEIZER ZUR VERFEUERUNG VON HOLZPELLETS
Model: MAGNUS
P
IN,nom
P
IN,part
P
nom
P
part
CO
nom(13%O2)
CO
part(13%O2)
η
nom
η
part
p
nom
T
nom
W
Wood pellet
Granulee de bois
Pellet de madera
Houtpellet
Holzpellets
Ø 6 mm
Leggere le istruzioni d’uso
/ Read and follow the operating manual / Lire et suivre le mode d’emploi / Lea
y respete le manual de operacion / Lees en volg de handleiding voor bediening / Bitte lesen und befolgen
Sie die Montage und Nutzungsanweisungen
Distanza minima da materiali infiammabili
Minimum distance from flammable materials
Distance moindre de matériels inflammables
Distancia minima de materiales inflamables
Minimale afstand van brandbare materialen
Mindestabstand zu brennbaren Materialien
250 mm
250 mm
100 mm
d
S-L
d
S-R
d
R
650 mm
d
C
1000 mm
d
F
0 mm
d
B
D.o.P. n° 225CPR13.07 (Notified Body 0051)
EN 14785:2006
Anno di produzione: 2021
AICO S.p.A. - Via Kupfer, 31 - 25036 Palazzolo - Brescia (Italy) 21
C199R8001

Use and maintenance manual Magnus
Pag.10
Rev.1 21/04/2021
WARRANTY
Certicate of warranty
Ravelli thanks you for the trust granted with the purchase of one of its products and invites the purchaser to:
• read the installation, use and maintenance instructions for the product;
• read the warranty conditions contained below.
Warranty conditions
The warranty for the Customer is acknowledged by the Dealer under the terms of law.
The Dealer acknowledges the warranty only if the product has not been tampered with and only if it has been installed in accordance
with the Manufacturer’s instructions.
The limited warranty covers manufacturing material defects, as long as the product has not broken sue to an incorrect use, negli-
gence, incorrect connection, tampering, installation errors.
The warranty becomes null and void even if only one requirement in this manual is not complied with.
The following are not covered by warranty:
• the combustion chamber refractory stones;
• the door glass;
• the gaskets;
• the paint job;
• the stainless steel or cast iron combustion grille;
• the resistance;
• the Majolica cladding;
• the aesthetic parts;
• any damages caused by unsuitable installation and/or use of the product and/or shortcomings on the part of the customer.
The use of poor quality pellet or any other unauthorised fuel may damage the product’s components, cause its warranty to be voided
and as a result eliminate the connected manufacturer liability.
It is therefore recommended to use good quality pellet that fulfils the requirements listed in the dedicated chapter.
All damages caused by transportation are not recognised, for this reason it is recommended to carefully check goods upon receipt,
immediately warning the reseller of any damage.
Registration of warranty
To activate the warranty, it is necessary to register the product on the Guarantee Portal on the website
www.ravelligroup.it, by entering your data and the purchase receipt.
Info and problems
Dealers authorised by Ravelli use a trained Technical Service Centre network to meet the Customer’s requirements. For any
information or request for assistance, please contact your Dealer or the Technical Service Centre.

Use and maintenance manual Magnus
Pag.11
Rev.1 21/04/2021
GENERAL INFORMATION
Supply and safe-keeping
The manual is supplied in printed format.
Keep this manual safe, with the stove, so that the user can consult it easily.
The manual is an integral part, for safety reasons, therefore:
• it must be kept intact (in full). If it gets lost or ruined it is necessary to immediately ask for a new copy:
• it must be kept with the stove until demolition (including relocation, sale, rental, lease, etc....).
The Manufacturer will not be held liable for improper use of the stove and/or damage caused by operations that are not set forth in
the technical documentation.
Language
The original manual was written in Italian.
Any translations into additional languages must be carried out based on the original instructions.
The Manufacturer is liable for the information contained in the original instructions; the translations into di󰀨erent languages cannot be
fully veried therefore if any inconsistency arises it will be necessary to follow the text in the original language or contact our Technical
Documentation O󰀩ce.
Symbols used in the manual
symbol denition
📌This symbol is used to identify particularly important information in the manual. This information also concerns the
safety of users involved in using the stove.
⚠
This symbol is used to identify important warnings for the safety of the user and/or the stove.
SAFETY MEASURES
General safety warnings
📌Read this instructions manual carefully before stove installation
and use. Failure to observe the instructions set forth herein
can void the warranty and/or cause damage to property and/
or people.
⚠ Stove installation, system verification, operation verification
and initial calibration must be carried out exclusively by qualified
and authorised staff.
⚠ The stove needs to be connected to a single chimney that
guarantees the draught declared by the Manufacturer and
observes the installation regulations that apply to the installation
site.
⚠ The room where the stove is installed must have an air intake.
⚠ The stove must not be used as an incinerator or differently
from its purpose

Use and maintenance manual Magnus
Pag.12
Rev.1 21/04/2021
⚠ Do not use any fuel other than fire pellet. It is strictly forbidden
to use liquid fuels.
⚠ It is prohibited to use the stove with the door or ash drawer
open or the glass broken.
⚠ Do not touch the hot surfaces of the stove without suitable
protective equipment, to avoid getting burned. When it is
running, the outer surfaces reach hot temperatures to the
touch.
⚠ It is forbidden to make unauthorised changes to the stove.
⚠ Before using the stove it is necessary to know the position and
function of the controls.
⚠ If the chimney catches fire you must call the fire brigade.
⚠ Only use original spare parts. Any tampering and/or
replacements that have not been authorised by Ravelli can pose
a danger to the user’s safety.
⚠ In the event of particularly adverse weather conditions, the
safety systems could intervene and switch off the stove. In any
case, doe not disable the safety systems.
Residual risks
The stove was designed so as to guarantee the user’s essential
safety requirements.
Safety was integrated into the stove’s design and construction as
much as possible.
For every residual risk there is a description of the risk and the zone
or part that is applies to (unless the risk applies to the entire stove
overall). Procedure-related information is also provided on how to
avoid the risk and on the correct use of the personal protective
equipment required by and made compulsory by the Manufacturer.

Use and maintenance manual Magnus
Pag.13
Rev.1 21/04/2021
residual
risk
description procedure-related information
Risk of
burns When the stove is running, it may reach high temperatures to the touch, especially on its external
surfaces. Take care to avoid burns and use the specic
tools if necessary.
Use the supplied glove to open pellet cover for loading
operations.
DESCRIPTION OF THE STOVE
Intended use
The appliance in question is intended for:
operation allowed fuel forbidden setting
Domestic space
heating by
burning:
pellet Any fuel other
than the
permitted ones.
Residential
or
Commercial
The stove is designed and built to work safely if:
• it is installed by qualied sta󰀨 according to the specic standards;
• it is used within the limits declared in the contract and herein;
• the operating manual procedures are followed;
• routine maintenance is carried out according to the times and
methods set forth;
• extraordinary maintenance is promptly carried out when needed;
• safety devices are not removed and/or bypassed.
📌This stove must be intended for the use it was specifically
designed for.
Reasonably foreseeable incorrect use
Reasonably foreseeable incorrect use is listed below:
• using the stove as an incinerator;
• using the stove with fuel other than pellet;
• using the stove with liquid fuels;
• using the stove with the door open and the ash drawer out.
Any use of the appliance other than intended must be preventively
authorised in writing by the Manufacturer. Without said written
authorisation, the use is considered “improper”. Any contractual
and non-contractual liability of the manufacturer is excluded for
damages to persons, animals or property due to installation and
maintenance adjustment errors and improper use.

Use and maintenance manual Magnus
Pag.14
Rev.1 21/04/2021
Obligations and forbidden actions
Obligations
The user must:
• read this instructions manual before performing any operation
on the stove;
• the appliance must not be used by children under the age of 8 or
by people with reduced physical, sensorial or mental capacities
or without experience or without the necessary knowledge, and
always with supervision;
• do not use the stove improperly, i.e. for uses other than those
described in the “INTENDED USE” paragraph;
• it is strictly forbidden to use liquid fuels;
• keep objects that are not heat and/or ame-resistant at a safe
distance;
• only and exclusively load the stove with pellet with the
characteristics described herein;
• connect the stove to a regulation chimney;
• provide a suitable system for the supply of combustion air (air
intake or intake duct for watertight stoves);
• always perform maintenance with the stove o󰀨 and cold;
• perform cleaning activities at the frequency stated herein;
• use original parts recommended by the Manufacturer.
Forbidden actions
The user must never:
• remove or change the safety devices without authorisation;
• perform operations or manoeuvres of his/her own initiative that
are not part of his/her job description, meaning that he/she might
jeopardise his/her own safety and that of others;
• use fuels other than pellet and those allowed for lighting;
• use the stove as an incinerator;
• use ammable or explosive substances near the stove during
operation;
• use the stove with the door open and/or with the glass ruined or
broken;
• close the combustion air and smoke outlet openings, whatsoever;
• use the stove to dry laundry;
• replace or change some of the stove parts.

Use and maintenance manual Magnus
Pag.15
Rev.1 21/04/2021
Characteristics of the fuel
Wood pellet is a fuel made of pressed wood sawdust, often recovered from processing scraps of carpentries. The material used
cannot contain any extraneous substance such as, for example, glue, lacquer or synthetic substances.
The sawdust, once it has been dried and cleaned from impurities, is pressed using a die with holes: as a result of high pressure, the
sawdust heats up by activating the natural wood binders; this way the pellet maintains its shape even without adding articial
substances.
Wood pellet density varies based on the type of wood and can exceed that of natural wood by 1.5 - 2 times.
The cylinders have a diameter of 6 mm and a variable length between 10 and 40 mm.
Their density is equal to approximately 650 kg/m3. Due to their low water content (< 10%) they have a high energy content.
The UNI EN ISO 17225-2:2014 standard (that replaces the EN PLUS standard) denes pellet quality by specifying three classes: A1,
A2 and B. Maintain fuels and other ammables at a suitable distance.
Ravelli recommends using wood pellet classied A1 and A2 according to the EN ISO 17225-2:2014 standard, or certied DIN PLUS
(more restrictive than the A1 class) or ONORM M 7135. Pellet may be light or dark coloured, it is normally bagged into bags that show
the name of the producer, the main characteristics and classication according to standards.
📌Pellets must be transported and stored in a dry area. Upon contact with humidity they swell and become unusable
📌It is therefore necessary to protect them from humidity, both during transport and during storage.
Non-permitted fuels
We recommend not using the following materials as fuel:
• wood
• treated wood (painted, lacquered, glued wood etc.);
• sawdust or chips
• liquid fuel
• coal or other fossil fuels
• plastic and derivatives
• treated paper and cardboard
• waste
• fuels that release toxic or polluting substances
Using these fuels, on top of being forbidden due to the emission of polluting and harmful substances, causes the stove to deteriorate
more rapidly and debris to accumulate in the stove and in the smoke evacuation system, thereby reducing performance and safety.
📌The gases produced by these fuels are dangerous for the environment and for your health!
📌Using fuel that is not compliant with the above will void the warranty.

Use and maintenance manual Magnus
Pag.16
Rev.1 21/04/2021
TECHNICAL CHARACTERISTICS
U Magnus
Energy efficiency class - - A+
Heating input reduced - nominal kW 7,5 - 16,1
Heating output reduced - nominal kW 7,0 - 14,4
Red. - Nom. Yield % 93,0 - 89,4
Hourly consumption kg/h 1,6 - 3,3
Loading interval h 20 - 42
Max. heating volume m3345
CO at 13% of O2% 0,051 - 0,002
mg/m3 633 - 25
OGC at 13% of O2mg/m3 2 - 2
NOXat 13% of O2mg/m3 118 - 125
PM at 13% of O2mg/m3 39 - 12
Smoke temperature °C 88 - 165
Smoke ow g/s 7 - 11,3
Minimum draft Pa - mbar 10 - 0,1
Electrical connection Hz - V 230 - 50
Electrical power consumption max. W 650
Electrical power consumption reduced - nominal W 72 - 121
Stand-by electrical consumption W 2,3
smoke air inlet Ø mm 60
smoke outlet pipe Ø mm 100
Hopper capacity kg 65
Seasonal energy e󰀩ciency % 77,9
Type of room temperature control with electronic room temperatu-
re control plus week timer
Other control options with distance control option
The data shown here is provided as a guideline and is not binding, and may change based on what type and quality of wood is used.
Ravelli reserves the right to make any changes in order to improve product performance.

Use and maintenance manual Magnus
Pag.17
Rev.1 21/04/2021
Measurements
Unit of
measurement
Magnus
Height mm 1351
Width mm 1035
Depth mm 663
Weight kg 115
Technical diagram Magnus
1000
470 505
1035
880
1354
PORTA REVERSIBILE DX E SX
1035
Ø80 CANALIZZAZIONE
Ø80 CANALIZZAZIONE
Ø80 CANALIZZAZIONE
391,5
+
30 0
505
48,55
62
457
668
KIT RUOTE PER MOVIMENTAZIONE
DA SMONTARE PER FISSAGGIO
226
CARICO PELLET
REVERSIBILE DX O SX
USCITA FUMI Ø100
POSIZIONE REGOLABILE A 180°
COMPATTATORE CENERE
REVERSIBILE
767
148,5
160
50 ENTRATA ARIA
316
310
VALVOLA ANTISCOPPIO
E ISPEZIONE
MISURE CON CORNICE PROFONDA
CODICE K0069AZ00
Via Kupfer,31 25036 Palazzolo S/O
- BRESCIA - ITALY
MONOBLOCCO MAGNUS
CODICE DISEGNO / REV
AICO S.p.a.
TOLLERANZE GENERALI SECONDO LA CLASSE UNI EN 22768-mK
GENERAL TOLERANCES AS PER UNI EN 22768-mK
STATO
FORMATO
TUTTE LE QUOTE MANCANTI SONO DA
RICAVARE DAL MODELLO 3D
ALL THE MISSING MEASUREMENTS CAN
BE FOUND IN THE 3D MODEL
SCALA
DISEGNATO
MASSA
CONTROLLATO DATA
GRUPPO DI APPARTENENZA TIPOLOGIA
FOGLIO
1:15 A3
M0001JR00
Assieme Assemblato
-
V.Bertanza
Proprietà della Società AICO S.p.A. Senza autorizzazione scritta della stessa, il presente
disegno non potrà essere utilizzato per la costruzione dell’oggetto rappresentato né venire
comunicato a terzi o riprodotto. La Società proprietaria tutela i propri diritti a rigore di legge.
All proprietary rights reserved by AICO S.p.A. This drawing shall not be reproduced or in any
way utilized for the manufacture of the component of unit herein illustrated and must not be
released to other parties without written consent. Any infringement will be legally pursued.
227.721 Kg
DENOMINAZIONE
1 / 3

Use and maintenance manual Magnus
Pag.18
Rev.1 21/04/2021
Main parts
element element
A Combustion chamber door D Control panel
B Ashes drawer E Combustion chamber
C Pellet cover F Brazier
Description of operation
Ravelli Magnus are appliances for domestic heating powered by wood pellets with automatic loading. They are suitable for use as a
secondary heating system or as a support for the main heating system.
The heat generated by the combustion of the pellets is diffused in the installation room thanks to the ventilation system as well as by
radiation and natural convection. Thanks to the ducts it is possible to heat other rooms.
The stove is controlled by an electronic control unit that manages the start-up, operation and shutdown phases and also includes
many other functions for control, programming and safety.
The user can choose the operating power from 5 levels, or set the temperature to be maintained in the rooms. In this case the stove
will manage the power to ensure maximum comfort. Among the functions of the electronic control unit there is also that of being able
to program the stove’s start-up and shutdown by setting the weekly chronothermostat.
All this can be done comfortably from the sofa using the handheld remote control.
FUNCTION DESCRIPTION
Ventilation Adjustable from 1 to 5
Automatic
Ducting Double ducting
Manual or automatic (RFS)
Fire pot With automatic cleaning system
Chronothermostat Weekly
4 programs
RDS system Not available
Thermal reset Automatic
A A
B B
C C
D D
E E
F F
G G
H H
J J
K K
L L
M M
N N
P P
R R
T T
24
24
23
23
22
22
21
21
20
20
19
19
18
18
17
17
16
16
15
15
14
14
13
13
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
DISEG.
VERIF.
APPR.
FABB.
Qual.
SE NON SPECIFICATO:
QUOTE IN MILLIMETRI
FINITURA SUPERFICIE:
TOLLERANZE:
LINEARE:
ANGOLARE:
FINITURA:
INTERRUZIONE
BORDI NETTI
NOME
FIRMA
DATA
MATERIALE:
NON SCALARE DISEGNO
REVISIONE
TITOLO:
N. DISEGNO
SCALA:1:5 FOGLIO 1 DI 1
A0
PESO:
M0001JR00
D
B
A A
B B
C C
D D
E E
F F
G G
H H
J J
K K
L L
M M
N N
P P
R R
T T
24
24
23
23
22
22
21
21
20
20
19
19
18
18
17
17
16
16
15
15
14
14
13
13
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
DISEG.
VERIF.
APPR.
FABB.
Qual.
SE NON SPECIFICATO:
QUOTE IN MILLIMETRI
FINITURA SUPERFICIE:
TOLLERANZE:
LINEARE:
ANGOLARE:
FINITURA:
INTERRUZIONE
BORDI NETTI
NOME
FIRMA
DATA
MATERIALE:
NON SCALARE DISEGNO
REVISIONE
TITOLO:
N. DISEGNO
SCALA:1:5 FOGLIO 1 DI 1
A0
PESO:
M0001JR00
E
F
A
C

Use and maintenance manual Magnus
Pag.19
Rev.1 21/04/2021
Automatic cleaning system
The stove is equipped with atuomatic brazier cleaning system. This means that there is no need to carry out daily manual cleaning
of the brazier or every time the stove is lit. The automatic cleaning system is activated every time the stove is lit and after 6 hours of
continuous operation. The cleaning cycle, which involves shutting down, automatic cleaning and restarting the stove, takes about
10 minutes. During this period the heating is guaranteed by the heat accumulated by the appliance itself.
Note: the times indicated are those set by default by the Manufacturer.
Recharge the fuel
⚠ Use only wood pellets, the characteristics shown in this manual.
⚠ During pellet loading prevent the pellet bag from coming into contact with hot surfaces.
📌It is not recommended to empty the pellet bag directly into the hopper to avoid depositing wood sawdust on the bottom of
the hopper.
To load the pellets inside the hopper, proceed as described below:
step
1 Open the pellet hopper cover
2 Pour the pellets into the hopper
3 Close the pellet hopper cover
When the pellet is running out, the signal appears on the display thanks to the sensor with which the fireplace is equipped.
User training
Once installation is complete, the user must always be fully trained in the functions and characteristics of the stove by the technician
authorized by Ravelli to ensure optimal and safe use.
The training should cover the following topics:
• Description of the stove, its operation and basic settings
• How to turn the stove on and off safely
• Fuel storage and refilling
• What to do in the event of an alarm, in particular that of “no ignition”
• How to clean the stove correctly and the importance of performing it on a regular basis
• It is advisable to schedule the first annual maintenance

Use and maintenance manual Magnus
Pag.20
Rev.1 21/04/2021
Safety devices
The stove has been designed and equipped with safety systems to minimize user risks.
It is equipped with the safety devices listed in the following table, which also intervene in case of failure of the electronic board.
Element Description
Pellet tank thermostat If the temperature exceeds the set safety value, it immediately stops the pellet loading
motor and the stove is automatically switched o󰀨; to restart it, it is necessary to wait until
it has cooled down.
Pressure switch If the pressure in the smoke outlet duct is too high (a sign that the smoke evacuation sys-
tem is obstructed) it immediately stops the pellet loading motor and the stove switches off
automatically.
Pressure switch for closing
combustion chamber door
If the door of the combustion chamber is not properly closed, it immediately stops the
brazier cleaning system; if it is not closed within 60 seconds, the stove switches off auto-
matically.
Electrical safety In case of failure of the electrical components or wiring, the fuse and grounding keep the
appliance safe. It is necessary that the electrical system of the house is up to standard,
equipped with a grounding circuit and all the safety systems required by the standards.
It should be noted that the stove’s operating program has been designed to stop stove operation in the event of malfunctions:
Anomalies Description
Temperature in the combustion
chamber
If the temperature probe in the combustion chamber detects temperatures that are too
high or too low, the stove is switched o󰀨 and the relative alarm is displayed.
Flue gas temperature If the temperature probe at the smoke outlet detects temperatures that are too high, the
stove is switched o󰀨 and the relative alarm is displayed.
Smoke fan break If the fan stops, the electronic board blocks the supply of pellets and the alarm is dis-
played.
Gear motor failure If the gear motor stops, the appliance switches off safely.
Temporary power failure If a power failure occurs during operation, when the power returns the temperature in the
combustion chamber is checked and, if necessary, the stove goes into cooling mode.
No ignition If no ame develops during the ignition phase, the stove goes into alarm.
⚠ It is forbidden to tamper with the safety devices. Restarting the product is only possible after eliminating the cause that
caused the intervention of the safety system. To understand which anomaly occurs, consult this manual which explains,
depending on the alarm message that the device displays, how to intervene on it.
⚠ If the problem persists, contact the Support Service.