Raw thrills Super bikes User manual

OPERATOR’S

MANUAL

•Failure to properly operate this machine could result in malfunction or accident, so

please read this manual carefully before commencing operation. Be sure to

operate the machine as described in this manual.

•Keep this manual available and ready for use when necessary.

•If the machine fails to function correctly, immediately turn off the machine and

contact your local distributor. ( 60 Day Warranty, from date of purchase )

April 26, 2006

Table of contents

Safety

Warnings, Cautions & Notices.........………4-5

Setup & Operation

Product Specifications..............................6

Inspection & Installation…………………..7

Seat assembly & Power Up ……………..8

Networking………………………………...9-10

Diagnostics, Audits & Adjustments

Diagnostic Menu System......................11

Menu Navigation...................................11

Main Menu ............................................11

Diagnostics & Tests Menu

Switch Test............................................12

Dipswitch Test.......................................13

Sound Test............................................13

Monitor Test..........................................14

Lamp Test.............................................14

L.E.D. Test............................................15

Coin Meter Test.....................................15

Watchdog Tests Menu......................... 16

Game Audits Menu

General 1 Audits Menu.........................17

General 2 Audits Menu.........................17

Course Audits ......................................18

Course Wins Audit ................................18

Placings Audit .......................................18

Vehicles Audit .......................................19

Riders Audit...........................................20

Upgrades Audit .....................................20

Tunes Audit...........................................21

Stunts Audit...........................................21

Adjustments Menu

Price Menu............................................22

Money Unit Menu..................................23

Coin Value Menu...................................23

Coin Per Bill Pulse Menu......................24

Coin Per Credit Menu............................24

Credit To Start Menu.............................25

Free Play Menu.....................................26

(Chapter 3. Diagnostics Audits & Adjustments continued)

Credit To Continue Menu................26

1st Place Free Race Menu..............26

Multi-Play Free Race Menu............27

Start Time Bonus Menu..................27

Checkpoint Time Bonus Menu .......28

Attract Audio Menu.........................28

Game Difficulty Menu .....................29

Max Credits Menu...........................29

Max Game Length Menu................30

Auto Pilot Menu ..............................31

High Score Reset Menu..................31

Utilities Menu

CRC Check Menu ...........................32

Clear Credit Menu...........................32

Clear Audit Menu.............................33

Clear High Scores Menu.................33

Clear Player Stats Menu.................34

Default Adjustments Menu..............34

Factory Restore Menu...……………35

Calibration Menu............................35

Volume Menu………. ...…………….36

Attract Volume Menu ...………….....36

Maintenance, Wiring & Troubleshooting

Troubleshooting Guide.................….37

Hard Drive Recovery........................38

BIOS Power Management Setting....39

Monitor Adjustments.........................40

Cabinet Wiring.............................41-42

Troubleshooting Notes

Parts, Exploded Assembly Diagrams

April 26, 2006

For Parts or Service contact your local Distributor or:

Betson Enterprises

303 Paterson Plank Road

Carlstadt, New Jersey

Main Phone: (201) 438-1300

Toll Free Phone: (800) 524-2343

Part Phone: (800) 828-2048

CAUTION:

•The specifications of this product are subject to change without notice for reasons such

as performance.

•The content of this game, its main devices and design are protected under each federal

law concerning patent, copyright and other intellectual properties.

•Unauthorized reproduction of this document or any of its contents is strictly forbidden.

April 26, 2006

Safety Instructions

Safety instructions apply to operators and service personnel. Read these instructions before preparing the video

game machine for play. Other safety instructions appear throughout this manual.

WARNING: TRANSPORTING THE VIDEO GAME MACHINE (VGM).

The VGM contains glass and fragile electronic devices. Use appropriate care when transporting. Avoid rough

handling when moving the VGM.

WARNING: DISCONNECT POWER.

Always turn the power OFF and unplug the VGM before attempting service or adjustments unless otherwise

instructed. Installing or repairing components with the power switched ON can damage the components an void

warranty.

WARNING: GROUND GAMES.

Avoid electrical shock! Do not plug in the VGM until you have inspected and properly grounded it. Only plug into a

grounded, three-wire outlet. Do not use a “cheater” plug, or cut off the ground pin on the line cord.

WARNING: AVOID ELECTRICAL SHOCKS.

This VGM does not utilize an isolation transformer. Internal cabinet AC is not isolated from the external AC line.

WARNING: HANDLE FLOURESCENT TUBE AND CRT WITH CARE.

If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly eight feet or more from

the implosion.

WARNING: CHECK POWER SELECTOR, LAMP.

Set the 115/230 VAC selector switch on the power supply for the correct line voltage on the installation site. Verify

that the fluorescent lamps are rated for the proper line voltage.

WARNING: USE PROPER FUSE.

Avoid electrical shock! Replacement fuses must be identically rated to the original fuse!

WARNING: ATTACH CONNECTORS PROPERLY.

Be sure all connectors mate properly. If connectors do not slip in easily, do not force them. Connectors are often

keyed and only connect one way. Check for correct orientation.

WARNING: USE EXTREME CARE WHEN HANDLING PC.

The PC contains sensitive components such as a hard drive. Do not handle roughly. Call your distributor before

servicing PC internal components. Ask about warranty information as it relates to the PC.

April 26, 2006

WARNING: HAZARD TO EPILEPTICS.

A very small portion of the population has a condition, which may cause them to experience

epileptic seizures or have momentary loss of consciousness when viewing certain kinds of

flashing lights or patterns that are present in our daily environment. These persons may

experience seizures while watching some kinds of television pictures or playing certain video

games. Peoples who have not had any previous seizures may nonetheless have an undetected

epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g.,

seizures or loss of awareness), immediately consult your physician before using any video

games.

We recommend that parents observe their children while they play video games. If you or your

child experience the following symptoms: dizziness, altered vision, eye or muscle twitching,

involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE

IMMEDIATELY and consult your physician.

April 26, 2006

Setup and Operation

Product Specifications:

OPERATING REQUIREMENTS

ELECTRICAL POWER

Domestic 120VAC @ 60 Hz, 5 amps

Foreign 240VAC @ 50Hz, 2.5 amps

TEMPERATURE

32° F to 100°F

(0°C to 38°C)

HUMIDITY

Not to exceed 95% relative humidity.

27-INCH SITDOWN MODEL MAIN CABINET SHIPPING DIMENSIONS

Height = 87 inches (220.98 cm)

Depth = 48 inches (80.01cm)

Width = 36 inches (91.44cm)

27-INCH SITDOWN MODEL MAIN CABINET SHIPPING WEIGHT

Weight = 495 lbs. (224.53 Kg)

27-INCH SEAT SHIPPING DIMENSIONS

Height = 54 inches (137.16 cm)

Depth = 75 inches (190.5 cm)

Width = 39 inches (99.06 cm)

27-INCH MODEL SEAT SHIPPING WEIGHT

Weight = 125 lbs. (57.04Kg)

April 26, 2006

INSPECTION AND INSTALLATION

WARNING: Use extreme care when moving or servicing the game cabinet. Don’t plug in the game until you have

read this manual.

Please check the following after the game after the game has been removed from its shipping crate and placed in

a suitable play or service area.

Make sure that the game cabinet is level. Adjust the casters as needed.

1. Check the AC line cord for any visible signs of damage to the plug or line cord insulation.

2. Check for possible shipping damage to the following:

•Player interfaces: seat, handlebars, buttons, keypad and brake and shift levers.

•Seat assembly.

•Monitor glass.

•Cabinet backdoor.

•Cabinet coin door.

•Cabinet and seat decals.

3. Remove the coin door key from the coin return chute.

4. Open the top coin door and locate the key for the backdoor and the cashbox.

5. Locate hardware kit. Included are: tamper proof tool kit, crossover network cable, line cord and seat

hardware fasteners (8 sets)

6. Remove the backdoor the backdoor from the cabinet and visually inspect the electronic components.

7. Verify that all connectors are secure and that the bottom of the cabinet is free of loose objects, which may

have possibly come loose during shipping.

April 26, 2006

Seat Assembly Procedure

WARNING: The cabinet is top heavy. Install only on level surface. Use the leg levelers to make sure the cabinet

and seat are stable. Do not push against plastic parts during movement. Raise the shipping screws all the way up

before game can be played.

1. Roll the cabinet and seat to the intended installation location. Make sure setup up area is suitable for

your game operation. Allow for at least 3 – 4 feet of clearance from the bike for player and public traffic

convenience and safety during game play. Allow for enough clearance from the backdoor for proper

airflow. Do not block the air intake or exhaust vents located in the back of the game.

2. Position the seat base assembly so that it is aligned with the mounting holes in the lower main cabinet

housing the monitor. Push the seat assembly forward to meet the mounting holes and find the four ¼ -20

x 2” bolts and large flat washers provided in the hardware bag inside the cashbox. Make all necessary

cable connections and ensure no wires are pinched during the attachment process.

3. Adjust all levelers until both cabinet and seat are flush and parallel with each other.

4. Tighten the screws firmly using a T-27 Torx tool.

5. Raise the shipping screws located under the bike assembly. One is located on each underside of the

bike. This keeps the bike stable during transport or service. Raise both shipping screws all the way up

without removing it completely out. This ensures safe keeping for future use.

Power Up Procedure

1. Plug the game line cord into an appropriately wired and fused AC receptacle.

2. Locate the game AC main switch to the bottom left side on back of the game cabinet.

3. Turn the switch to the ON position.

4. The game attract feature will begin after the game is finished loading- approximately 1 minute.

5. Proceed to Switch Test of this document and verify proper game operation.

April 26, 2006

Game Networking

NOTICE: To link the two games together, use the crossover cable provided in the spare parts bag. Use of

another cable other than the one shipped with the game could void warranty or cause games not to link. Use

network cables, which are at least CAT5 grade.

Networking Considerations

Each FNFSB game ships with a cross over cable for linking 2 games. Optionally, a hub and network patch cords

can be installed to link 3 or more games.

Take care to protect exposed game wiring from general foot traffic around the game. Use a conduit or wire way to

protect the cables as needed.

Please mark linking cables for your game if other such cables are in the vicinity to avoid confusion. Network

cables are not marked or coded.

Avoid routing the network cables near sources of heat, moisture or electrical energy such as neon lights,

compressor motors, transformers etc.

Networking Setup 2 Games

1. Remove the cross over network cable from the parts bag located inside the cashbox.

2. If you are linking two games connect each end of the cable to the network jack behind each PC.

(Back of computer)

CONNECT NETWORK CABLE HERE

3. Neatly route the cable through the notch on the back of the cabinet.

4. Use the Dipswitch diagram below for enabling link feature and master/slave configuration. The Dipswitch

is located on the JAMMA I/O board. The JAMMA I/O board is mounted inside the back of the cabinet.

5. Reset all games simultaneously and verify that link is successful. If not, check the Dipswitch settings and

make sure that the network cable is connected properly and secured. Please refer to the troubleshooting

guide in this manual for more details.

DIP SWITCH DIAGRAM:

DIP SW# SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8

Player1 / MASTER OFF OFF

OFF * ON

Player 2 ON OFF

OFF * ON

April 26, 2006

Networking Setup 3 - 8 Games

1. Prepare network hub with enough ports and correct number of patch cables to support the number of games

that you plan to link. Network hub and cables are not shipped with the games and are sold separately.

2. Connect each end of the cable to the network jack behind each PC.

3. Connect each of the opposite ends of the cables to the network hub. Please refer to the network hub manual

for other networking considerations specific to your hub.

(Back of computer)

CONNECT NETWORK CABLE HERE

1. Neatly route the cable through the notch on the back of the cabinet.

2. Use the DIPswitch diagram below for enabling link feature and master/slave configuration. The DIPswitch is

located on the JAMMA I/O board. The JAMMA I/O board is mounted inside the back of the cabinet.

3. Reset both games simultaneously and verify that link is successful. If not, check the DIPswitch settings and

make sure that the network cable is connected properly and secured. Please refer to the Game

Troubleshooting Guide on this manual for more details.

4. Reset all games simultaneously and verify that link is successful. If not, check the Dipswitch settings and

make sure that the network cable is connected properly and secured. Please refer to the troubleshooting guide in

this manual for more details.

DIP SWITCH DIAGRAM:

DIP SW# SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8

Player1 / MASTER OFF OFF

OFF ON

Player 2 ON OFF

OFF ON

Player 3 OFF ON OFF ON

Player 4 ON ON

OFF ON

Player 5 OFF OFF ON ON

Player 6 ON OFF ON ON

Player 7 OFF ON ON ON

Player 8 ON ON ON ON

April 26, 2006

Adjustments, Audits & Diagnostics

Locate the Service Button Panel. It is mounted

inside the coin door area on top of the cash box

vault. Press the TEST button to access the

Test Menu.

Menu Navigation:

Button Action

Test Enter Operator Screen

Start Button Enter/Select Item Sub-Menu

Vol. (+) or View Button Scroll up thru Menu items

Vol. (-) or Tunes Button Scroll down thru Menu items

Service or Shift Lever Exit to previous Menu

MAIN MENU

The Test Main Menu appears when the TEST button is pressed.

Test Main Menu

Diagnostics

Game Audits

Adjustments

Utilities

Calibration

Volume

Attract mode volume

Exit

Press Volume +/- or View/Tunes to

Select. Press Test or Start to Activate

Press Service or use Shift Lever to Exit.

Version Information

Version

OS Version

Exe Version

Date

Time

Machine I.D.

Jusb vers. Release 4

TEST VOL (+)

SERVICE VOL (-)

April 26, 2006

Diagnostics Menu System

From the Main Menu, select Diagnostics and enter to view options.

Switch Test

From the Diagnostics select and enter Switch Test. Verify proper switch input function using this menu. Each

switch activated will be indicated on the test screen in corresponding yellow box and will be accompanied by a

switch active sound indicator. Verify pot value for min, center and max are correct. If not, proceed to Calibration

section of this manual. Press and hold the Service Button for three seconds to return to the Diagnostics Menu.

Diagnostics Menu

Switch Test

DIP Switch Test

Sound Test

Wheel Test

Monitor Test

Lamp Test

LED Test

Coin Meter Test

Watchdog Test

Exit

Diagnostics

Press Volume +/- or View/Tunes to

Select. Press Test or Start to Activate

Press Service or use Shift lever to Exit

SWITCH TEST

Lean/Throttle/ Info

Input Device Pot Value Min Center Max

Lean

Throttle

Keypad Info

1 2 3

4 5 6

7 8 9

* 0 #

TVVS Info

Service credit

Volume up (+)

Volume Down (+)

Test

Button Info

View

Start

Tunes

Shift

Handbrake

Coin 1

Coin 2

Bill Acceptor

Hold Service or Start to Exit

April 26, 2006

DIP Switch Test

From the Diagnostics Menu select and enter DIP Switch Test. Verify correct DIPswitch settings. Please refer to

Appendix n. Press the Tunes Button to return to Diagnostics Menu.

Sound Test

From the Diagnostics Menu select and enter Sound Test. Verify that marquee, cabinet and seat sound volume

and quality are good. Press the Tunes Button to return to Diagnostics Menu

Error!

Press Volume +/- or View/Tunes to

Select. Press Test or Start to Activate

Press Service or use Shift lever to Exit

Sound Test

Current Music Track:

Current Sound Effect:

Note:

Use Pan functions to test

left/right speakers separately.

Use 100-1Khz test to verify

subwoofer sound quality.

Go to Volume section to adjust

sound level.

DIP SWITCH VALUES

VALUE STATE SWITCH

ON 8 - NET ENABLED

ON 7 - JAPANESE ENABLED

ON 6

ON 5

ON 4

ON 3 -|

ON 2 -| MACHINE ID 1-8

ON 1 -|

Sound Test Menu

Change Music

Change Effect

Play 100Hz Test

Play 1000Hz Test

Set Pan Center

Set Pan Left

Set Pan Right

Exit

April 26, 2006

Monitor Test

From the Audio/Video Options menu, select and enter Color Bars & Purity. Verify correct color and purity for

Red, Blue and Green screens. Use the convergence screen to also verify linearity. See Appendix n.

Color Bar

Convergence

Lamp Test

From the Diagnostics Menu select and enter Lamp Test. Use View1 or View 3 to select the lamp and press Start to

activate that lamp. Verify that ALL lamps are working.

Lamp Test Menu

ALL Lamps ON

ALL Lamps OFF

View Lamp ON

Start Lamp ON

Tunes Lamp ON

Exit

Lamp Test

Press Volume +/- or View/Tunes to

Select. Press Test or Start to Activate

Press Service or use Shift lever to Exit

•White Screen

•Red Screen

•Green Screen

•Blue Screen

Purity Screen

Note:

Lamp function could also be

verified using Switch Test.

Please check the coin door

lamps as part of your game

diagnostic check.

April 26, 2006

L.E.D. Test

From the Diagnostics Menu select and enter L.E.D. Test. Advance the meter once using by pressing Start.

Press the Tunes Button to return to Diagnostics Menu. Verify that all LED’s are working.

Coin Meter Test

From the Diagnostics Menu select and enter Coin Meter Test. Advance the meter once using by pressing Start.

Press the Tunes Button to return to Diagnostics Menu.

Press Service or Tunes to Exit

Hit Test/Start to advance coin meter.

LED Test

LED Test Menu

All LED’s On

All LED’s Off

Speedo Cycle

Brake Cycle

Tail pipe Cycle

Exit

LED Test

Press Volume +/- or View/Tunes to

Select. Press Test or Start to Activate

Press Service or use Shift lever to Exit

April 26, 2006

Watchdog Test

From the Diagnostics Menu select and enter Watchdog Test. The game will reset in approximately 6 seconds.

The watchdog feature allows the PC to monitor normal game software and hardware operation.

Game Audits

From the Main Menu, select Game Audits and enter to view options.

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Riders

Upgrades

Tunes

Stunts

Exit

Game Audits

Press Volume +/- or View/Tunes to Select.

Press Test or Start to Activate

Press Service or use Shift lever to Exit

Hit Test/Start to begin.

PC will reset in 10 seconds…..

***Hit Test/Start to Cancel***

Note:

•Use game audit screens to

assess game performance.

•Use information to

determine options such as

game difficulty and free

game award to maximize

game earnings.

•Use information to detect

possible intermittent

problems.

April 26, 2006

General 1 Audits

From the Audits Menu, select General 1 and enter to view general game statistics. Press the Tunes Button to

return to Main Menu.

General 2 Audits

From the Audits Menu, select General 2 and enter to view additional general game statistics. Press the Tunes

Button to return to Main Menu.

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Upgrades

Tunes

Stunts

Exit

Press Volume +/- or View/Tunes to Select.

Press Test or Start to Activate

Press Service or use Shift lever to Exit

General Audits

Auto Games

Manual Games

Low Cam Time

Med Cam Time

High Cam Time

Coindrops

Coindrops Slot 0 Left

Coindrops Slot 1 Right

Coindrops Slot 2 DBV

Current Credits

Current Coins

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Upgrades

Tunes

Stunts

Exit

General Audits

Time Game On

Time Game Played

Average Time per

Game

Games Played

Games Started

Game Continued

Game Timed Out

Free Games

PIN Games

Link Games

Boot Ups

Test Mode Entries

Unfinished Games

Press Volume +/- or View/Tunes to Select.

Press Test or Start to Activate

Press Service or use Shift lever to Exit

April 26, 2006

Course Audits

From the Audits Menu, select Courses and enter to view individual information on each course. View how many

times each course is selected, as well as its popularity by overall percentage. Press the Tunes Button to return to

Main Menu.

Course Wins Audit

From the Audits Menu, select Courses Wins and enter to view individual win and overall percentage information

on each course. Press the Tunes Button to return to Main Menu.

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Riders

Upgrades

Tunes

Stunts

Exit

Press Volume +/- or View/Tunes to Select.

Press Test or Start to Activate

Press Service or use Shift lever to Exit

Course

Wins/Percentage

Switzerland

Hawaii

Shanghai

Florida

Baja

Chicago

Detroit

Sturgis

Monaco

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Upgrades

Tunes

Stunts

Exit

Press Volume +/- or View/Tunes to Select.

Press Test or Start to Activate

Press Service or use Shift lever to Exit

Course

Selects/Percentage

Switzerland

Hawaii

Shanghai

Florida

Baja

Chicago

Detroit

Sturgis

Monaco

April 26, 2006

Placings Audit

From the Audits Menu, select Placing and enter to view individual count for each standing and percentage

information. Use this information to determine game difficulty adjustments to properly reward players and

maximize game earning performance. Press the Tunes Button to return to Main Menu.

Vehicles Audit

From the Audits Menu, select Vehicles and enter to view individual count for each vehicle selection and

percentage information. Press the Tunes Button to return to Main Menu.

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Riders

Upgrades

Tunes

Stunts

Exit

Press Volume +/- or View/Tunes to Select.

Press Test or Start to Activate

Press Service or use Shift lever to Exit

Vehicle

Selects/Percentage

MONSTER S4R

YZF R-1

RSV 1000

NINJA ZX-10R

VULCAN 800 DRIFTER

MGS-01 CORSA

YZF R-6

PAUL SMART 1000 L.E.

KX-250

WARRIOR

VMAX

SS1000 DS

SXV

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Riders

Upgrades

Tunes

Stunts

Exit

Press Volume +/- or View/Tunes to Select.

Press Test or Start to Activate

Press Service or use Shift lever to Exit

Placings/Percentage

1st Place

2nd Place

3rd Place

4th Place

5th Place

6th Place

7th Place

8th Place

Avg. Place:

Max. Winning Streak:

Max. Lose Streak:

Current Win Streak:

Current Lose Streak:

April 26, 2006

Riders Audit

From the Audits Menu, select Riders and enter to view individual count for each rider selected and percentage

information. Press the Tunes Button to return to Main Menu.

Upgrade Audit

From the Audits Menu, select Upgrade Audit and enter to individual count for each vehicle feature upgrade

selection and percentage information. Press the Tunes Button to return to Main Menu.

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Upgrades

Tunes

Stunts

Exit

Press Volume +/- or View/Tunes to Select.

Press Test or Start to Activate

Press Service or use Shift lever to Exit

Upgrades/Percentage

Decal

Tires

Nitro

Neon

Body

Engine

Upgrade Users:

Audits Menu

General 1

General 2

Courses

Course Wins

Placings

Vehicles

Riders

Upgrades

Tunes

Stunts

Exit

Press Volume +/- or View/Tunes to

Select. Press Test or Start to Activate

Press Service or use Shift lever to Exit

Rider

Selects/Percentage

Studbiker

Youngblood

Bulletproof

Motobiker

Biker

Jaylo

Blonde

Table of contents

Raw Thrills Super Bikes User manual

Popular Video Gaming Accessories manuals by other brands