Document number: 86082-1
Use with: ST290 Instrument System Owner’s Handbook
Date: 15 May 2003
How to set the method of selecting FAVORITE pages
ST290 Data Display FAVORITE pages
You can set the method of selecting FAVORITE pages. This is:
1 s
If you want FAVORITE pages to roll around
automatically, set the time you want each page to be
displayed (from 0.5 s to 20 s)
If you want to select FAVORITE pages manually,
set the value to 0.0
FAVORITE setup
FAVORITE chapter
orUse
1 s
Page 1
Page 2 Page 3
Page 4
Page 5
Page 1
Page 2 Page 3
Page 4
Page 5
Either
Or so the FAVORITE pages roll
around automatically.
Momentary
press
1 s
press
so you manually select
FAVORITE U
ROLLOVER SEC
FAVORITE U
DEPTH FT
SPEED KTS
DEPTH FT
First FAVORITE page
pages using
to set the method of FAVORITE page selection:
Note: The method of FAVORITE
page selection that you choose, will
apply to FAVORITE pages in both
the upper and lower display areas.
D6297-1
ST290 Data Display - quick reference guide
ST290 Data Display FAVORITE pages
The
FAVORITE
chapter gives
quick, easy access
to data you use most often
To see your FAVORITE pages
You can set any number of FAVORITE pages from 1 to 5.
You can allocate any available data to a FAVORITE page.
You can set up the linking between upper and lower FAVORITE pages:
FAVORITE U
DEPTH FT
SPEED KTS
DEPTH FT
APP-WIND STBD
DEPTH FT
COG
DEPTH FT
DTW NM
DEPTH FT
ETA
DEPTH FT
Note: This example shows how to see FAVORITE pages
in the upper display area. The same principles are valid
for the lower display area.
EITHER
OR so the upper and lower display areas as linked FAVORITE
pages, i.e. they change together.
so that you have 5 FAVORITE pages in the upper display area
and another independent 5 FAVORITE pages in the lower
display area.
If the FAVORITE pages do not roll around
automatically, one after the other,
use to manually select pages.
FAVORITE chapter
D6294-1
