Raymarine St290 User manual

Document number: 86074-1
Use with: 81183-1
Date: 1 August 2002
ST290 Graphic Display - quick reference guide ST290 Graphic Display - quick reference guide
Operation
Chapter Select mode
Select
chapter
Select
chapter
Increase parameter value, or
select popup menu value
Decrease parameter value, or
select popup menu value
Edit mode
Select pages in current chapter
Select pages in current chapter
Setting an alarm: Press to set alarm
threshold, or switch alarm off.
Selecting a menu item:
Press when menu item is highlighted.
Normal operation button actions
Increase brightness
Decrease brightness
Lamp Adjust mode
Contrast Adjust mode
Press
Hold down for 1 second
Press
Hold down for 1 second
Press
Hold down
for 1 second
Press
Hold down
1 second
Increase contrast
Decrease contrast
1 secondHold down
Controlling a timer: Press to switch timer
on/off or start/stop timer.
Press
Press
or
or
User setup
If CUSTOM 1 or 2 is selected,
refer to the procedures in
text to set up your system
profile.
Note: Although you can use
only one profile at a time,
you can set up both custom
profiles at this point.
Select either FULL, SAIL,
POWER, CUSTOM 1 or
CUSTOM 2
PROFILE
2 sec
DATA UNITS
Set speed units
Set distance units
Set depth units
Set wind speed units
Set temperature units
Set volume units
Set flow-rate units
EXIT SETUP
TRANSDUCER CAL.
Transducer calibration only
needs to be carried out from
one instrument.
Refer to the chapter text for
structure and procedures.
Normal
operation
2 sec
User Setup
Select Magnetic or True
Select chapter/page
selection method
Set race timer guns 1, 2,
& 3 on or off
Set speed data resolution
Set depth data resolution
Set wind speed data
resolution
DISPLAY OPTIONS
Set distance data resolution
Set date format
Set time format
Set month format
Set remote group
Set position logging interval
Set linked keypad(s)
Set sequence number
Set time offset (from UTC)
Set distance trip counters 1,
2, 3, 4 & 5 on or off
Set button beep on/off
Set pilot popup on/off
Set pilot calibration on/off
Select page to be viewed
when chapter first selected
DISPLAY RESPONSE
Speed
Depth
Heading
Wind angle
Wind speed
XTE
Display update rate
SETUP ACCESS USER SETUP ENTRY
FAVORITES
Set number of Favorite
pages (1 to 5)
Set rollover
Pilot setup
chapters
See handbook
for details.
Available only
if PILOT CAL is
on.
To select the chapter you want
Press 1 sec hold down
PILOT BASIC CAL
PILOT SEATRIAL CAL
PILOT ADVANCED CAL
LAMPS
Set level 2 (%)
Set level 1 (%)
Set level 3 (%)
Set lamps
Allocate instrument to group

Twilight pm
CMG (course made good)
TTG (time to go)
Twilight am
Sunset
FAVORITES
Favorite page 5
Favorite page 4
Favorite page 3
Favorite page 2
Favorite page 1
USER SETUP
Press
for 2 seconds,
to enter User Setup
Depth graph
Depth
Minimum depth
Maximum depth
Offset
DEPTH
Heading graph
Locked heading & steer bar
Heading on next tack
Heading (compass bearing)
HEADING
SPEED
Boat speed
Average speed
Maximum speed
Total log
Trip logs (up to five)
VMG to windward
VMG to waypoint
Boat speed graph
Battery voltage
VESSEL
Rudder angle
Wind direction
Wind speed
DMG
CMG
Latitude
Date
Time
Position log
Status (Fix or No fix)
Satellites tracked
HDOP
GPS
D5675-2
NAVIGATION
Latitude
Longitude
COG (course over ground)
BTW (bearing to waypoint)
DMG (distance made good)
ETA (estimated time of arrival)
XTE (cross track error)
Status
PILOT
Countdown timer
Local time
Local date
Race start timer (gun 1)
Race start timer (gun 2)
Race start timer (gun 3)
Race start timer (count up)
TIMERS
Alarm clock
Stop watch
ENGINE N
Notes:
1. N = engine number
2. A separate ENGINE chapter
is provided for each engine.
Engine log
RPM
Fuel rate
Coolant level
Fuel level
Turbo oil temperature
Engine temperature
Exhaust gas temperature
Battery voltage
Boost pressure
Shallow water
Shallow anchor
Off course
Waypoint arrival
Boat speed high
Boat speed low
ALARMS
ENVIRONMENT
Sea temperature
Tide set
Sunrise
Longitude
SOG (speed over ground)
Waypoint name
BTW (bearing to waypoint)
DTW (distance to waypoint)
Tide rate
Deep water
Deep anchor
AWA (Apparent wind angle) high
AWA (Apparent wind angle) low
AWS (Apparent wind speed) high
AWS (Apparent wind speed) low
TWA (True wind angle) high
TWA (True wind wind angle) low
TWS (True wind wind speed) high
TWS (True wind wind speed) low
To select the chapter you want
Press 1 second
hold down
Note:
This illustration shows the chapter and page structure of an
ST290 Graphic Display Full Profile.
If you use a different profile, the chapters and page structure
may be different.
Rolling road
BTW
DTW
plus one of the following:
VMG TO WP
ETA
SOG
XTE
SPEED
TTG
HEADING
COG
WAYPOINT
Graphic Display Full Profile
WIND
True magnetic wind direction
graph
Relative true wind angle graph
True wind speed graph
Relative apparent wind angle
graph
Apparent wind speed graph
Docking wind relative to
vessel plan view
Wind shift (head & lift)
True magnetic wind direction
True wind speed
Apparent wind speed
Relative apparent wind angle
Relative true wind angle
Beaufort wind force
Cardinal wind direction
Note: PILOT chapter available
only if a Raymarine autopilot
system is connected to ST290

Document number: 86074-1
Use with: 81183-1
Date: 1 August 2002
ST290 Graphic Display - quick reference guide ST290 Graphic Display - quick reference guide
Operation
Chapter Select mode
Select
chapter
Select
chapter
Increase parameter value, or
select popup menu value
Decrease parameter value, or
select popup menu value
Edit mode
Select pages in current chapter
Select pages in current chapter
Setting an alarm: Press to set alarm
threshold, or switch alarm off.
Selecting a menu item:
Press when menu item is highlighted.
Normal operation button actions
Increase brightness
Decrease brightness
Lamp Adjust mode
Contrast Adjust mode
Press
Hold down for 1 second
Press
Hold down for 1 second
Press
Hold down
for 1 second
Press
Hold down
1 second
Increase contrast
Decrease contrast
1 secondHold down
Controlling a timer: Press to switch timer
on/off or start/stop timer.
Press
Press
or
or
User setup
If CUSTOM 1 or 2 is selected,
refer to the procedures in
text to set up your system
profile.
Note: Although you can use
only one profile at a time,
you can set up both custom
profiles at this point.
Select either FULL, SAIL,
POWER, CUSTOM 1 or
CUSTOM 2
PROFILE
2 sec
DATA UNITS
Set speed units
Set distance units
Set depth units
Set wind speed units
Set temperature units
Set volume units
Set flow-rate units
EXIT SETUP
TRANSDUCER CAL.
Transducer calibration only
needs to be carried out from
one instrument.
Refer to the chapter text for
structure and procedures.
Normal
operation
2 sec
User Setup
Select Magnetic or True
Select chapter/page
selection method
Set race timer guns 1, 2,
& 3 on or off
Set speed data resolution
Set depth data resolution
Set wind speed data
resolution
DISPLAY OPTIONS
Set distance data resolution
Set date format
Set time format
Set month format
Set remote group
Set position logging interval
Set linked keypad(s)
Set sequence number
Set time offset (from UTC)
Set distance trip counters 1,
2, 3, 4 & 5 on or off
Set button beep on/off
Set pilot popup on/off
Set pilot calibration on/off
Select page to be viewed
when chapter first selected
DISPLAY RESPONSE
Speed
Depth
Heading
Wind angle
Wind speed
XTE
Display update rate
SETUP ACCESS USER SETUP ENTRY
FAVORITES
Set number of Favorite
pages (1 to 5)
Set rollover
Pilot setup
chapters
See handbook
for details.
Available only
if PILOT CAL is
on.
To select the chapter you want
Press 1 sec hold down
PILOT BASIC CAL
PILOT SEATRIAL CAL
PILOT ADVANCED CAL
LAMPS
Set level 2 (%)
Set level 1 (%)
Set level 3 (%)
Set lamps
Allocate instrument to group