RAYSTAR USB2CAN User manual

1
Smart Display USB2CAN

2
Table of Contents
1Steps for Usage ............................................................................................................................................. 4
1.1 Plug short USB cables to Connection Board........................................................................................ 4
1.2 Connect to Smart Display .................................................................................................................... 4
1.3 Connect to USB2CAN........................................................................................................................... 5
1.4 Plug the "USB to MicroUSB Cable" to USB2CAN module pin housing. ............................................... 5
1.5 Plug the USB header to PC USB socket................................................................................................ 5
1.6 Power On ............................................................................................................................................. 5
1.7 Start the Smart Display........................................................................................................................ 6
2Software for usage ........................................................................................................................................ 7
2.1 Unzip the zip ........................................................................................................................................ 7
2.2 Install the Driver .................................................................................................................................. 7
2.3 Click the next button ........................................................................................................................... 7
2.4 Waiting for the driver install................................................................................................................ 8
2.5 Choose the install button to install STMicroelectronics...................................................................... 8
2.6 Choose the install button to install STMicroelectronics COM port..................................................... 8
2.7 Completing the Driver installation wizard........................................................................................... 9
2.8 Installing control APP for PC that executes the 『RaystarSmartDisplaySetup.vx.x.x.msi』............. 9
2.9 Choose the Next button to next install step........................................................................................ 9
2.10 Choose the Next button used the default installation folder. .......................................................... 10
2.11 Installation Complete. ....................................................................................................................... 10
2.12 Then you can see the APP execution file on your desktop. .............................................................. 11
3Operating the APP....................................................................................................................................... 12

3
Preface
Thank you for purchasing 5” CanTFT Smart Display. Please checkup stuffs as checking list in the
below picture when get delivery demo.set package. Please scan QR-code of splash screen to get the
specification sheet.
USB2CAN Dongle
5”Smart Display
Connection Board
USB short Cable to smart display
USB short Cable to Host
USB to MicroUSB Cable
Smart Display Demo set checking list：
1. Preface printing x 1.
2. Smart Display x 1
3. Connection Board x 1
4. USB2CAN Dongle x 1
5. USB to MicroUSB Cable x 1
6. USB short Cable to smart display x 1
7. USB short Cable to Host x 1

4
1Steps for Usage
1.1 Plug short USB cables to Connection Board
1.2 Connect to Smart Display
Plug the "USB short cable to smart display" to Smart Display pin housing. This pin has a
foolproof socket showing the below photo.

5
1.3 Connect to USB2CAN
Plug the "USB short Cable to Host" to USB2CAN module pin housing. This pin has a
foolproof socket showing the below photo.
1.4 Plug the "USB to MicroUSB Cable" to USB2CAN module pin housing.
1.5 Plug the USB header to PC USB socket
1.6 Power On
Connect the power line to POWER JACK. (PLUG 5.5mm x 2.1mm)(5V/3A) Positive pole of
the power supply is internal.

6
1.7 Start the Smart Display
In the below photo you can see the current scenario when you power on.

7
2Software for usage
2.1 Unzip the zip
You can see the folder have two files like the below photo.
(The file version according to current the latest version)
2.2 Install the Driver
Now enter the 『USB2CanDriver』folder, the below photo, you can see these files.
Executing the『stlink_winusb_install.bat』file to install driver.
2.3 Click the next button

8
2.4 Waiting for the driver install.
2.5 Choose the install button to install STMicroelectronics.
2.6 Choose the install button to install STMicroelectronics COM port.

9
2.7 Completing the Driver installation wizard.
2.8 Installing control APP for PC that executes the 『RaystarSmartDisplaySetup.vx.x.x.msi』
2.9 Choose the Next button to next install step.

10
2.10 Choose the Next button used the default installation folder.
2.11 Installation Complete.