Random Playback
1. Press Play/Pause on the main unit
to start playback.
2. Press to activate random play
back function.
3. Press again to cancel the function.
Remain Time
Press P/prog•display on the main unit
when CD is playing to toggle between
displaying track elapse time and disc
remain time.
(Available in normal playback mode
only)
Bass Boost
Press bass boost repeatedly to select
bass boost I and bass boost II.
Program
This function lets you listen to the tracks
you selected in the order you want. You
can program up to 24 tracks. The CD
player must be in Stop mode.
1. Press and hold P /prog•display to
enter program mode. P icon will appear
in the display.
2. Press or to select the track
to store.
3. Press P/prog•display to confirm your
entry.
4. Repeat steps 2 and 3 to store other
tracks.
5. Press Play/Pause button to listen
to your programming.
Edit Program
To add/edit tracks to the program, enter
stop mode.
1. Press and hold P/prog•display but-
ton to display program information.
2. Press P/prog•display repeatedly to
select the program location to edit.
3. Press or to select the new
track to store into selected memory loca-
tion.
4. Press P/prog•display to confirm your
entry.
5. Press Play/Pause to start pro-
gram playback.
Cancel Program
To cancel your program, press and hold
the mode key when you are in the stop
mode. ERASE will appear in the display.
The program will be automatically can-
celed.
Exit Program mode
To exit program mode, press
P/prog•display in stop mode.
Note : To prevent excessive battery
consumption, the unit switches off
automatically in all modes after 30s
if no key has been activated.
THE CD PLAYER
Resume
When you power off the unit (without
disconnecting power supply), Resume is
automatically activated. It stores the
following settings and modes: Mode
(Repeat/Repeat All/ Random) and EQ set-
ting (Bass Boost). When play mode is on
again, the unit resumes to the settings.
To automatically store current track when
you stop CD play, press STOP button twice.
Skip /Search
Press to skip to the previous track.
Press and hold to search backwards in a
track.
Press to skip to the next track.
Press and hold to search forward in a
track.
Pause
Press Play/Pause on the main unit
again to pause playback. The minutes and
seconds flash when interrupted.
Stop
Press Stop on the main unit.
Lock
Slide control switch on the main unit to
HOLD position to lock the button on the
main unit to avoid accidental activation of
unwanted functions.
The hold icon will show on the dis-
play when the controls are locked.
NOTE: Remember to slide the
CONTROL switch to ON position to
activate the controls again.
Repeating/Intro scan
You can replay the entire CD or one
track as many times as you wish as well
as listen to the beginning of each track for
10 seconds.
Press mode successively to
1. Replay the entire CD .
2. Replay the current track.
3. Play the beginning of each track for 10
seconds.(The number of the track being
played will be displayed and SCAN will
display.)
4. Press again to de-select the function.
THE CD PLAYER
EN EN
6
5