Ready Rack EW30 User manual

DIMENSIONS OF THE WASHER:
LENGTH: 29.0” (L)
DEPTH: 32.0” (D)
HEIGHT: 40.8” (H)
DEPTH WITH DOOR OPEN: 53.9”
WEIGHT: 221 lbs
SHIP WEIGHT: 300 lbs
PERMISSIBLE WATER PRESSURE: 20 - 120 psi
MAX SPIN - 100 G Force
POWER SUPPLY: 120 V~ 60 Hz
READY RACK EXTRACTOR
OWNER’S MANUAL
EW30
Extractor
MEETS NFPA
1851: 2020
REQUIREMENTS

2PRODUCT FEATURES
PRODUCT FEATURES
DIRECT DRIVE SYSTEM
The advanced brushless DC motor drives the drum directly without using a belt and pulley.
TILTED DRUM AND EXTRA LARGE DOOR OPENING
The tilted drum and extra large opening makes it possible to load and unload clothing more easily.
ULTRA CAPACITY
The larger drum enables more tumbling action and greater centrifugal force, but also less tangling
and wrinkling of the laundry.
SEE-THROUGH DOOR AND BIG DOOR
You can see the laundry throughout the cycle.
MAGNETIC DOOR PLUNGER
Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will
promote air circulation and allow the interior of the machine to dry. To use this feature, after the load
has been removed, do not close the door completely. When the magnetic door plunger comes into
contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of
the washer to dry.
STAINLESS STEEL DRUM
Stainless steel drum offers extreme durability.

3
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of re or
explosion, electric shock, or to prevent property damage, injury to persons, or death.
Your Safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazardsthat can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER,WARNING or
CAUTION.
These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed.

4IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of re or
explosion, electric shock, or to prevent property damage, injury to persons, or death.
GROUNDING INSTRUCTIONS
This appliancemust be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING
Improper connection of the equipment-grounding conductor canresult in risk of electric shock. Check with a
qualied electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not
modify the plug provided with the appliance.If it does not t the outlet, have a proper outlet installed by a
qualied electrician. Failure to follow these warnings can cause serious injury, re, electric shock, or death.
BASIC SAFETY PRECAUTIONS
WARNING
To reduce the risk of re, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following.
•Before use, the washer must be properly installedas
described in this manual.
•Do not wash articles that havebeen previously cleaned
in, washed in, soakedin, or spotted with gasoline,dry
cleaningsolvents, or other ammable or explosive
substances, as they give off vapors that could ignite or
explode.
•Do not addgasoline,dry cleaning solvents, or other
ammable or explosivesubstancesto the wash water.
These substances give off vapors that could ignite or
explode.
• Under certain conditions, hydrogen gas may be produced
in a hot water system that has not been used for 2
weeks or more. HYDROGENGAS IS EXPLOSIVE. If the
hot water system has not been used for such a period,
before using the washer, turn on all hot water faucets
and let the water ow from each for several minutes.
This will release any accumulated hydrogen gas. As the
gas is ammable, do not smoke or use anopen ame
during this time.
•Do not allow children to playon or in the washer. Close
supervision of children is necessary when the washer is
used near children.
•Before the washer is removed from service or
discarded,remove the door to prevent children from
climbing inside.
•Do not install or store the washer where it will be
exposed to the weather or freezing temperatures.
•Do not tamper with controls.
•Do not repair or replace any part of the washer or
attempt any servicing other than asdescribed in this
manual. We strongly recommend that any service be
performed by a qualied technician.
•See InstallationInstructions for grounding requirements.
•ALWAYS follow the fabric care instructions suppliedby
the garment manufacturer.
•Do not placeitems exposed to cookingoil in your
washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a load
to catch re.
• This washer is not designed for maritime use or for
mobile installations such as in RVs,aircraft, etc.
•Turn off the water faucets and unplug the washer if the
machine is to be left for an extended period of time,
such as during vacations.
• Packagingmaterial can be dangerous for children. There
is a risk of suffocation! Keep all packagingfrom children.
•Always check the inside of the washer for foreign
objects before loadinglaundry. Keepthe door closed
when not in use.
•Do not reach into the appliance if the tub is
moving.
• WARNING : This product contains chemicals known to
the State of California to cause cancer and birth defects
or other reproductive harm.
Wash hands after handling.

5
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of re or
explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETYINSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of re, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following.
•Refer to INSTALLATION INSTRUCTIONS for
detailed grounding procedures. Installation
instructions are packed with the washer for
installer’s reference. If the washer is moved to a
new location, have it checked and reinstalled by a
qualied service technician. Failure to follow this
warning can cause serious injury, re, electric shock,
or death.
•Do not, under any circumstances, cut or remove
the third (ground)prong from the power cord.
Failure to follow this warning can cause serious
injury, re, electric shock, or death.
•For personal safety, this appliance must be properly
grounded. Failure to follow this warning can cause
serious injury, re, electric shock, or death.
•The power cord of this applianceis equipped with
a 3-prong (grounding) plug which mates with a
standard 3-prong (grounding)wall outlet to minimize
the possibility of electric shock from this appliance.
•This washer must be plugged into a 120 VAC, 60 Hz
grounded outlet. Failure to follow this warning can
cause serious injury, re, electric shock, or death.
•Have the wall outlet andcircuit checked by a
qualied electrician to make sure the outlet is
properly grounded. Failure to follow this warning
can cause serious injury, re, electric shock, or
death.
•Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a properly
grounded 3-prong wall outlet. Failure to follow this
warning can cause serious injury, re, electric shock,
or death.
•Do not install on carpet. Install washer on a solid
oor. Failure to follow this warning can cause
serious leak damage.
•Do not remove ground prong. Do not use an
adapter or extension cord. Plug into a grounded
3-prong outlet. Failure to follow these warnings can
cause serious injury, re, electric shock, or death.
•The washer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. This provides the best
performance and also prevents overloading house
wiring circuits which could cause a re hazardfrom
overheated wires.
•Never unplugyour washer by pulling on the power
cord. Always grip plug rmly and pull straight out
from the outlet. Failure to follow this warning can
cause serious injury, re, electric shock, or death.
•Repair or immediately replace all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end. Failure to follow
this warning can cause serious injury, re, electric
shock, or death.
•When installing or moving the washer, be careful
not to pinch, crush, or damage the power cord.
Failure to follow this warning can cause serious
injury, re, electric shock, or death.
•The washer must be installed and electrically
grounded by a qualied service person in
accordance with local codes to prevent shock
hazardand assure stability during operation.
•The washer is heavy. Two or more people may be
needed to install and move the appliance. Failure to
do so can result in back or other injury.
•Store andinstall the washer where it will not
be exposed to temperatures below freezing or
exposed to outdoor weather conditions. Failure to
follow this warning can cause serious leak damage.
•Do not install the washer in humid spaces to reduce
the risk of electric shock. Failure to follow this
warning can cause serious injury, re, electric shock,
or death.
•To reduce the risk of injury to persons, adhere to all
industry recommended safety procedures including
the use of gloves and safety glasses.
Failure to follow all of the safety warnings in this
manual could result in property damage, injury to
persons or death.

6IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of re or
explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
WARNING
To reduce the risk of re, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following.
SAVE THESE INSTRUCTIONS
•Unplug the washer before cleaning to avoid
the risk of electric shock.
•Never use harsh chemicals, abrasive
cleaners, or solvents to clean the washer.
They will damage the nish.
•Do not put oily or greasy rags or clothing on
top of the washer. These substances give off
vapors that could ignite the materials.
•Do not wash items that are soiled with
vegetable or cooking oil. These items may
contain some oil after laundering. Due to the
remaining oil, the fabric may smoke or catch
re by itself.
•Disconnect this appliance from the
power supply before attempting any user
maintenance. Turning the controls to the OFF
position does not disconnect this appliance
from the power supply. Failure to follow this
warning can cause serious injury, re, electric
shock, or death.
•Do not combine laundry products for use in
one load unless specied on the label.
•Do not mix chlorine bleach with ammonia
or acids such as vinegar. Follow package
directions when using laundry products.
Incorrect usage can produce poisonous gas,
resulting in serious injury or death.
•Do not reach into the washer while parts are
moving. Before loading, unloading, or adding
items, press the START/PAUSEbutton and
allow the drum to coast to a complete stop
before reaching inside. Failure to follow this
warning can cause serious injury, re, electric
shock, or death.
•Do not allow children to play on or in the
washer. Close supervision of children is
necessary when the washer is used near
children. As children grow, teach them the
proper, safe use of all appliances. Failure to
comply with these warnings could result in
serious injury to persons or death.
•Destroy the carton, plastic bag, and other
packing materials after the washer is
unpacked. Children might use them for play.
Cartons covered with rugs, bedspreads, or
plastic sheets can become airtight chambers.
Failure to comply with these warnings could
result in serious injury to persons or death.
•Keep laundry products out of children’s
reach. To prevent injury to persons, observe
all warnings on product labels. Failure to
comply with these warnings could result in
serious injury to persons or death.
•Remove the door to the washing
compartment to avoid the danger of children
or small animals getting trapped inside
before your washer is removed from service
or discarded. Failure to do so can result in
serious injury to persons or death.

7PARTS AND ACCESSORIES
PARTS AND ACCESSORIES
Parts
Accessories
Detergent
dispenser
drawer
Door
Magnet Door
Plunger
(see page 2)
Control
panel
Door seal
Tub
Water inlets
Shipping
bolts Power
cord
Drain pump lter cover
Drain pump lter
Drain hose
Drain
hose
Hot and Cold
Water Hoses
Non-skid pads Caps (4)
(for covering shipping
bolt holes)
Wrench
(for removing
shipping bolts and
adjusting leveling feet)
Hole cap (5)
(for securing auto
dosing hole)
Tie Strap
(for securing drain hose)
Elbow Bracket
(for securing drain
hose)

8CONTROL PANEL FEATURES
Display LED
The display shows t he remaining time and
programming options.
Error codes are also displayed here.
Optional cycle
Super Wash: Wash cycle with longest run time.
Start/Pause button
The Start/PauseLED ashes when the cycle has
been chosen.
Status LED
Cycle button
Press the CYCLE button to select the desired
cycle based on laundry types and conditions.
Blood Bourne
Increased temperature for cleaning of heavily
soiled clothing.
Outer Shells
Use for warm washing for heavy external fabrics.
Cold
Use for cold washing for sturdy fabrics, such as
in station clothing.
Liners
Use for warm washing for internal fabrics.
LED Description
LED ashes whenever the
washing cycle is in operation.
LED ashes whenever the
rinsing cycle is in operation.
LED ashes whenever the
spinning cycle is in operation.
LED ashes whenever the
door lock is activated.
CONTROL PANEL FEATURES

9
INSTALLATION INSTRUCTIONS
Space requirements
You must allow sufcient space for water lines,
the drain line, and airow.
Installing on a oor
Install the washing machine on a solid oor
that is strong and rigid enough to support the
weight of the washing machine, even when
fully loaded, without exing or bouncing. If
the oor has too much ex, you may need to
reinforce it to make it more rigid. If the oor
is not solid, it may cause severe vibration and
noise.
1Clean the oor before installation.
- Make sure to select solid and smooth
ground.
2Two or more people are needed for moving
and unpacking the washing machine.
3Allow for sufcient space between the walls
and the washing machine for installation.
Checking and choosing the
proper location
32.0”
(81.4 cm)
53.9”
(137.0 cm)
4.0”
(10.0 cm)
23.3”
(59.1 cm)
29.0”
(73.7 cm)
1.0”
(2.5 cm)
1.0”
(2.5 cm)
INSTALLATION INSTRUCTIONS
NOTE
• Be sure to allow for wall, door, or oor
moldings that may increase the required
clearances. NOTE
• The oor must be strong and rigid enough
to support the weight of the washer,
when fully loaded, without flexing or
bouncing. If your oor has too much ex,
you may need to reinforce it to make it
more rigid. A oor that is adequate for
a top-loading washer may not be rigid
enough for a front loading washer, due to
the difference in the spin speed and
direction. If the oor is not solid, your
washer may vibrate and you may hear and
feel the vibration throughout your house.
• Before installing the washer, make sure
the oor is clean, dry and free of dust,
dirt, water and oils so the washer feet
can not slide easily. Leveling feet that can
move or slide on the oor can contribute
to excess vibration and noise due to poor
contact with the floor.

10 INSTALLATION INSTRUCTIONS
Installing Hole cap
1Use provided hole caps.
2Insert the hole cap (5 pieces) into hose
connect in back of the machine.
FoamTub Support Carton Base
NOTE
• Save the bolt assemblies for future use.
To prevent damage to internal
components, DO NOT transport the
washer without reinstalling the shipping
bolts.
• Failure to remove shipping bolts and
retainers may cause severe vibration
and noise, which can lead to permanent
damage to the washer. The cord is
secured to the back of the washer with
a shipping bolt to help prevent operation
with shipping bolts in place.
NOTE
• In case of using auto dosing feature,
inserting hole cap is unnecessary.
1Remove the bottom two shipping bolts
with the wrench (included) to fully loosen
all shipping bolts by turning them
counterclockwise and then pulling them out.
2Locate the four hole caps included in the
accessory pack and install them in the
shipping bolt holes.
Unpacking and removing
shipping bolts
When removing the washer from the carton
base, be sure to remove the foam drum
support in the middle of the carton base.
If you must lay the washer down to remove the
base packaging materials, always lay it carefully
on its side.
DO NOT lay the washer on its front or back.
Shipping
bolt
Retainer
Cap
Hole cap

11
INSTALLATION INSTRUCTIONS
NOTE
• For your safety, and for extended product
life, use only authorized components.
The manufacturer is not responsible for
product malfunction or accidents caused
by the use of separately purchased
unauthorized parts.
• Use new hoses when you install the
washing machine. Do not reuse old hoses.
Use only the inlet hoses provided with the
washer.
• Periodically check the hoses for cracks,
leaks and wear, and replace the hoses
every 5 years.
• Do not stretch the water hoses
intentionally, and make sure that they are
not crushed by other objects.
• Water supply pressure must be between
20 PSI and 120 PSI (138~827 kPa). If the
water supply pressure is more than 120
PSI, a pressure reducing valve must be
installed.
• To provide optimum washing performance
the hot water temperature should be set
at 100°F (38°C) and the cold at
60°F (15°C).
Connecting the water lines
1Check the rubber seals on both sides of the
hose.
- Insert a rubber seal into the threaded
ttings on each hose to prevent leaking.
2Connect the water supply hoses to the HOT
and COLD water faucets tightly by hand and
then tighten another 2/3 turn with pliers.
- Connect the blue hose to a cold water
faucet and the red hose to a hot water
faucet.
4Connect the hoses to the water inlets tightly
by hand and then tighten another 2/3 turn
with pliers.
- Connect the blue hose to the cold water
inlet and the red hose to the hot water
inlet.
5Check for leaks by turning on the faucets.
- If water leaks, check steps 1 to 4 again.
3After connecting inlet hose to water
faucets, turn on the water faucets to ush
out foreign substances (dirt, sand, sawdust)
in the water lines. Let water drain into a
bucket, and check the water temperature.
Cold
water inlet
Hot water
inlet
Rubber seal
Water hose
(To water inlet on the
washing machine)
Rubber seal
Water hose
(To faucet)
WARNING
• Do not overtighten. Damage to the
coupling can result.
WARNING
• Do not overtighten the hoses.
Overtightening can damage the valves
resulting in leaking and property damage.

12 INSTALLATION INSTRUCTIONS
Connecting the drain line
Secure the drain hose in place to prevent
moving and leaking.
Connecting the auto dosing
1Unscrew the 2 screws on the protective
cover.
2 Remove the protective cover.
3 Connect the auto dosing harness.*
*Electrical harness for auto dosing not included.
Using a standpipe
1Clip the end of the hose into the elbow
bracket.
- Connect the elbow bracket within 4 inches
(10 cm) from the end of the drain hose.
If the drain hose is extended more than
4 inches (10 cm) beyond the end of the
elbow bracket, mold or microorganisms
could spread to the inside of the washer.
Using a laundry tub
1Clip the end of the hose into the elbow
bracket.
- Connect the elbow bracket within 4 inches
(10 cm) from the end of the drain hose.
If the drain hose is extended more than
4 inches (10 cm) beyond the end of the
elbow bracket, mold, or microorganisms
could spread to the inside of the washer.
2Hang the end of the drain hose over the side
of the laundry tub.
3Use a tie strap to secure the drain hose in
place.
Drain Hose
Elbow Bracket
Drain Hose
No more than
4 inches (10 cm)
Elbow Bracket
No more than
4 inches (10 cm)
Elbow Bracket
Elbow
Bracket
Tie Strap
Laundry Tub
max. 96”
(2.4 m) max. 96”
(2.4 m)
2Insert the end of the drain hose into the
standpipe.
3Use a tie strap to secure the drain hose in
place.
NOTE
• The drain hose should be properly secured.
Failure to properly secure the drain hose
can result in ooding and malfunction.
• Total height of the hose end should not
exceed 96 inches (244.8 cm) from the bot-
tom of the washer.
• The drain must be installed in accordance
with any applicable local codes and regula-
tions.
• Make sure that the water lines are not
stretched, pinched, crushed, or kinked.
*

13
INSTALLATION INSTRUCTIONS
Leveling the washing machine
The washer tub of your new washing machine
spins at very high speeds. To minimize
vibration, noise, and unwanted movement, the
oor must be perfectly level and solid.
1Check the washing machine’s level.
- Check the precise level by rocking the top
edges of the washing machine or placing
a level on the washing machine. The slope
beneath the washing machine must not
exceed 1°, and all four leveling feet must
rest rmly on the oor.
2Turn the lower leveling feet clockwise to
level the washing machine.
- Turning the lower leveling feet clockwise
raises the washing machine.
3Turn the locknuts counterclockwise and
tighten them when the washing machine is
level.
4Check the washing machine’s level again.
- Push or rock the top edges of the washing
machine gently to make sure that the
washing machine does not rock.
- If the washing machine rocks, repeat steps
1 to 3.
Using non-skid pads (optional)
If you install the washing machine on a slippery
surface, it may move because of excessive
vibration. Incorrect leveling may cause
malfunction through noise and vibration. In the
event of this, lay the non-skid pads under the
leveling feet and adjust the level.
1Clean the oor to attach the non-skid pads.
- Use a dry rag to remove and clean foreign
objects or moisture. If moisture remains,
the non-skid pads may slip.
2Adjust the level after placing the washing
machine in the installation area.
3Place the adhesive side of the non-skid pad
on the oor.
- It is most effective to install the non-skid
pads under the front legs. If it is hard to
place the pads under the front legs, place
them under the back legs.
4Check the washing machine’s level again.
- Push or rock the top edges of the washing
machine gently to make sure that the
washing machine does not rock. If the
washing machine rocks, level the washing
machine again.
Level
1°
Raise
Tighten all 4 lock
nuts securely
using
the wrench.
Remove
backing
This side up
Adhesive
side
WARNING
• Using the washing machine without
leveling, it may result in malfunction caused
by the production of excess vibration and
noise.
• Use the leveling feet only when you level
the washing machine. If you raise the
leveling feet unnecessarily, it may cause
abnormal vibration of the washing machine.

14 OPERATING YOUR WASHER
OPERATING YOUR WASHER
Do not work any button and stop the washer
(when the washer is operating) or (when a
cycle is in progress).
1. Ready mode
The cycle LEDs ash at the same time,
and displays PUSH.
3. Change course
You cannot change the cycle while the
machine is running.
4. Cycle nish
The machine stops and LED display shows
“End” with beeper sound.
2. Select the cycle
Press the desired button and press the
Start button. The display LED will show the
remaining time and the selected cycle starts.
WARNING
• To reduce the risk of re, electric shock, or
injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating
this appliance.

15 OPERATING YOUR WASHER
INSTALLING A PUMP
Channel #
1 N/A N/ABlack -
Brown +
Orange +
Yellow +
Blue +
Red +
N/A N/A
N/A N/A
N/A N/A
Main Wash Main Wash Phase
N/A N/A
4
6
7
8
Type Wire Color Signal Type Input Period
- The Blue and Black wire will be used for connecting the extractor to a single pump.
- The Blue wire triggers the pump to run detergent into nozzle 1 of the extractor.
- All other colored wires can be taped or capped off.
14678 Skip
1
2
3
4
*Wiring harness not included. Must be purchased separately.
*

16 MAINTENANCE
CAUTION
• Cleaning the door seal with an undiluted
solution may cause malfunction of the
door seal and washing machine parts.
Cleaning the door seal
Clean the door seal once a month to prevent
build-up of dirt in the door seal.
1Wear rubber gloves and protective goggles.
2Dilute 3/4 cup (177 ml) of liquid chlorine
bleach in 1 gallon (3.8 L) of water.
3Soak a sponge or a soft cloth in this diluted
solution and wipe down all around the door
seal.
4Wipe any moisture with a dry towel or cloth
after cleaning.
5Leave the door open to allow the door seal
to dry completely.
NOTE
• Do not use anything other than water to
clean the drawer, inserts, and drawer
opening.
Cleaning the dispenser
1The dispenser should be cleaned periodically
to remove buildup from detergent and other
laundry products.
2Remove inserts from the drawer, and clean
them with warm water and a soft cloth or
brush to remove any residue or buildup.
Wipe out the inside of the drawer opening with
a damp cloth. Reassemble the drawer and
reinstall the drawer opening.
MAINTENANCE Cleaning the drum
Using the washing machine in a humid space
for a long period of time may lead to a buildup
of black mold and germs in the air inside the
washer tub and affect your health. If you clean
the washer tub regularly on a monthly basis
Using the “Blood Bourne” (hot) cycle it will keep
the washer tub clean for hygienic use.
1Add tub cleaner or lime scale remover into
the detergent dispenser drawer.
- Do not exceed the maximum detergent
limit line when you add it. Detergent may
remain in the washer tub after cleaning.
2Run cycle.
NOTE
• Never load laundry while cleaning the tub.
The laundry may damage or become
contaminated. Make sure to clean the
washer tub when it is empty.
• Leave the door open after nishing the
laundry to keep the tub clean.
• Cleaning the tub can be repeated
monthly.
• Safely and conveniently secure the
door slightly ajar with a magnetic door
plunger. This will promote air circulation
and allow the interior of the
machine to dry.

WARNING
•Unplug the power cord and turn off the
faucets before cleaning. Failure to do so
may cause electric shock.
•Do not use the washing machine without
inlet lters. If you use the washing machine
without the inlet lters, it will cause leaks and
malfunction.
• If you use the washing machine in an area
with hard water, the inlet lter may clog due
to buildup.
NOTE
• message will blink on the display when
the water pressure in the detergent drawer
is weak or an inlet lter is clogged with dirt.
Clean the inlet lter.
Cleaning the water inlet lters
Clean the water inlet lters periodically to prevent
clogging. Take extra care to clean the water inlet
lters for areas using hard water. Water may not
be supplied if there are foreign objects, such as
rust, sand, or stones in the water inlet lters.
1Pull out the plug to turn off the
washing machine.
2Turn off the faucets connected with the
water inlets.
3Remove the water inlet hoses.
Cleaning the drain pump lters
The washing machine fails if the drain pump lter
is clogged. Periodically clean the drain lter to
prevent clogging with foreign objects.
1Pull out the plug to turn off the
washing machine.
2Open the drain pump lter cover.
3Unclip the drain hose and remove the plug
from the drain hose to drain the remaining
water.
4Twist the pump lter counterclockwise to
remove.
5Clean the pump lter and opening.
6Recap the plug onto the drain hose and
reattach the drain hose.
7Insert the drain pump lter.
8Close the drain pump lter cover.
17 MAINTENANCE
WARNING
•Make sure to pull out the plug before
Cleaning. Failure to do so may cause
electric shock.
• Opening the drain lter will result in water
overowing if there is water in the washer
tub. Make sure to check if the water is
completely drained before opening the
drain lter.
• If you use the washing machine with the
drain lter reassembled incorrectly after
cleaning it or with no lter, it may cause
leaks or malfunction of the machine.
NOTE
• message will blink when the drain
Pump lter is clogged with dirt. Clean the
Drain pump lter.

18
ERROR MODE
ERROR MODE
Meaning of Error Codes that LED displays during occurrence of
problem.
Problem Possible Cause Solution
• Water supply is not adequate in area.
• Water supply taps are not completely open.
• Water inlet hose is bent.
• The lter of the inlet hose clogged.
Check another tap in the house.
Fully open tap.
Straighten hose.
Check the lter of the inlet hose.
• Drain hose is bent or clogged.
• The drain lter is clogged.
Clean and straighten the drain
hose.
Clean the drain lter.
• Load is too small.
• Load is out of balance.
• The appliancehas an imbalance detection
and correction system. If individual heavy
articles are loaded (bath mat, bath robe,
etc.) and the imbalance is too great, after
several attempts to restart the spin cycle the
machine will stop and the error code will be
displayed.
Add 1~2 similar items to help
balance the load.
Rearrange load to allow proper
spinning.
• Is the door opened or not completely closed? Close the door completely.
✽If it will not open, call for
service.
• Door lock is broken. Check the door switch.
• The water overlls due to a faulty water
valve.
Close the water tap.
Unplug the power plug.
Call for service.
• The water level sensor malfunction.
• Overload in motor. Restart the cycle after 30 minutes.
If is not released, call for
service.
• Too much detergent is used. This is not an error. It indicates a
suds removal routine.
It will clear and restart the cycle
when the suds are gone.
• Thermistor is opened or shorted. Thermistor should be replaced.
*For further troubleshooting, please contact Ready Rack by Groves Incorporated at 800-991-2120.
**Please have your product serial number ready before calling.

19 POWER FAIL RECOVERY& DEFAULT WASHER SETTINGS & SPECIFICATIONS
POWER FAIL RECOVERY
In case of power failure, the machine stops running but the time display remains on, showing the
time just before power failure.
SPECIFICATIONS
Model
Name Front-loading Washing Machine: EW30
Power supply 120 V~ 60 Hz
Size 29.0”(L) X 32.0”(D) X 40.8”(H), 53.9”(D with door open)
73.7 cm (L) X 81.4 cm (D) X 103.6 cm (H), 137.0 cm (D with door open)
Weight 221 lbs (100.25 kg)
Wash capacity 5.2 cu.ft (IEC: 6.0 cu.ft)
Spin speed 100 G Force
Permissible water pressure 20 - 120 psi (138 ~ 827 kPa)