Features
• Plug-and-Playinstallation
• Upto200Mbps*bandwidthoverstandardhomepowerlines
• HomePlugsignaleasilypassesthroughcircuitbreaker
• 128-bitAESencryptionensuresdatasecurity
• Encryptioncompletedbyhardware,withoutsacricetobandwidth
• Eachadapterincludes1IEEE802.3computerEthernetport
• HomePlugPowerlineSpecication2.0-compliant
• Contains2Adapters,2Ethernetcables,andinstallationCD
Product Specifications
• ComputerInterface:IEEE802.3/802.3u
• OperatingTemperature:0~45degreesC
• StorageTemperature:-20~-80degreesC
• Humidity:Max.5%-90%(non-condensing)
LED Behavior
Security LED (Top LED labeled PWR)
SolidGreen–Connectedtopowerline
Off – Power off
Blinking Green – Encryption setting up
Solid Green – Encryption setup successful
Double Green – Fail in encryption
HomePlug Powerline Link LED (Middle LED labeled HP)
Blinking – Powerline data transmitting or receiving
ColorGreen–Physicallinkrategreaterthan100Mbps
ColorRed–Physicallinkratelessthan50Mbps
ColorYellow–Physicallinkrateinbetween50Mbpsto99Mbps
Off – No Activity
Ethernet Link LED (Bottom LED labeled ETH)
SolidGreen–10/100Mbpsportlinked
Blinking – Ethernet data transmitting or receiving
Off – No Ethernet link
USER MANUAL
HD network Adapter
High Speed Data/Video Streaming
*Thestandardtransmissionrate–200Mbps–isthephysicaldatarate.Actualdatathroughputwillbelower.
System Requirements
• At least 2 HomePlug devices
• Available Ethernet port on each computer or network device
• Available power outlet
Hardware Setup
1. Locate modem or router at the broadband access point.
2. Plug your network cable (provided) into the modem or router’s
RJ45networkadapterport.
3.PlugtheotherendofyournetworkcableintotheRJ45portlocated
at the bottom of the Adapter.
4. Plug the Adapter into any wall socket or Powerline supported
PowerCenter.
Note: Do not plug the device into a UPS or power strip with surge
protection as they may filter the powerline signal.
5. Usethesteps3and4forthesecondAdaptertoconnectyour
computer, IPTV, or other network device to the network.
1
3
2
4
5