
3
ENG
Technical support: www.real-el.com
User’s manual S-111
6. TROUBLESHOOTING
Attention! If none of the above methods can solve the problem, please seek professional advice at
your nearest service center. Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound or sound
of speakers is too
quiet.
Distortion of
sound.
Cause
The MSS isn’t connected to a USB port.
Volume level is set at its minimum value.
Improperly connected audio source.
Large amplitude of the input signal.
Solution
Check the connection.
Adjust the volume control knob.
Connect audio sources correctly.
Turn down the source volume
and the MSS volume.
Parameter, measurement unit
Output power (RMS), W
Frequency range, Hz
Speaker dimensions, mm
Connection, mm
Power supply
Case material
Dimensions (one speaker), mm
Weight, kg
Value
6 (2 × 3)
90 – 20.000
Ø 65
Ø 3.5
USB / 5V DC
ABS plastic
78 × 175 × 95
0,76
7. TECHNICAL SPECIFICATIONS
Notes:
• Technical specifications given in this table are supplemental information and cannot give occasion
to claims.
• Technical specifications and package contents are subject to change without notice due to the
improvement of REAL-EL production.
5. PREPARATION AND OPERATION
Speaker placement
•Place the speakers symmetrically to the listener at least one meter away.
•Place MSS far away from monitors and TV sets, as insignificant image distortion in these
supersensitive devices is possible.
MSS Connecting
Multimedia Speaker System (MSS) can be connected to USB port on your computer or laptop
(see connection diagram, Fig. 1).
• Plug USB cable bto the USB port on your computer or laptop.
• Plug signal cable mini jack ato PC sound card or to audio output of the audio source.
• Adjust speaker volume level by Windows tools or using volume control at your own discretion.
Note: Connect the speakers to USB port of your laptop or PC otherwise please use active USB-hub.