
Pairing
•To transmit a signal via Bluetooth it is necessary to connect the device
with a signal source (see connection diagram in Fig. 2). For this purpose
turn on the headphone and not releasing button bwait for the search
mode to be activated – LED indicator dindicates blue and red alternate.
•Select the search mode on a signal source (cell phone, tablet, laptop
etc.). «GD-880» will be displayed on the devicelist, need to choose it and
make connection*.
•When connection is successful, there will be vocal signal. If no device
connected, the earphones will be turned offautomatically in 10 minutes. To
interface devices, the earphones should be turned on again to the search
mode**.
•LED indicator on the earphones blinks blue and red during the data
exchange with a device connected via Bluetooth.
* You might have to enter “0000” code to connect some models of devices via
Bluetooth.
** If the item has been already registered in the device list of a source, then the
second search mode activation is not needed. Choose only the item name and the
“connect” command on the source.
ENG
User’s manual
Technical support: www.real-el.com
3
GD-880