Really Good Stuff Reading Area Two-Sided Bookcase User manual

Reading Area Two-Sided Bookcase Assembly Instructions
Helping Teachers Make A Difference®© 2017 Really Good Stuff®1-800-366-1920 www.reallygoodstuff.com Made in China #164400 Helping Teachers Make A Difference®© 2017 Really Good Stuff®1-800-366-1920 www.reallygoodstuff.com Made in China #164400
All instructional guides can be found online.
J
O
NM
Attach the latch Qhorizontally to the right
side panel Awith 2 short screws M.
Repeat steps 1-13 for Bookcase 2, using side
panels Cand Din place of panels Aand B.
Attach the latch strike plate Qto the left
side panel Dof Bookcase 2 using 2 short
screws M, making sure the hook side of the
strike plate faces the front.
Attach the 2 hinges Konto the right side
panel Cof Bookcase 2 with 3 short flathead
screws N each, making sure the covered ends
of the hinges are at the top.
Place the bookcases back to back. Lift up
Bookcase 2 (the unit with the hinges with no
pintles) up and onto the pintles on the hinges
of Bookcase 1.
Secure the bookcases together by hooking the
loop edge of the latch over the hook side of
the latch strike plate.
D
15
larger distance
between holes
Reading Area Two-Sided Bookcase Assembly Instructions
Locate a shelf bottom Hwith large side holes
and a shelf divider I. Attach the 2 pieces
together with 3 medium screws Othrough the
divider panel into the shelf bottom.
Turn the assembled piece to the left so that
the shelf bottom Hwith the large hole is facing
up and to the right. Locate another shelf
bottom Hwith small side holes and attach it
to the assembled unit with 3 medium screws O
through the shelf divider I.
Turn the assembled piece to the left again so
that the shelf bottom Hwith the large hole is
facing down and to the left. Locate another
shelf divider Iand attach it to the right side of
the assembled unit (which is a shelf bottom H
with the small hole) with 3 medium screws O
through the shelf divider I.
2
A– Right side panel of Bookcase 1
B– Left side panel of Bookcase 1
C– Right side panel of Bookcase 2
D– Left side panel of Bookcase 2
E– 6 Wood rods
F– 2 Back panels
G– 2 Front panels
H– 8 Shelf bottoms (4 with large side
holes, 4 with small side holes)
I – 6 Shelf dividers
J– 2 Hinges with pintles
K – 2 Hinges
L – 8 Wood pegs
M– 4 Short round screws (for latch)
N– 12 Short flathead screws (for hinges)
O– 72 Medium screws
P– 8 Long screws (for rods)
Q– 1 Latch and strike plate
This Really Good Stuff®product includes: B
A
E
1
1
2
Congratulations on your purchase of this Reading Area Two-Sided Bookcase. (Adult assembly required)
C
latch holes
horizontal latch holes vertical
D
shorter distance
between holes
F
G
H
IK
LPQ
check hole size on sides
H
large hole
I
3 screws
H
H
small hole
3 screws
3
3
H
H
I
I
small hole
large hole
3 screws
To assemble Bookcase 1:
15
2 screws
16
16
2 screws
Q
hook side
17
D
17
3 screws each
covered end
K
K
C
Q
18
18
19
19
Bookcase 2
Bookcase 1
pintle
To assemble Bookcase 2:
A
no pintle
ChokeWarning_D.pdf 1 6/2/16 11:00 AM
164400 Assembly.indd 1-2 9/29/17 3:44 PM

8
Reading Area Two-Sided Bookcase Assembly Instructions
Helping Teachers Make A Difference®© 2017 Really Good Stuff®1-800-366-1920 www.reallygoodstuff.com Made in China #164400
Reading Area Two-Sided Bookcase Assembly Instructions
Helping Teachers Make A Difference®© 2017 Really Good Stuff®1-800-366-1920 www.reallygoodstuff.com Made in China #164400
Flip the assembled piece over to the right so
that that the shelf bottom Hwith the large
hole is on the right. Attach another shelf
bottom H with large side holes to the shelf
divider Ion the left side with 3 medium screws
O through the shelf divider I.
Flip the unit over to the left. Attach a shelf
divider Ito the shelf bottom Hwith the large
hole on the right with 3 medium screws O
through the shelf divider I.
Flip the unit over to the left. Attach a shelf
bottom Hwith the small holes to the shelf
divider I on the left with 3 medium screws O
through the shelf divider I.
Leaving the unit in the same position, locate
a back panel F and attach it to the shelf
bottom H with the large hole on the right side
with 3 medium screws O.
Flip the unit over so that the unit is upright
with the back panel Fat the back and facing
forward. Locate the right side panel of
Bookcase 1 A and insert 2 wood pegs Linto
the 2nd and 4th holes on the inside of A. Line
up the wood pegs with the larger holes on the
right side of the assembled unit.
Screw in 4 medium screws Ofrom the outside
of panel A: 2 screws along the right back edge
and 2 screws in the holes toward the bottom.
Locate 2 wood rods Eand place them in the
top and bottom holes on the inside of panel A.
Secure the rods with 2 long screws Pthrough
the larger holes on the outside of panel A.
Locate the left side panel of Bookcase 1 B and
insert 2 wood pegs Linto the 2nd and 4th
holes on the inside of B. Locate a wood rod E
and place into middle hole of the inside panel A
on the right. While holding the rod in place, line
up the hole for the rod on the inside of panel B
and the wood pegs on Bwith the larger holes
on the left side of the assembled unit and
squeeze together.
Locate 2 long screws P and screw into the
largest holes on the the outside of panel Bto
secure the wood rods. Then screw in 4 medium
screws Ofrom the outside of panel B: 2
screws along the left back edge and 2 screws
in the holes toward the bottom.
Locate a front panel Gand attach it to the
front of the bookcase with 5 medium screws
O.
Attach the 2 hinges with pintles Jonto the
left side panel Bwith 3 short flathead screws
N each, making sure the pintles point up.
44
H
large hole
H
large hole
3 screws
I
5
5
H
large hole
I
3 screws
6
6
H
small hole
I
3 screws
7
H
F
3
screws
7
8
FA
2 wood
pegs
9
10
10
E
2 long
screws
11
11
E
2 wood
pegs
12
9
A2 screws
2 screws
12
2 long
screws
2 screws
2 screws
13
13
5 screws
14
14
3 screws
each
pintle up
B
large hole
B
G
B
164400 Assembly.indd 3-4 9/29/17 3:44 PM