Reasnow Cross Hair User manual

Step 2: Run Cross Hair Manager (Windows OS only)
Run Cross Hair Manager which can be downloaded from
Please choose the latest version)http://www.reasnow.com (
Step 3: Choose console and game
● If there is already a configuration of the game you want to play,
choose the configuration and click on the “Edit” button, this is the
fastest way.
● If there is no existing suitable configuration, just click on the
“New” button to add a new configuration. Make any changes as
you see fit.
● If the game you want to play do not exist, just choose the
“custom game”. This setting has the highest possibility of
working, as most games are not varied very much from each
other.
● Remember to mark the configuration most frequently used as
“Start Up”. Click the configuration first then click on the “Start Up”
button.
Step 4: Edit Configuration
For convenience, you can use the default settings, but should
remember the keys’ mapping, while advanced users can choose
their favorite settings.
Step 5: Save and Exit
You should save the configuration first, before exiting
Manager, and after that, unplug the Cross Hair from PC.
Changes you made will not be saved in you Cross Hair
until you have clicked on the “Save” button.
3. Save to On-Board Memory
Some mice have on-board memory to store DPI and other
settings, please remember to save all these in On-Board
Memory.
Some mice have no on-board memory, but their DPI can
be adjusted, so you need to set their DPI to maximum
every time powered on.
If you have a mouse which can not be configured,just skip
1-3.
● Choose the game console you are going to use by clicking on
the right arrow button
Quick-Start-Guide
A. Check the conditions
● Game console is needed (such as PS4/PS3/XBOX ONE/
XBOX 360).
● Genuine controller for the game console.
● Keyboard,mouse (2000 DPI and above is recommended,
should be configured on PC first) , joystick or other controller
you wish to use.
B. Simple set up steps
Step 1: Connect to PC (PC MODE)
C Things to do before playing
1. Mouse DPI (CPI)
2. Mouse Report Rate
Make sure the mouse you are using is configured at its
highest DPI, or you should connect it to a PC, and use
some software from the producer to change the DPI to
maximum.
Set your mouse USB polling rate to either 500 or 1000.
●
Make
sure that there is no controller, keyboard, mouse, joystick
or anything else plugged into it.
PC MODE
Please connect your Cross Hair according to the figure
above, using the USB cable included in the package.
And when Cross Hair
LOGO is white, it enters into , and can then be
configured on PC.

2. Use a joystick and mouse, instead of a controller
E. Play your game
Different platform has different keys to use.
In , you can use the controller to change HIP
and ADS sensitivity as well as key mapping.
CONFIG MODE
Color and Sound in CONFIG MODE:
After changing settings to you liking, just press the combination
keys again, and you will exit the , and return to
.
CONFIG MODE
PLAY MODE
G. Technical Specifications
H. Package Contents
5. Battery of controller or mouse
Make sure your controller is fully charged and off, and the
mouse is also fully charged, if there is battery in it.
1. Use a keyboard and mouse, instead of a controller
D. Ways to Use Cross Hair
1. ReaSnow Forum : (Recommended)
2. Contact our retailers.
4. LOOK SENSITIVITY
Set the game's “LOOK SENSITIVITY” to maximum. It may
be called Insane, Maximum, 10, or 100.
The controller connected to USB 1 should always be
the original one shipped with the console.
Connect all devices to Cross Hair first, and then connect
Cross Hair to game console.
3. Use another controller instead of the original one
(Cross platform controller usage)
Take your time and enjoy your game! But if you want to
know Cross Hair better, the following chapters and the user
manual are both very important.
●Adjusting HIP sensitivity (CONFIG MODE)
D-Pad Up key is for increasing HIP sensitivity. You will see a
flashing red light and hear a higher pitch sound once the key
is pressed.
D-Pad Down key is for decreasing HIP sensitivity. You will
see a flashing red light and hear a lower pitch sound once the
F. Setting up in-game (CONFIG MODE)
We provide our users with this function for the most flexible
and comfortable setting experience. Although everything of
Cross Hair can be configured on PC using its Manager, you
will like setting it up in-game, for this procedure will give you
instant feed back when changing the settings.
At any time in Game Mode, just press
(PS4 platform)keys on your controller to enter CONFIG
MODE and the LOGO’s light will be turned off in this mode.
SHARE+OPTIONS
●
●
Adjusting ADS sensitivity (CONFIG MODE)
Mapping keys (CONFIG MODE)
PS
GUIDE
CONFIG
MODE
CONFIG MODE
PC MODE
It is especially recommended to use CONFIG MODE for
mapping keys of joystick or controller.
D-Pad Right key is for increasing ADS sensitivity. You will see a
flashing green light and hear a higher pitch sound once the key
is pressed.
D-Pad Left key is for decreasing ADS sensitivity. You will see a
flashing green light and hear a lower pitch sound once the key
is pressed.
To begin key mapping, you should press the key (PS4/PS3)
or key (XBOX ONE/360) on controller. Then the LOGO
will show flashing blue. This means you can choose one key
to be mapped.
Once the key on the controller is pressed, LOGO will show a
stable blue light, and then wait for the corresponding key on the
keyboard, mouse, joystick, etc. After selecting your key, Cross
Hair will keep flashing blue again. Then a new key mapping can
be continued.
After mapping all the keys, you can press SHARE+OPTIONS
PS4 platform keys on your controller to exit the
, and end the mapping procedure.
Mapping keys in is recommended, as you can
get instant response in-game, and all the keys can be mapped.
On the contrary, in , some special keys of your
mouse, keyboard or joystick may not be d
on
the controller
etected due to OS's
limitations.
（）
Cross Hair ×1 USB Cable ×1
Quick Guide ×1
I. Technical support
For controller, KB, MS
http://www.reasnow.com/forum/