Red Epic Mysterium-X User manual

!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Inputs........................................12
Line Level Analog Inputs...........13
Video Monitoring Outputs.........13
RED LCD / Bomb EVF® ...........14
REDmote®................................15
Digital Magazine (Media)...........16
Metadata ..............................16
Clip Naming
Conventions .........................17
SMPTE Timecode ................17
Power Consumption ............18
CAMERA OPERATIONAL
CONTROLS ..................................19
Brain .........................................19
Side SSD Module .....................20
Side Handle ..............................21
Top.......................................21
Front.....................................22
REDmote .............................39
Navigating Menus .................... 39
Using Touchscreen LCD ..........40
Shortcuts .............................40
Power Down ........................41
Lock / Unlock
Touchscreen Opreration...... 41
FIRST TIME USE – SETTING
UP YOUR RED EPIC.................... 43
1. Attach Power Source ...........43
2. Power UP ............................. 44
3. Preparing to Record............. 44
Connecting and
Formatting Media ................45
Performing a Black
Shading Calibration ............. 45
Adjusting Project
Settings................................46
4. Recording.............................47
Record Indicator ..................47
5. Playback............................... 48
MENU CONTROLS ...................... 49
Adjustments ............................. 49
Basic Setting
Adjustments......................... 49
Advanced Setting Menus.....49
MAIN MENU.................................51
FPS (VARISPEED) .................... 51
Basic Settings...................... 51
Advanced Settings...............52
ISO (Sensitivity) ........................ 52
Format Media ...................... 70
Eject Media ......................... 71
Settings Menu.......................... 71
Display................................. 72
Look .................................... 87
Sensor................................. 89
Project................................. 90
Modes ................................. 92
Audio/Video......................... 92
Setup................................... 95
Maintenance...................... 102
Power Menu........................... 109
APPENDIX A: UPGRADING
TABLE OF CONTENTS
TABLE OF CONTENTS ............... 1
DISCLAIMER ................................. 3
Copyright Notice........................ 3
Trademark Disclaimer................ 3
COMPLIANCE ............................... 4
Industrial Canada Emission
Compliance Statements ............ 4
Federal Communications
Commission (FCC)
Statement .................................. 4
Australia and New Zealand
Statement .................................. 5
Japan Statements...................... 5
European
Union Compliance
Statements ................................ 5
BEFORE YOU START ................... 7
Important Safety
Instructions ................................ 7
THEORY OF OPERATION............10
MYSTERIUM X® Sensor ..........10
Image Processing .....................10
HDRx™.....................................11
Magic Motion............................12
Audio Recording.......................12
Microphone Level Analog
Rear......................................23
Power Down ........................34
Graphical User Interface
and Navigation ......................... 35
RED LCD/Touchscreen
LCD, BOMB EVF,
External Monitors................. 35
Side Handle .........................38
F (F-Stop) .................................53
1/SEC (EXPOSURE) .................53
Basic Settings...................... 53
Advanced Settings...............53
White Balance ..........................56
Basic Settings...................... 56
Advanced Settings...............56
Resolution ................................58
REDcode® ............................... 58
SECONDARY MENUS ................. 60
HDR Menu................................60
HDR ON / OFF.....................60
Stops ...................................61
Focus Menu ............................. 61
Mode ...................................61
Zones................................... 62
Exposure Menu ........................63
Presets Menu........................... 64
Create Preset ...................... 64
Export / Import Preset......... 66
Delete Preset....................... 68
Media Menu ............................. 68
Select Media ....................... 69
Set media ............................ 69
CAMERA FIRMWARE ............... 110
Verify Current Camera
Firmware ................................ 110
Upgrade Procedure ............... 111
APPENDIX B: MANAGING
DIGITAL MEDIA......................... 114
Media ..................................... 114
Formatting Media................... 114
Media Capacity Remaining
Status..................................... 115
Eject Media from Camera
(Unmount) .............................. 116
Using REDmote /
Touchscreen LCD ............. 116
Using Side Handle............. 116
Using Side CF / SSD......... 117
Copying Media....................... 117
Erasing Media ........................ 118
Macintosh OS X ................ 118
Windows ........................... 118
APPENDIX C: CHARGING
BATTERIES................................ 119
Battery LED Array .................. 119
Charging ................................ 119
APPENDIX D: INPUT /
OUTPUT CONNECTORS .......... 120
Brain Front ............................. 120
MIC-1, MIC-2
(Microphone Audio) ........... 121
Brain Rear .............................. 122
HD-SDI.............................. 123
Headphone........................ 124
SYNC (Video Sync)............ 125
CTRL (RS232 Control)....... 127
GIG-E (Ethernet) ................ 128
Installation / Removal...........25
REDmote ..................................27
BOMB EVF................................29
RED LCD ..................................30
Touchscreen LCD.....................31
BASIC OPERATION .....................32
Power Sources .........................32
Side Handle..........................32
External DC Power...............32
Power UP .............................33
Version 1.4.0 SVN 29352 BETA
1
APRIL 19, 2011 ©2011 RED.COM INC.

!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
DC IN (Power Input) ...........129
HDMI Out ...........................130
Side SSD Module ...................131
REDmote ................................132
APPENDIX E: REDMOTE
OPERATION ...............................133
Controls ..................................133
Still / Motion Toggle
Switch ................................133
LEDs...................................134
Zoom Rocker Switch..........134
User Function Keys............134
Menu Button ......................134
Soft Menu buttons 1-3 .......134
Navigation Group ...............134
Focus and Record
Button ................................135
Soft Menu buttons 4-5 .......135
Ambient Light Sensor.........136
Power / Lock Switch ..........136
USB Power Port.................136
Charging / Battery Life............136
Charging Using Camera.....136
Charging Using USB
Connector ..........................136
Charge Status Indicator .....137
Battery Life Indicator..........137
Wireless Operation
Battery Life.........................137
Connecting / Removing ..........137
RED EPIC® Operation Guide
Version 1.4.0 SVN 29352 BETA
April 19, 2011
Physical .............................138
Wireless Communication...139
Power Up / Down...................140
Power UP........................... 140
Power DOWN ....................140
Recording...............................140
Accessing Camera Controls
/ Settings................................ 141
Changing Camera
Settings..............................141
Exiting Menus to Main
Screen ...............................141
APPENDIX F: 3D SETUP /
OPERATION ............................... 142
APPENDIX G: EXPOSURE –
USING FALSE COLOR AND
ISO .............................................. 143
Underexposure (~ 2 stops)..... 143
Overexposure (~ 2 stops) .......145
Appropriate Exposure ............148
Adjusting the ISO Rating........ 151
APPENDIX H: POST
PRODUCTION............................ 153
Software Tools .......................154
REDCINE-X®..................... 154
APPENDIX I:
TROUBLESHOOTING................ 155
No Media Attached ................ 155
Camera Firmware Upgrade
Hangs at Upgrading
Peripherals............................. 155
Apply Calibration Failed......... 155
Recording Halted: Record
Error - Shutdown ................... 155
Preset Could Not Be
Applied................................... 155
Power Spike Detected –
Shutdown............................... 156
APPENDIX J:
MAINTENANCE ......................... 157
Cleaning................................. 157
Camera and Accessory
Exterior Surfaces............... 157
Brain.................................. 157
LCD Screen....................... 157
EVF.................................... 157
REDmote Screen............... 158
Lenses............................... 158
Side Handle LCD............... 158
Electrical Contacts ............ 158
APPENDIX K: TECHNICAL
DATA.......................................... 159
Technical Specifications ........ 159
Brain Dimensions................... 160
Front View ......................... 160
Side View........................... 161
Top View ........................... 162
APPENDIX L: MENU MAPS ...... 163
Version 1.4.0 SVN 29352 BETA
22 ©2011 RED.COM INC. APRIL 19, 2011

hereof without obligation to notify any person of such revisions or changes. In no event shall RED, its
employees or authorized agents be liable to you for any damages or losses, direct or indirect, arising from
the use of any technical or operational information contained in this document.
COPYRIGHT NOTICE
© 2011 Red.com, Inc.
All trademarks, trade names, logos, icons, images, written material, code, and product names used in
association with the accompanying product are the copyrights, trademarks or other intellectual property
owned and controlled exclusively by Red.com, Inc.
TRADEMARK DISCLAIMER
All other company, brand and product names are trademarks or registered trademarks of their respective
holders. RED has no affiliation to, is not associated or sponsored with, and has no express rights in third-
party trademarks. MAC® and QuickTime® are registered trademarks of Apple, Inc. Intel® is the
registered trademark of Intel Corporation. Windows®, Microsoft Windows® and Windows Vista® are the
registered trademarks of Microsoft Corporation. AVID® is a registered trademark of Avid Technology, Inc.
NUKE is a trademark of The Foundry Visionmongers Ltd.
DISCLAIMER
RED® has made every effort to provide clear and accurate information in this Operation Guide, which is
provided solely for the user’s information. While thought to be accurate, the information in this document
is provided strictly “as is” and RED will not be held responsible for issues arising from typographical errors
or user’s interpretation of the language used herein that is different from that intended by RED. All safety
and general information is subject to change as a result of changes in local, federal or other applicable
laws.
RED reserves the right to revise this Operation Guide and make changes from time to time in the content
Version 1.4.0 SVN 29352 BETA
3
APRIL 19, 2011 ©2011 RED.COM INC.

COMPLIANCE
INDUSTRIAL CANADA EMISSION COMPLIANCE STATEMENTS
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio
and TV reception. The user is cautioned that changes and modifications made to the equipment without
the approval of manufacturer could void the user's authority to operate this equipment.
NOTE: This device complies with Part 15 of the FCC Rules.
Operations subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesirable
interference.
CAUTION: If the device is changed or modified without permission from RED, the user may void his
or her authority to operate the equipment.
Version 1.4.0 SVN 29352 BETA
44
©2011 RED.COM INC. APRIL 19, 2011

!
AUSTRALIA AND NEW ZEALAND STATEMENT
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to
EN 55022:2006
JAPAN STATEMENTS
This is a Class B product based on the standard of the Voluntary Control Council for
Interference (VCCI) for information technology equipment. If this equipment is used near a
radio or television receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
EUROPEAN UNION COMPLIANCE STATEMENTS
RED declares that the equipment described in this document is in conformance with
the requirements of the European Council EMC Directive 2004/108/EC, Low Voltage
Directive 2006/95/EC, RoHS Directive 2002/95/EC and WEEE Directive 2002/96/EC.
This declaration is based upon compliance of the product to the following standards:
xEN 55022, Information Technology Equipment -Radio Disturbance Characteristics
xEN 55024, Information Technology Equipment - Immunity Characteristics
xEN 61000-3-2, Limits for harmonic current emissions
xEN 61000-3-3, Limits for harmonic current emissions
xEN 60950-1, Information Technology Equipment – Safety
Version 1.4.0 SVN 29352 BETA
5
APRIL 19, 2011 ©2011 RED.COM INC.

The Waste Electrical and Electronic Equipment (WEEE) mark applies only to countries
within the European Union (EU) and Norway. This symbol on the product and
accompanying documents means that used electrical and electronic products should not
be mixed with general household waste. For proper treatment, recovery and recycling,
please take this product to designated collection points where it will be accepted free of
charge. Alternatively, in some countries you may be able to return your products to your
local retailer upon purchase of an equivalent new product.
Disposing of this product correctly will help save valuable resources and prevent any potential negative
effects on human health and the environment, which could otherwise arise from inappropriate waste
handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with you national
legislation.
For business users in the European Union, if you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further information.
Responsible party:
Red Digital Cinema.
20291 Valencia Circle
Lake Forest, CA 92630
USA
Version 1.4.0 SVN 29352 BETA
66
©2011 RED.COM INC. APRIL 19, 2011

BEFORE YOU START
Congratulations on your purchase of a RED EPIC® camera. Please read the attached safety instructions,
and only then unpack the camera body and any accessories. If there is any physical damage or missing
components for either your camera body or any accessories, please file a support ticket at
www.RED.com/support.
Figure 1: RED EPIC Camera
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE USING YOUR CAMERA
A. Heed all cautions and warnings in these instructions.
B. Read these instructions before operating the camera and accessories.
C. Follow these instructions while operating the camera and accessories.
D. Keep these instructions with the camera and accessories at all times.
E. DO NOT attempt to modify, dismantle or open your camera, lens or other accessory as doing so may
expose you to electric shock and serious injury. There are no user-serviceable parts inside. Alteration
or repairs made to the camera, lens or other accessory, except by a RED authorized service facility,
will void the Limited Warranty. Users are not permitted to make design changes or otherwise modify
the operation of the camera, lenses or other accessories, without the express written approval of RED
DIGITAL CINEMA.
F. Only use attachments/accessories specified by RED.
G. Install camera and accessories in accordance with the manufacturer’s instructions.
H. Avoid imaging of laser beams as they may cause damage to the sensor.
I. DO NOT use the camera or accessories near water. Avoid exposing your camera to moisture. The unit
is not waterproof, so contact with water could cause permanent damage to the unit as well as electric
Version 1.4.0 SVN 29352 BETA
7
APRIL 19, 2011 ©2011 RED.COM INC.

shock and serious injury to the user. DO NOT use the camera in the rain or under other conditions with
high moisture without appropriate protection, and immediately remove power source if camera or
accessories are exposed to moisture.
WARNING: To reduce the risk of fire or electric shock, do not expose the camera or accessories to
rain or moisture.
J. DO NOT expose your camera to excessive vibration or impact (shock). Be careful not to drop your
camera. Internal mechanisms may be damaged by severe shock. Mechanical alignment of optical
elements may be affected by excessive vibration.
K. ELECTROMAGNETIC INTERFERENCE: The use of devices using radio or other communication
waves may result in the malfunction or interference with the unit and/or with audio and video signals.
L. Clean only using a dry cloth. When cleaning your camera, remember that it is not waterproof and
moisture can damage electronic circuitry. DO NOT rinse or immerse any element of the camera, lens
or other accessory, keep them dry at all times. DO NOT use soaps, detergents, ammonia, alkaline
cleaners, and abrasive cleaning compounds or solvents. These substances may damage lens
coatings and electronic circuitry.
M. Maintain sufficient ventilation - DO NOT block any ventilation openings or obstruct cooling fan airflow.
CAUTION: Proper camera ventilation requires a minimum .5” (1,25cm) clearance between the
camera ventilation openings and external surfaces. Verify airflow is not impeded by objects that
block or cover the ventilation openings. Failure to permit adequate airflow may result in
overheating of the camera, degraded operation and in extreme situations, damage to the camera.
N. DO NOT operate or store near any heat sources such as radiators, heat registers, stoves, or any other
apparatus that produce heat. Store in a protected, level and ventilated place. Avoid exposure to
temperature extremes, damp, severe vibration, strong magnetic fields, direct sunlight or local heat
sources during storage. Remove any batteries from the camera before storage. Recommended
storage and usage temperatures for your camera, lenses and other accessories are:
a. Operating range: 0°C to +40°C (32°F to 104°F)
o Storage range: -20°C to +50°C (-4°F to 122°F)
If there are any performance issues with your camera or accessories when operating within this
temperature range, please file a support ticket on www.RED.com/support.
O. Do not bypass the third prong of the grounding-type plug on the power cord of the AC Power
Adapter. A grounding-type plug has two blades and a third “grounding” prong. The third prong is
provided for your safety. A grounding-type plug shall be connected to an outlet with a protective
earthen connection. If the grounding-type plug does not fit into your outlet, do not attempt to modify
the plug or outlet, consult a qualified electrician.
P. Protect all power cords from being pinched, walked on or driven over by a vehicle. Replace any power
cords suspected of sustaining damage due to crushing or other forms physical damage.
CAUTION: The power cord plug for the AC Power Adapter is used as the power disconnect. To
disconnect all power from the AC Power Adapter, unplug the power cord plug from the wall outlet.
During use, the power cord plug should remain easily accessible at all times.
Version 1.4.0 SVN 29352 BETA
88
©2011 RED.COM INC. APRIL 19, 2011

Q. Lithium Ion batteries may be subject to special handling requirements pursuant to federal and local
laws. Please refer to specific shipping instructions included with your battery regarding proper
transport of your battery. Do not handle your battery if it is damaged or leaking. Disposal of batteries
must be in accordance with local environmental regulations. For example, California law requires that
all rechargeable batteries must be recycled by an authorized recycle center. Storing batteries fully
charged or in high temperature conditions may permanently reduce the life of the battery. Available
battery capacity may also be temporarily lessened after storage in low temperature conditions.
WARNING: Do not expose the battery to excessive heat.
WARNING: Danger of explosion if an incorrect battery is charged with the RED Charger or is used
to power the camera and accessories. Replace only with the same or equivalent type battery.
CAUTION: Refer all service and repair to qualified RED service personnel. To reduce the risk of
electric shock, and damage to the camera or accessories, DO NOT attempt to perform any
servicing other than any procedures that are recommended in the operating instructions.
Version 1.4.0 SVN 29352 BETA
9
APRIL 19, 2011 ©2011 RED.COM INC.