REDGUM Brand RG622 User manual

redgumbrand.com.au
USER MANUAL
Please read and keep these instrucons
OVER BED / CHAIR TABLE
RG622
OCTOBER 2019

redgumbrand.com.au
REDGUM Brand owns the copyright to the Over Bed / Chair Table user manual.
Any informaon contained in this user manual shall not be photocopied, reproduced or
translated into any other languages without the prior wrien consent of REDGUM Brand.
REDGUM Brand strives to provide the highest quality products possible.
Products are subject to change without noce.
© Copyright REDGUM Brand 2019
REDGUM Brand is part of FOR-DE Group Pty Ltd

redgumbrand.com.au
CONTENTS
1. INTRODUCTION - INTENDED USE
2. PRODUCT OVERVIEW - FEATURES / SPECIFICATIONS
3. ASSEMBLY - UNPACK and INSPECT SUPPLIED PARTS
4. ASSEMBLY - ADJUSTMENT LEVER INSTALLATION
5. ASSEMBLY - PLATFORM INSTALLATION
6. ASSEMBLY - BASE INSTALLATION
7. OPERATION - HEIGHT ADJUSTMENT
8. OPERATION - LOCKING CASTORS
9. USAGE GUIDELINES - DO’s + DON’Ts
10. PRODUCT CARE - INSPECTIONS / CLEANING
11. WARRANTY
12. REDGUM BRAND PRODUCT RANGE

redgumbrand.com.au
INTRODUCTION
Thank you for purchasing this quality REDGUM Brand product.
If you have any issues or quesons about the Over Bed / Chair Table
please contact your supplier or REDGUM Brand direct:
T: [phone]
F: [phone]
E: [e-mail]
A: 1 Business Way, Malaga Western Australia 6090
INTENDED USE
This product has limitaons and should be used in accordance to these guidelines.
Failure to follow these guidelines may result in damage to the product and injury
to the user. It is the responsibility of the user to ensure the suitability of this product
for its intended use. The user should consult their appropriate healthcare
professional if unsure of the correct product usage for their unique circumstances.
Only use your Over Bed / Chair Table for the purpose for which it is intended, which
is as a lightweight plaorm that can posioned to suit the users individual
requirements.
IMPORTANT NOTE
This equipment MUST be assembled
by a competent person.
1.

redgumbrand.com.au
PRODUCT OVERVIEW
FEATURES
Plasc plaorm with retaining lip
Easy clean sealed plaorm surface
Posive locking adjustable height plaorm
Large adjustment lever
Praccal ‘U’ shaped base frame to t around chairs
Low clearance base to t under beds
Twin wheel locking castors
Beige Epoxy powder coated metal frame
Chrome mild steel upright
SPECIFICATIONS
(All dimensions shown are nominal)
Dimensions:
Plaorm Width: 825mm
Plaorm Depth: 425mm
Height: 820 - 1120mm
Base Frame Height: 100mm
Base Frame Width (internal): 640mm
Castors: Ø50mm plasc twin wheel locking Castors
Product Weight: 11kg
Maximum Weight Loading: 12kg - evenly distributed
Please contact REDGUM Brand if you would like any further informaon
on your Over Bed / Chair Table.
2.

redgumbrand.com.au
ASSEMBLY- UNPACK and INSPECT SUPPLIED PARTS
Ensure you have been supplied with the following parts:
PARTS:
IMPORTANT NOTE
Check the product for any visible damage. If you see any damage or suspect a fault, DO NOT
USE YOUR PRODUCT and contact your supplier for support.
3.
1 x PLATFORM
1 x
LONG BOLT
FASTENERS (Not shown to scale)
1 x UPRIGHT
1 x BASE
1 x LEVER
2 x
MEDIUM BOLT
6 x
SHORT BOLT
8 x
WASHER
1 x
NUT
2 x
SPACER
TOOLS SUPPLIED
- SMALL ALLEN KEY
- LARGE ALLEN KEY
- SPANNER

redgumbrand.com.au
4.
ASSEMBLY- ADJUSTMENT LEVER INSTALLATION
The height adjustment lever requires assembly prior to use. Please follow these steps:
1. Orientate the LEVER so it is the correct way up and right way round (refer to side view image),
2. Use the LONG BOLT to x lever in place,
3. Aach NUT - Use Small Allen Key and Spanner to ghten.
LONG BOLT
NUT
LEVER
IMPORTANT NOTE
Do not overghten nut.
Allow adjustment lever
to pivot freely.

redgumbrand.com.au
ASSEMBLY- PLATFORM INSTALLATION
The plaorm requires assembly prior to use. Please follow these steps:
1. Lay the PLATFORM on a at surface (mounng holes facing up),
2. Posion the UPRIGHT onto the plaorm (line up the holes),
3. Screw in 6 x SHORT BOLTS with WASHERS - Use Large Allen Key to ghten.
5.
SHORT BOLT
WASHER
PLATFORM
UPRIGHT

redgumbrand.com.au
6.
ASSEMBLY- BASE INSTALLATION
The base requires assembly prior to use. Please follow these steps:
1. Lay the ASSEMBLED PLATFORM and UPRIGHT on its side,
2. Orientate the BASE so it is the correct way up and right way round (refer to image below),
2. Using the 2 x MEDIUM BOLTS / WASHERS / SPACERS - Fix the base in place,
3. Use Large Allen Key to ghten bolts.
Fully insert base frame
SPACER WASHER
MEDIUM BOLT
IMPORTANT NOTE:
Spacers must be ed
between base and upright
PRIOR to fastening.

redgumbrand.com.au
OPERATION - HEIGHT ADJUSTMENT
To adjust the height of the Over Bed / Chair table:
To RAISE the plaorm height:
1. Pull the lever up,
2. Plaorm will rise automacally,
3. Release the lever to set the height.
To LOWER the plaorm height:
1. Pull the lever up,
2. Apply downward force to the
plaorm above the upright,
3. Release the lever to set the height.
7.
LEVER

redgumbrand.com.au
8.
OPERATION - LOCKING CASTORS
The Over Bed / Chair Table has 4 locking castors:
To LOCK the castor:
Using your foot - press DOWN
on the brake pedal.
To UNLOCK the castor:
Using your foot - push UP
on the brake pedal.
Fully insert base frame
To LOCK
To UNLOCK

redgumbrand.com.au
USAGE GUIDELINES - DO’s + DON’TS
Please follow these guidelines to get the opmal benet from your Over Bed / Chair Table.
Failure to follow these guidelines may result in damage
to the Over Bed / Chair Table and put the user at risk.
The Over Bed / Chair Table is designed
to take 12kg Maximum Load (evenly distributed).
Do not overload the table.
This product is designed
for INDOOR USE only.
Do not use this product as a walking aid
or as a sing / standing aid.
9.

redgumbrand.com.au
10.
PRODUCT CARE - INSPECTIONS / CLEANING
INSPECTIONS
We suggest that you check your Over Bed / Chair Table visually periodically for signs of
damage or wear prior to use. Overall check that no components are loose or worn.
Withdraw the Over Bed/ Chair Table immediately if you suspect damage
or any other fault. If in any doubt, please do not issue or use, but
immediately contact your supplier for service support.
IMPORTANT NOTE
Do not t any parts or accessories to your Over Bed / Chair Table that are manufactured
by another company. To do so will void your warranty and may seriously compromise
your safety.
CLEANING
Clean your Over Bed / Chair Table using a non-abrasive cleaner or mild detergent with a
so cloth.
Abrasive cleaners or abrasive cleaning pads could damage the Over Bed / Chair Table
and should not be used.

redgumbrand.com.au
11.
WARRANTY
Your REDGUM Brand:
RG622 - OVER BED / CHAIR TABLE
is covered by a 12 Month Warranty from the date of purchase.
If the product has any manufacturing faults during this period contact the place of
purchase for assessment. Failures as a result of ACCIDENTAL MISUSE, MODIFICATION
OR WEAR AND TEAR ARE NOT COVERED BY THIS WARRANTY.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entled to a replacement part for a major failure and for
compensaon for any other reasonably foreseeable loss or damage. You are entled
to have the goods repaired or replaced if the goods fail to be of acceptable quality
and failure does not amount to major failure.
If you have any issues or quesons about your Over Bed / Chair Table
please contact your supplier or REDGUM Brand direct on:
T: [phone]
F: [phone]
E: [e-mail]
A: 1 Business Way, Malaga
Western Australia 6090
Please keep this User Manual
in a safe place for future reference.

redgumbrand.com.au
REDGUM Brand - Product Range
REDGUM Brand oer a comprehensive range of products including:
Seat Walkers
Walking Frames
Wheelchairs
Walking Scks + Quads
Crutches
Reachers
Shower / Bathroom products
Toilet products
Cushions: Air / Foam
Electric Li Chairs
Electric Beds
Portable / Fixed Aluminium Ramps
Exercisers
Personal Alarms
REDGUM Brand stock a large range of Spare Parts for all REDGUM brand products.
Please contact REDGUM Brand for further informaon:
T: [phone]
F: [phone]
E: [e-mail]
A: 1 Business Way, Malaga Western Australia 6090
W: www.redgumbrand.com.au
12.

redgumbrand.com.au
DISTRIBUTOR:
Proudly Australian Owned and Operated