2
to rest for 30 minutes after automatic massage shut o before
restarting.
Weight Limits:
The recommended weight limits on the Reflexion®Arc are:
Twin Long / Full / Queen / 850 pounds.
Maximum weight the bed can support per person is 350 pounds with
the weight evenly distributed across the head and foot sections. This
product is not designed to support or lift this amount of weight in
the head or foot sections alone. NOTE: Exceeding the recommended
weight restrictions could damage your Reflexion®Arc and void
your warranty. For best performance, you should enter and exit the
Reflexion®Arc while it is in the flat or fully lowered position.
Reflexion®Arc fits easily inside bed frames, furniture beds and
platform beds that are certified to hold a minimum of 1000 pounds.
If using this adjustable base without the legs and placing directly on
a bed frame or platform bed, cross-bed supports (slats) are strongly
recommended to ensure Reflexion®Arc maintains stability during
operation.
Acoustics:
In normal base operation the wheels, which allow the bed to maintain
its distance from the wall, will make contact with the steel platform
supports of the base creating a contact noise. When entering, exiting
or shifting weight on the base, this contact noise may be audible as
the wheels make contact. This is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
whenever possible. For spot cleaning, wipe area with a light damp
sponge or vacuum with a soft brush attachment to remove particles.
Keep at a minimum of 30cm (12 inches) away from direct heat
sources.
For deeper cleaning, blot liquid spills with a clean dry cloth.
Wipe with a clean cloth dampened with warm water. Do not wet
excessively. A soft bristle brush may be used to remove ingrained
soil. Avoid scratching by gentle brushing. Wipe with a clean cloth
dampened with warm water to remove residues after brushing. Dry
in shade away from direct heat.
If persistent marks remain visible after cleaning, seek professional
advice.
safety precautions and usage statements
FCC Compliance:
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.'
CAN ICES-3 (B)/NMB-3(B)
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
