REFOX LM-80B User manual

项目：REFOX LM-40 MINI说明书
尺寸：10.5*16CM
材质：157g铜版纸
装订方式：风琴折页
日期：2022.1.7
LM-80B&LM-80E
Laser Machine
（Please be sure to read this manual carefully before use）
User Manual

REFOX LM-80B/LM-80E is a powerful and practical automatic laser
disassembly screen marking machine, built-in high-definition comput-
er, equipped with accurate drawings, supporting a variety of mobile
phone back covers marking and engraving of various objects. The
performance of the laser head is stable and reliable, and the imported
sensor is auto-focusing, one-button to start, simply operated. It is
widely used in the back cover glass refurbishment of the mobile phone
repair industry, especially suitable for small maintenance shops or the
repair shops in shopping malls.
Product Introduction

Product Diagram

Features
Packing List
Item
Laser Machine
Power Cord
Filter Element
Filiter Cotton
Keyboard
Mouse
Marking Test Cards
Hexagon Wrench
Quantity
X 1
X 1
X 2
X 2
X 1
X 1
X 5
X 1
Built-in operation system, no need for an external computer
Built-in fume extractor to prevent the spread of harmful smoke
Auto focus, convenient and precise
The design is light and saving space
Stable performance, low after-sale rate

Parameters
Product Name
Brand
Product Model
Voltage
Product Power
Laser Power
Marking Precision
Marking Speed
Cooling Mode
Laser Length
Marking Width
Marking Format
Marking Depth
Repeated Measurement
Product Size
Screen Size
Package Size
Net Weight
Gross Weight
Laser Machine
REFOX
LM-80B/LM-80E
110V/220V
500W
LM-80B:6W/LM-80E:20W
≤0.001mm
≤10000mm/s
Built-in cold air
1064nm
0.05-0.1mm
175mm*175mm
0.015-0.5mm
≤0.001mm
42.5*24*46cm
20*15cm
52.5*35*61cm
19.5kg
27kg

1. Connect to the power supply, turn on the power switch, and remove
the lens cover;
2. Press the "Laser" button; (the screen of LM-80B will light up till the
button is pressed )
3. Open the software and call up the corresponding drawings;
4. Place the phone along the fixed strip and turn on the Exhauster
switch;
5. Press the Focus button to automatically focus the point;
6. Click the red light to preview the target and adjust the parameters;
7. Start Marking button to start marking;
8. At the end of marking, remove the back cover glass of the phone.
(Note: If you need to use the keyboard to calibrate the red light position
or modify other settings, the login role in the upper right corner can be
switched to administrator, password:111111)
Steps for Usage

1. Do not modify the protective circuit of the machine and disassemble
the main parts of the laser machine at will;
2. The laser marking machine is not allowed to run empty without
materials;
3. If abnormal sound or other conditions occur during operation, turn off
the power and examine it immediately.
4. Each component of the laser marking machine needs to be started
step by step according to the description;
（You will take your own risk if you do not follow the instructions ）
5. Keep the working environment clean and tidy;
6. Keep the lens clean.
Attention

www.refoxteam.com