Regency FULL HEIGHT BUN PAN RACK User manual

(2) Pan Slide Frames
(6) Crossbars
• (4) Top/Mid (Long)
 • (2)Boom(Short)
(4) 5" Casters
(8) U Brackets
(12) Bolts
 • (8)10mm(Top/Mid)
 • (4)14mm(Boom)
FINAL PRODUCTINCLUDED PARTS
12/2021
BC
A
B
C
D
E
A
DE
REGENCYTABLESANDSINKS.COM
REGENCYREGENCY
Space SolutionsSpace Solutions
FULL HEIGHT
BUN PAN RACK
TOOLS NEEDED: An Adjustable Wrench OR 10mm and 14mm Socket are required for assembly.
Need Help?
Scan here to follow along
with the full assembly video!
ASSEMBLY INSTRUCTIONS

ASSEMBLING THE PAN RACK
REGENCYTABLESANDSINKS.COM
* NOTE:Besuretonotover-ghtenthebolts,oryoumaydamagetheFrameand/orCrossbars.
** NOTE:Makesuretheholeinthecasterpostisalignedwiththeholeinthecollar.
*** NOTE:TheboomCrossbarsdonotrequireUBrackets,theycanbeboltedondirectlythoughtheholeinthecollar.
4
3
5
Insertthe(4)Casters**intotheboomofthe
Frames.Thelockingcastersshouldbeinstalledin
thesameendoftheracksotheycaneasilybeset.
Repeatsteps1&2forthe(2)MiddleCrossbars.
Oncethecastersareproperlyaligned,the
remaining(2)ShortCrossbarscanbeinstalledon
theboomoftherackusingthe14mmBolts.***
6 7
Putabunpaninboththetopandboomofthe
racktoensureyourbunpanissquare.
Tighteneachboltwithawrench.Yourbunpan
rackisnowreadytouse.
12
Insert(2)LongCrossbarsintothetopholesofthe
PanSlideFrames.
AachUBrackets(2foreachCrossbar)andto
theoutsideofthePanSlideFramesusingthe
10mmBolts.Hand-ghtenthebolts*andrepeat
theprocessfortheotherside.